anko 91 cm Animated Light Up Halloween Scary Ghost Decoration Light Instructions

Table of Contents

Specifications

The 91cm scary ghost is a spooky decoration item that adds an eerie touch to any Halloween-themed event or haunted house.
With its realistic design and creepy appearance, it is sure to frighten your guests!
This product is made of high-quality materials to ensure durability and longevity.

Unboxing

When you receive the 91cm scary ghost, carefully remove it from the packaging.

Assembly

The scary ghost comes in multiple parts for easy storage. To assemble the product, follow these steps:

Locate the body of the ghost.
Attach the head to the body using the provided connectors or Velcro.
If applicable, attach any additional accessories or limbs according to the instructions.

Placement

Power Source (if applicable)

If the scary ghost requires a power source for additional features such as lights or sound, follow these steps:

Check if the product requires batteries or needs to be plugged into an electrical outlet.
If batteries are needed, open the battery compartment and insert the required batteries, following the polarity markings.
If the product needs to be plugged in, ensure you have a nearby electrical outlet and use an appropriate extension cord if necessary.

To keep your scary ghost in good condition, follow these maintenance tips:

Keep the product away from direct sunlight and moisture to prevent any damage.
If the ghost becomes dirty, gently wipe it with a damp cloth using mild soap if necessary. Do not submerge it in water.
After usage, disassemble the ghost and store it in a dry place to avoid any potential damage.

Q1: Is the scary ghost suitable for outdoor use?
A1: Yes, the scary ghost is designed to be used both indoors and outdoors. However, it is recommended to avoid exposing it to heavy rain or extreme weather conditions.
Q2: Can I adjust the height of the scary ghost?
A2: No, the height of the scary ghost is fixed at 91cm and cannot be adjusted.
Q3: Does the scary ghost make any sounds?
A3: The scary ghost itself does not produce any sounds. However, some models may come with additional features like sound effects. Please refer to the product description or packaging for more information.

91cm scary ghost

Step 1. Insert the upper part body (Part A) into the bottom part (Part B).
Step 2. Place the long screw and screw nut into the correct position through the legs screw hole. Use a screwdriver (not included) to tighten the long screw into the leg screw hole and screw nut, tighten the screw until the screw is inside the leg hole.
Step 3. Pose the Ghost in arms open position. Make sure no excess fabric is on the light sensors. (Refer Figure 1)
Step 4. The ON/OFF/DEMO switch is located on the back of the upper body. Move the switch to the “On” position to place the product into Motion Activated Mode.
Step 5. Place the switch into the OFF position and remove the batteries when not in use or when being stored.

Warning