amber connect AVM900 Single Channel 2K HD WiFi Dashcam User Guide

amber connect AVM900 Single Channel 2K HD WiFi Dashcam

Product Information

Specifications

cigarette lighter connector)
Vibration Detection| Yes
Date Stamp| Yes
Interface| MicroSD/TF Card
Power Interface| Built-in Microphone
Built-in Speakers| Yes
Light Frequency| 50HZ/60HZ
Power| Vehicle Power DC Power Cable
Operating Environment| Operating Temperature: 8°C to 40°C
Storage Temperature: -20°C to 70°C
Operating Humidity: Up to 85% non-condensing

Product Usage Instructions

Integration with the Amber Connect App
To integrate the dashcam with the Amber Connect App, follow these steps:

1. Turn on the vehicle’s ignition for the dashcam to enter the working state.
2. Find the WiFi network of the device on your smartphone. The WiFi name will show something like AVM900-XXXXXX. The default password is 12345678.
3. After the connection is completed, login to the Amber Connect app, and the time of the recorder will be synchronized with the time of the current mobile phone.
4. In addition, it is necessary to operate and format the TF card on the app. It must be formatted for the first use on the product, and it must be formatted one to three times a month regularly.

Installation Guide
Follow these steps to install the dashcam:

1. Switch off the car engine.

2. Insert the TF card into the recorder card slot. Note: Please use the TF memory card produced by a regular manufacturer. You can choose a memory card with a capacity of 8GB-512GB and a read/write speed not lower than U1/Class10.

3. Fix the recorder on the front windshield of the car’s original rearview mirror.

4. Connect the car adapter to the car battery. Connect the Yellow wire to VCC, the red wire to the ACC ignition wire, and the black wire to the ground wire.

5. Use the charging extension cable to connect the USB interface of the recorder to the corresponding position of the car fuse box.
   Note: The charging extension cable can be laid along the edge of the car windshield when wiring.

6. Adjust the position of the lens to make sure it is leveled with the ground.

7. Start the engine and check if the dashcam is installed correctly. Note: When the dashcam is installed correctly, the system will indicate the signal to work, and it will enter the recording state once the dashcam is turned on, and the display will show that it is recording. Please pay attention to check whether the picture on the display screen is normal. If the displayed picture is an inverted image, please adjust the image inversion through the app in time.

FAQ

• What is the recommended capacity for the memory card?
  The recommended capacity for the memory card is 8GB-512GB.

• Can I use any TF memory card with the dashcam?
  No, please use a TF memory card produced by a regular manufacturer with a read/write speed not lower than U1/Class10.

• How often should I format the TF card?
  The TF card should be formatted for the first use on the product, and it should be formatted one to three times a month regularly.

• Can I use the parking mode with a cigarette lighter connector?
  No, the parking mode is only available with the fuse box version.

Device Appearance And Physical Features

(Pictures are for reference only, please refer to the actual object)

1. 3M Adhesive Tape
2. Multi-purpose Button
3. Camera Lens
4. Speaker & Microphone
5. USB Port
6. MicroSD Card (TF) Slot
7. Recording Indicator

Button Function Description:

• Short press multi-purpose button button:
  • a. To format the memory card for the first time when using a new card.
  • b. To lock the video
• Long press multi-purpose button: To power on or power off.

Product Specifications

Specifications

Name| AVM900
Technology| WiFi
Pixels| 4.0 Megapixels
Lens| 135 Degree Ultra Wide Angle
Resolution| 2K or 1080p
Storage Compression| H.264
Video File Format| TS-MPEG2
Picture File Format| JPG
WiFi| Yes
G-Sensor| Yes
Loop Recording| Yes
Parking Mode| Yes (Only with fuse box version, not available when using cigarette lighter connector)
Vibration Detection| Yes
Date Stamp| Yes
Interface

MicroSD/TF Card| Up to 512 GB (Not Included, Optional)
Power Interface| USB Type-C
Built-in Microphone| HiFi Microphone
Built-in Speakers| 8Ω 1W
Light Frequency| 50HZ/60HZ
Power
Vehicle Power DC| 12V
Power Cable| Standard:3.4 metres fuse box connector Optional: Cigarette lighter connector
Operating Environment
Operating Temperature| -20°C to +70°C
Storage Temperature| -30°C to 80°C
Operating Humidity| 15-65%RH

Download the mobile APP

• iOS https://apps.apple.com/in/app/amber-connect/id919995727
• Android https://play.google.com/store/apps/details?id=com.amberconnect

Integrating Dashcam with the Amber Connect App

• Turn on the vehicle’s ignition for the dashcam to enter the working state, the find the WiFi network of the device on your smartphone. The WiFi name will show something like “AVM900-XXXXXX”. The default password is 12345678.
• After the connection is completed, login to the “Amber Connect” app, and the time of the recorder will be synchronized with the time of the current mobile phone.
• In addition, it is necessary to operate and format the TF card on the app. (It must be formatted for the first use on the product, and it must be formatted one to three times a month regularly).

Installation Guide

Suggested installation schematic diagram:

• Switch off the car engine
• Insert the TF card into the recorder card slot.

Note: Please use the TF memory card produced by the regular manufacturer, you can choose the memory card with a capacity of 8GB-512GB and a read/write speed not lower than U1/Class10.

• Fix the recorder on the front windshield of the car’s original rearview mirror.
• Connect the car adapter to the car battery, connect the Yellow wire to VCC, the red wire to the ACC ignition wire, and the black wire to the ground wire.
• Use the charging extension cable to connect the USB interface of the recorder to the corresponding position of the car fuse box.

Note: The charging extension cable can be laid along the edge of the car windshield when wiring.

• Adjust the position of the lens to make sure the lens is leveled with the ground.
• Start the engine and check if the dashcam is installed correctly.

Note: When the dash cam is installed correctly, the system will indicate the signal to work; and it will enter the recording state once dash cam is turned on, and the display will show that it is recording.

**Please pay attention to check whether the picture on the display screen is normal. If the displayed picture is an inverted image, please adjust the image inversion through the APP in time.

Need help? Contact 24/7 live support!

In App Chat:
support@amberconnect.com
Chat via website www.amberconnect.com
Works with Android phones and tablets, iPhone, iPad. Compatible with Chrome, Mac and PC web browsers.
Scan this QR code to download your App
©2024 Amber Connect Limited. All rights reserved.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>