TECKNET TKMS007 Wireless Mouse User Manual
- June 15, 2024
- TECKNET
Table of Contents
TECKNET TKMS007 Wireless Mouse User Manual
Package Contents
- 1 × Wireless Mouse
- 1 x USB Nano Receiver
- 1 x User Manual
Note: Batteries NOT included.
Product Layout
- Left Click Button
- DPI Switch Button
- Scroll Wheel
- Right Click Button
- Forward Button
- Backward Button
- DPI Indicator
- On/Off Switch
- Battery Compartment
- USB Receiver
Specifications
Button Count: 6 Buttons
Operating Frequency: 2.4GHz
Operating Voltage: 3V
Operating Current: ≤6mA
Compatible Systems
- Windows 2000/2003/XP/Vista/7/8/8.1/10/11, Mac OS X 10.4 or later.
How to Use
The wireless mouse uses 2pcs AAA batteries (Batteries not included).
- Open the battery cover.
- Install the batteries into the compartment, ensuring they correspond with the polarity marking.
- Replace the battery cover.
- Switch on the mouse by adjusting the power switch underneath the mouse. The DPI indicator will flash.
Note
Make sure that the polarities of the batteries is correct. The positive (+) and negative (-) ends of each battery must match the positive (+) and negative (-) markings in the battery housing.
Take out the USB Nano receiver and plug it into a free USB port on your computer. The Plug & Play function of your system will detect that a new device has been connected and install it automatically.
Intelligent Power Saving (IPS)
The mouse is equipped with Intelligent Power Saving (IPS) function.
- When the USB Nano receiver is disconnected or the PC is switched off, the mouse will be switched off automatically for the purpose of power-saving.
DPI Switch
Press the DPI switch button to cycle through 5 DPI levels. The DPI indicator will flash the corresponding number of times.
Low Power Indicator
Battery Low: DPI indicator flashes
Re connection
There is a wireless signal connection code for this mouse. High temperatures, electro-magnetic fields or vibration may influence the code signal and occasionally the mouse may need to be reconnected. Both the mouse and Nano Receiver have a built-in code and one mouse can be connected to one receiver, or several mice to one Nano Receiver. The mouse and Nano Receiver may need to be reconnected if subjected to high temperature, electromagnetic fields or strong vibrations.
- Unplug the Nano receiver from the USB port, and plug it back in.
- Move the mouse to within 50cm of the Nano Receiver or re-install the batteries or press any key to reconnect; the above process must be completed in 15 seconds.
- The mouse will be ready for use after re connection.
What do I do if the response time of the mouse is slow or the mouse intermittently stops working?
- Ensure that the mouse is within the operational working distance (1.5m) from the USB Nano receiver and restart your PC.
- Increase the distance between the Nano receiver and the base units of other cordless devices.
- If you are using the mouse on a metal surface, move the mouse and the receiver to a non-metallic surface. Metals, such as iron, aluminium or copper, shield the radio frequency transmission and may slow down the mouse presenter’s response time or cause the mouse to fail temporarily.
I can not use the mouse while another wireless mouse is in use – what
should I do?
Please try “Re connection”.
IMPORTANT SAFETY INSTRUCTIONS-CAREFULLY FOLLOW THESE INSTRUCTIONS.
-
SAVE THESE INSTRUCTIONS – This sheet contains important safety and operating instructions.
-
Before using the product, read all instructions and caution markings on the product, accessories and device using our product.
-
This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
-
Children should be supervised to ensure that they do not play with the appliance.
-
Keep the product away from fire or explosion may occur.
-
Do not place the product in or near any inflammable, explosive or hazardous object.
-
Do not place in or near water, rain, excess moisture or extreme heat.
-
Do not operate the product with damaged cord or plug.
-
Do not operate the product if it has been damaged in any way.
-
Do not disassemble the product. Disassembly may result in a risk of safety hazards.
-
Do not throw or shake the product.
Limited 12-Month Warranty
What this warranty covers.
Shenzhen Unichain Technology Co., LTD. (Manufacturer: “Unichain”) warrants to
the original purchaser of this TECKNET product that the product shall be free
of defects in design, assembly, material, or workmanship.
What the period of coverage is.
Unichain warrants the TECKNET product for 12 Months. What will we do to
correct problems? Unichain will repair or replace, at its option, any
defective product free of charge (except for shipping charges for the
product).
What is not covered by this warranty?
All above warranties are null and void if the TECKNET product is not provided
to Unichain for inspection upon Unichain’s request at the sole expense of the
purchaser, or if Unichain determines that the TECKNET product has been
improperly installed, altered in any way, or tampered with. The TECKNET
Product Warranty does not protect against acts of God such as flood,
earthquake, lightning, war, vandalism, theft, normal-use wear and tear,
erosion, depletion, obsolescence, abuse, damage due to low voltage
disturbances (e.g. brownouts or sags), non-authorized program, or system
equipment modification or alteration.
How to claim the warranty
Please contact retailers or visit TECKNET website or email support@teckne-
tonline.com for more information. To extend the warranty period, please visit
TECKNET website and register your TECKNET products within 90 days of
purchase.
Disclaimer
Every effort has been made to ensure that the information and procedures in this guide are accurate and complete, no liability can be accepted for any errors or omissions and we reserve the right to make any changes without further notice to any products mentioned herein.
Correct Disposal of This Product
(Waste Electrical& Electronic Equipment) This Marking shown on the product or its literature, indicate that it should not be disposed with other household wastes at the end of its working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources.Household user should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take this item for environmentally safe recycling. Business users should contact their supplier and check the terms and conditions of the purchase contact. This product should not be mixed with other commercial wastes for disposal.
SIMPLIFIED EU DECLARATION OF CONFORMITY
Hereby, Shenzhen Unichain Technology Co., Ltd. declares that the product type
TK-MS007 is in compliance with Directive 2014/53/EU. The full text of the EU
declaration of conformity is available at the following internet address:
https://eu.tecknetonline.com/
FCC STATEMENT
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
- Reorient or relocate the receiving antenna.
