Surtime Low Profile Flush Mount Ceiling Fans with Lights and Remote and APP Instructions

: June 15, 2024
: SURTIME

Table of Contents

Low Profile Flush Mount Ceiling Fans with Lights and Remote and APP
Instructions
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Low Profile Flush Mount Ceiling Fans with Lights and Remote and APP
Instructions

Low Profile Flush Mount Ceiling Fans with Lights and Remote and APP

Steps 1 :click “Add” to set the name of the fan light.
Steps 2 and then press the Pair code check button 1-2 times within 5 seconds after the fan is powered on.
Note: If your APP interface is displayed in Chinese, click the menu in the upper right corner to switch languages

Instructions

Pair button. In order to ensure that the application can successfully control the device, please click this button within S seconds after the device is powered on. If the device flashes or beeps, it means that the phone has been successfully paired with the device, and then the device can be controlled through the application, or beeps it means that the phone has been successfully paired with the device, and then the device can be controlled through the application.
Click to select a time to turn off the device
The wind blown by the fan after clicking is like the wind in nature
The wind blown by the fan after clicking is suitable for sleep.
The fan will rotate reverse after clicking.
Click to change the direction of the wind
The tan wit rotate forward after clicking.
When you click, the white light and the yellow light will light up at the same time, but only at 10% 0f the maximum brightness
When clicked, the white light and yellow light will light at the same time, and the brightness will be the maximum brightness
When clicked, only yellow light will light up, and the brightness will be the maximum brightness
When clicked, only white light will light up, and the brightness will be the maximum brightness. Unpair button. Click this button within 5 seconds when the device is powered on, If the device flashes or beeps, it means that the phone is unpaired with the device and the phone will not be able to control the device
when in the room page, long press the device card you can delete the device or change the device name.