EPSON 111-56-QUM-013 Trueorder KDS Multi Station User Guide
- June 15, 2024
- Epson
Table of Contents
EPSON 111-56-QUM-013 Trueorder KDS Multi Station
Order Timers
About this Guide:
This guide consists of 2 sections:
- Overview – A description of what Order Timers are in an Epson True Order Kitchen Display System (KDS).
- How to Configure Order Timers – A procedure that can be followed to configure this in a Single or Multi-Station KDS system.
Overview
Order timers allow the order tile header color to change at configured time
intervals. The header supports 3 colors: Normal – for incoming orders,
Priority, and Rush. Colors are configurable in the Ticket Configuration for
that display and different times can be configured for each display in your
system.
EPSON is a registered trademark and EPSON is a registered logomark of Seiko Epson Corporation. All other product and brand names are trademarks and/or registered trademarks of their respective companies. Epson disclaims any and all rights in these marks. Copyright 2023 Seiko Epson Corporation.
How to Configure Order Timers
This guide assumes that you already have a Multi-Station setup as described in the Epson True Order KDS Multi-Station Quick Start Guide. However, the steps can be followed to apply this to displays in other KDS configurations.
-
Configure Order Timer
-
Select Layout.
-
Select Grids.
-
Choose the Grid you want to configure (e.g., Kitchen).
-
Scroll down to Actions.
-
Under Priority Time, set the time (minutes and/or seconds) that will prompt the Display Tile to change to the Priority color.
-
Under Rush Time, set the time (minutes and/or seconds) that will prompt the Display Tile to change to the Rush color.
-
Click Save.
-
Click Publish.
Customers Support
Order Timers
Quick User Manual
111-56-QUM-013
Rev 3.00
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>