SQUARE D XD Series Wall Plates Instruction Manual
- June 9, 2024
- SQUARE D
Table of Contents
Instruction
Bulletin
XD Series Wall Plates
DANGER
HAZARD OF ELECTRIC SHOCK, EXPLOSION, OR ARC FLASH
Turn of all power before working on or inside electrical equipment.
Failure to follow these instruction will result in death or serious injury.
Installation
-
Turn the power OFF. (Figure 1)
-
Remove cover from frame. (Figure 2)
-
Attach frame to the device, keeping slot(s) at the bottom.
Do not over tighten screws. (Figure 3) -
Install top of cover to frame.
Snap on bottom edge. (Figure 4)
Schneider Electric USA, Inc.
800 Federal Street
Andover, MA 01810 USA
888-778-2733
www.se.com/us| Schneider Electric México,
S.A. de C.V.
Calzada Javier Rojo Gomez 1121-A,
Guadalupe del Moral, Iztapalapa, Ciudad de México, CP 09300.
55-5804-5000
www.se.com/mx| Schneider Electric Canada,
Inc.
5985 McLaughlin Road
Mississauga, ON L5R 1B8 Canada
800-565-6699
www.se.com/ca
---|---|---
Documents / Resources
|
SQUARE D XD Series Wall
Plates
[pdf] Instruction Manual
XD Series Wall Plates, XD Series, Wall Plates, Plates
---|---
References
- Schneider Electric Canada | Global Specialist in Energy Management and Automation
- Schneider Electric Mexico | Servicios de Renovación y Retrofit de Schneider Electric
- Schneider Electric USA | Global Specialist in Energy Management and Automation