Fengyan PS4 Wireless Game Controller User Manual
- June 15, 2024
- Fengyan
Table of Contents
PS4 WIRELESS GAME CONTROLLER
MODEL: P4
PRODUCT OVERVIEW
This product is a wireless controller for the PS4.
It adopts wireless connection, a high-sensitivity six-axis detectionsystem,
full-color LED lights to display different players, and functions such as
touch, speaker, and voice input.
PRODUCT FEATURES
- Platform: PS4, PC, iOS, Android.
- Wireless connection/ Wired connection
- Buttons: PS, SHARE, OPTIONS, touch buttons, up, down, left, right, X, o, 0, 2, L1,12,13, R1, R2, R3, left 3D joystick, right 3D joystick.
- LED Indicator: Full-color LED indicates different players or different states.
- Interface: a Micro B port can be charged, data can also be updated online, a headphone plus microphone interface, and an expansion connection port.
- Support dual motor vibration
- The PS4 console platform has a sensor six-axis somatosensory function.
- Support dual-point capacitive sensing touch control
- Built-in mono speaker function
- Support wired PC mode.
INSTRUCTIONS FOR CONNECTING THE CONSOLE
CONNECT TO PS4
- You must use a wired connection to connect to the console for the first time. After the connection is successful, unplug the wired controller to automatically Wireless connect to the console. Afterwards, press the PS button on the controller to automatically connect to the console. After multiple controllers are connected to the console, the color of the light on each player’s controller is different
- Wired connection to the PS4 console, just plug the USB data cable into the PS4 console.
WIRELESS CONNECT TO OTHER EQUIPMENT
Press and hold the Share + PS button on the controller for 5 seconds, the
controller will enter the Wireless pairing mode, and the indicator light of
the controller will flash white quickly and double. You can use Wireless to
connect to PC, TV, Android, and i0S devices; the Wireless name of the
controller on PC, TV, and Android mobile phones is Wireless Controller; the
Wireless name on i0S devices is DUALSHOCK 4 Wireless Controller.
WIRED CONNECTION TO PC
Directly use the USB data cable to connect the controller to the USB interface
of the PC computer. After the connection is successful, it will be displayed
as a Wireless Controller device.
FUNCTION DESCRIPTION
AUDIO FUNCTION
Amono speaker is provided on the controller, and some game voice commands.
will be sent out through the speaker without interfering with the music and
sound effects of the game itself. At the same time, there is also a 3.5mm
stereo headphone jack on the controller. Players can choose the audio output
type of this interface in the system: individual voice or all sound effects.
SIX-AXIS FUNCTION
The Six-axis is composed of a three-axis gyroscope and a three-axis
acceleration sensor. Divided into X, Y, Z, Roll, Pitch, Yaw, a total of six
axes. X axis:
Accelerated movement in the left and right direction (X+/X- direction), left —
right, right — left. Y axis: Accelerated movement in the front and rear
directions (Y+/Y- direction), front—back, back—front. Z axis: acceleration
movement in the up and down direction (Z+/Z- direction), up—+down, down—up.
Roll axis: Rotate up and down around the Y axis. Pitch axis: Rotate forward
and backward around the X axis.Y axis, rotate left and right around the Z
axis.
EXTENSIONS
There is an EXT expansion interface on the controller, which can extend the
special charging stand and charge the controller through the EXT interface.
The expansion port supports the button attachment on the back of the PS4
controller officially launched by PS.
TOUCH FUNCTION
The upper middle of the front of the controller is the touch control area. The
touch adopts capacitive two-point touch sensing, which can automati-cally
identify single-finger touch and two-finger touch. Touch anywhere in the
control area and press
ELECTRICAL CHARACTERISTICS
Sleep Current: 8.3uA
Working Current: 49.8MA
Working Time: =7 hours (depending on the game environment)
Product Weight: ~210g
Battery Capacity: 600mAh
FCC Warning
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. Any changes or
modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by tuming the equipment off and
on, the user is encouraged to try to comrect the interference by one or more
of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The
device can be used in portable exposure condition without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>