PHONAK Roger Wall Pilot User Guide
- June 15, 2024
- PHONAK
Table of Contents
PHONAK Roger Wall Pilot
Components and functions
Roger Wall Pilot
-
On / off
-
Display
-
Case
-
Screw to lock the case
-
Button to remove case
-
Power cable opening
-
Backplate
-
Mini-USB connector
-
Screws (3x) and anchors (2x)
-
Key (2x)
Components and functions
Power supply
US/EU adapter
Package contents may vary slightly depending on your country
Optional: UK/AU adapter
Wall mounting Roger Wall Pilot
- Or head level of user group
Switching Roger microphone on
Switching Roger Wall Pilot on
Setting up a Roger microphone in the classroom network
RM; Roger microphone
RM = Connected Roger microphone.
in classroom network
Automatically connecting Roger receivers to the classroom
Classroom network
RM = Roger microphone
R = Connected Roger ear-level receiver
M = Connected Roger My Link receiver
Roger ear-level receivers and Roger My Link connected to classroom network
Classroom network
RM = Connected Roger ear-level receiver
R = Connected Roger ear-level receiver
M = Connected Roger My Link receiver
Adjusting the operating range
Locking Roger Wall Pilot Roger
Several Roger Wall Pilot in the same room
Battery- powered mode
Charging Roger Wall Pilot
Operating time
- Up to 12 hours
Trouble shooting: Creating a new Network
The settings should not be changed.
All previous settings will be deleted.
This feature is useful for troubleshooting some issues.
Network compatibility
Only Roger devices are compatible with Roger Wall Pilot.
Use Roger Touchscreen Mic or Roger in Spiro to check Roger device’s firmware
version.
Operating conditions
+0° to +40° Celsius / +32° to + 104° Fahrenheit < 95% (non condensing) relative humidity.
Manufacturer:
Phonak Communications AG Laenggasse 17 CH-3280 Murten Switzerland
EU Representative :
Phonak GmbH
D-70736 Fellbach-Oeffingen
Germany
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>