Archer 1250-BAY Electric Fires Landscape Range Instruction Manual

Electric Fires
1250 Landscape Range
MODEL 1250 – BAY MK II
SPECIFICATION SHEET

Version 1 15/07/23
Contents of manual may be updated without notice.
For the latest version of this manual please refer to our website: www.archergaslogfires.com.au

Archer Electric 1250 Landscape Glass Fronted

APPLIANCE DIMENSIONS
Product Code:

FRAME BUILD OUT DIMENSIONS (All dimensions are in millimetres)

DIMENSION NOTES:
C- CAVITY DEPTH INCLUDES 10MM BACK CLEARANCE.
H- HEIGHT INLUDES 50MM TOP CLEARANCE.

PLEASE NOTE: DIMENSIONS ARE FOR REFERENCE ONLY – CONSULT YOUR INSTALLER AND RETAILER FOR GUIDANCE

Archer Electric1250 Landscape Bay

APPLIANCE DIMENSIONS
Product Code:

FRAME BUILD OUT DIMENSIONS (All dimensions are in millimetres)

DIMENSION NOTES:
C- CAVITY DEPTH INCLUDES 10MM BACK CLEARANCE.
H- HEIGHT INLUDES 50MM TOP CLEARANCE.

PLEASE NOTE: DIMENSIONS ARE FOR REFERENCE ONLY – CONSULT YOUR INSTALLER AND RETAILER FOR GUIDANCE

Archer Electric1250 Landscape Left Corner Glass

FRAME BUILD OUT DIMENSIONS (All dimensions are in millimetres)

DIMENSION NOTES:
C- CAVITY DEPTH INCLUDES 10MM BACK CLEARANCE.
H- HEIGHT INLUDES 50MM TOP CLEARANCE.PLEASE NOTE: DIMENSIONS ARE FOR REFERENCE ONLY – CONSULT YOUR INSTALLER AND RETAILER FOR GUIDANCE

Archer Electric1250 Landscape Right Corner Glass

FRAME BUILD OUT DIMENSIONS (All dimensions are in millimetres)

DIMENSION NOTES:
C- CAVITY DEPTH INCLUDES 10MM BACK CLEARANCE.
H- HEIGHT INLUDES 50MM TOP CLEARANCE.

PLEASE NOTE: DIMENSIONS ARE FOR REFERENCE ONLY – CONSULT YOUR INSTALLER AND RETAILER FOR GUIDANCE

Archer Electric 1250 Landscape

Note: Above given dimensions are for frame structure only.

EXPLODED VIEW

Archer Electric 1250 Landscape

POSITIONING YOUR APPLIANCE

NOTE:

No fixtures are supplied to secure the appliance to the chosen wall. Ensure an appropriate fixing method is used depending on the construction material of the wall.

• When installing into a wall cavity space, a stud work enclosure should be built to house the appliance. Refer to frame out build sheet.
• Finish the enclosure in the chosen material ensuring cladding are pushed up to the edge frame around the glass of the unit.
• If your appliance is not level when installed the glass corner fit will be misaligned.

CAUTION

TELEVISION INSTALLATION MANDATORY REQUIREMENTS

When fitting a television above the fireplace the following installation must be adhered to.
Debry and dust will fall into the fan slots above the appliance causing damage unless protected. It is a requirement to set a shelf as shown below.

• Shelf to be made during framing

CAUTION : Appliance warranty will be void if the shelf or deflector plate is not installed.

The above table contains the minimum opening
A = Width to outside of plaster flanges
B = Height to outside of plaster flanges
C = Height of fire (min)
D = Depth from front of fire body to rear of side plaster flange
E = Depth of fire (+1MM TOL)
F = Height of fire above top plaster bead
G = Min height from underside of adjustable foot to underside oflower plaster flange

Archer Electric Fires
N/71-73 Overseas Dr,
Noble Park VIC 3174
www.archergaslogfires.com.au
+613 9795 8895

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>