SQUARE D NQNCC IP2X Fingersafe NQ Panelboards Instruction Manual

SQUARE D NQNCC IP2X Fingersafe NQ Panelboards

Product Information

Specifications

• Model: 80043-826-01
• Date: 11/2015
• Manufacturer: Schneider Electric
• Trademark: Square D
• Country of Origin: USA

Product Usage Instructions

Neutral Cover Removal and Installation

1. Remove the trim-front assembly and dead-front assembly by referring to the instruction bulletin 80043-831-01.
2. To remove the neutral cover, unsnap the upper and lower corners of the cover by pulling in the indicated direction.
3. Rotate and pull the cover as shown.
4. To re-install the cover, align the neutral cover mounting hooks to the main cover mounting holes.
5. Rotate the cover in place until the snaps are engaged.
6. Replace the dead-front assembly and trim-front assembly by referring to the instruction bulletin 80043-831-01.

FAQs

1. Who should install, operate, service, and maintain the electrical equipment?

The electrical equipment should be installed, operated, serviced, and maintained only by qualified personnel.

2. What are the trademarks owned by Schneider Electric?

Schneider Electric and Square D are trademarks owned by Schneider Electric Industries SAS or its affiliated companies.

3. What are the potential hazards associated with this product?

This product can expose you to chemicals including Nickel compounds, which are known to the State of California to cause cancer, and Bisphenol A (BPA), which is known to the State of California to cause birth defects or other reproductive harm. For more information, please visit www.P65Warnings.ca.gov .

DANGER

HAZARD OF ELECTRIC SHOCK, EXPLOSION, OR ARC FLASH

• Apply appropriate personal protective equipment (PPE) and follow safe electrical work practices. See NFPA 70E, CSA Z462, or NOM-029-STPS.
• This equipment must only be installed and serviced by qualified electrical personnel.
• Turn off all power supplying this equipment before working on or inside equipment.
• Always use a properly rated voltage sensing device to confirm power is off.
• Replace all devices, doors and covers before turning on power to this equipment.

Failure to follow these instructions will result in death or serious injury

Neutral Cover Removal and Installation

1. Remove trim-front assembly and dead-front assembly; refer to Removing the Trim-Front Assembly and Dead-Front Assembly, in instruction bulletin 80043-831-01.
2. To remove the neutral cover, unsnap the upper and lower corner of the cover, pulling in the direction shown.
3. Rotate and pull the cover as shown.
4. To re-install the cover, align the neutral cover mounting hooks to the main cover mounting holes.
5. Rotate in place until the snaps are engaged.
6. Replace the dead-front assembly and trim-front assembly; refer to Replacing Dead-Front Assembly and Trim-Front Assembly, in instruction bulletin 80043-831-01.

Electrical equipment should be installed, operated, serviced, and maintained only by qualified personnel. No responsibility is assumed by Schneider Electric for any consequences arising out of the use of this material. Schneider Electric and Square D are trademarks owned by Schneider Electric Industries SAS or its affiliated companies. All other trademarks are the property of their respective owners Schneider Electric USA, Inc. 800 Federal Street Andover, MA 01810 USA

• 888-778-2733
• www.schneider-electric.us

California Proposition 65 Warning

WARNING: This product can expose you to chemicals including Nickel compounds, which are known to the State of California to cause cancer, and Bisphenol A (BPA), which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.All trademarks are the property of Schneider Electric SE, its subsidiaries, and affiliated companies. Schneider Electric USA, Inc. 800 Federal Street Andover, MA 01810 USA 888-778-2733

www.schneider-electric.us

References

• P65Warnings.ca.gov
• Schneider Electric Canada | Global Specialist in Energy Management and Automation
• Schneider Electric Mexico | Servicios de Renovación y Retrofit de Schneider Electric

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>