Stone Mountain B02PTT TruBlu Bluetooth Microphone User Manual
- June 15, 2024
- Stone Mountain
Table of Contents
Stone Mountain B02PTT TruBlu Bluetooth Microphone
Product Information
Specifications
- Primary Function: Power On/Off, Pairing
- Additional Function: Engage PTT in supported apps
- Power Button: Power On/Off, Pairing
- PTT Button: Engage PTT in supported apps
- Volume Up Button: Control volume of paired device
- Volume Down Button: Control volume of paired device
- LED Indicator: Indicates power status and pairing mode
- 5V Micro USB Charging Port: For charging the microphone
- 3.5mm Audio Jack: For discrete communication and playing media from the paired device
Operating the Headset
- Power On: Press and hold the power button for two (2) seconds and release. The LED will briefly turn purple, then blink red once. The headset will audibly say “Power On,” accompanied by a beep. The LED will then blink blue.
- Power Off: Press and hold the power button for four (4) seconds. The LED will briefly turn purple, and audibly say “Power Off.”
- Pairing: Power off the headset. Press and hold the power button for six (6) seconds and release when the LED starts flashing red and blue. Follow the instructions of the device/phone to connect and pair the headset, selecting “B02PTT.” Upon successful pairing, the headset will audibly say “Pairing successful,” followed by “Connected” along with a short beep.
- Transmitting Audio (Tx): To transmit audio, press the PTT button, and speak into the microphone. To avoid distortion, keep the microphone approximately 6 inches from your mouth. Release the PTT button when finished transmitting.
- Receiving Audio (Rx): Incoming audio will automatically be received and played through the accessory attached to the 3.5mm audio jack.
- Phone Call Control: Press the power button to answer or terminate an incoming call. To reject an incoming call, quickly double-press the power button.
- Media Control: When playing music or other media, press the power button to play and pause media. Press the Volume Up button to switch to the next item in the playlist and press the Volume Down button to switch to the previous item in the playlist.
Stone Mountain TruBlu™ Bluetooth® Microphone l
The Stone Mountain TruBlu™ Bluetooth® microphone is a compact wireless microphone that supports Android and iOS devices running Push to Talk (PTT) applications1 as well as full duplex phone calls2. The 3.5mm audio jack allows for discrete communication, as well as playing media from the paired device3.
Starting Out
Charge the microphone for at least two (2) hours prior to first use. The LED will turn red to indicate charging, and blue to indicate that charging is complete. When plugged in to charge, the microphone will reset and power off.
Product Overview
| Button | Primary Function | Additional Function |
|---|---|---|
| Power Button | Power On/Off, Pairing | · Play/Pause Music |
· Call Answer/Reject
PTT Button| Engage PTT in supported apps| N/A
Volume Up| Long Press: Increase volume of paired device| Short Press: Media
Control – Next Song
Volume Down| Long Press: Decrease volume of
paired device
| Short Press: Media Control – Previous Song
Notes:
- Supports major OEM PTT applications including Zello, Zebra, ESChat, Wave, etc.
- Cellular service required.
- This headset does not have an integrated speaker. All audio must be routed through an accessory connected to the 3.5mm audio jack.
Operating the Headset
- Power On: Press and hold the power button for two (2) seconds and release. The LED will briefly turn purple, then blink red once. The headset will audibly say “Power On”, accompanied by a beep. The LED will then blink blue.
- Power Off: Press and hold the power button for four (4) seconds. The LED will briefly turn purple, and audibly say “Power Off”.
- Pairing: Power off the headset. Press and hold the power button for six (6) seconds and release when the LED starts flashing red and blue. Follow the instructions of the device/phone to connect and pair the headset, selecting “B02PTT”. Upon successful pairing, the headset will audibly say “Pairing successful”, followed by “Connected” along with a short beep.
- Transmitting Audio (Tx): To transmit audio, press the PTT button, and speak into the microphone. To avoid distortion, keep the microphone ~6” from your mouth. Release the PTT button when finished transmitting.
- Receiving Audio (Rx): Incoming audio will automatically be received and played through the accessory attached to the 3.5mm audio jack.
- Phone Call Control: Press the power button to answer or terminate an incoming call. To reject an incoming call, quickly double-press the power button.
- Media Control: When playing music or other media, press the power button to play and pause media. Press the Volume Up button to switch to the next item in the playlist and press the Volume Down button to switch to the previous item in the playlist.
Stone Mountain, Ltd. 1597 Eagle Point Road Huddleston, VA 24104
- Customer Support: 540.297.6434 x200 www.stonemountainltd.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>