BRAND X3-M Car Wireless Charger User Manual

BRAND X3-M Car Wireless Charger

Product Information

Specifications

• Brand: BRAND
• Type: Automatic wireless car mount
• Product Name: X3-M
• Operating Frequency: 110K-205KHZ
• Recommend Charging Distance: 6mm
• Input: 5V/2A, 9V/2A, 12V/2A (QC3.0/PD/AFC)
• Output Power: 5W/7.5W/10W/15W (MAX)
• Applicable Mobile Phone: 4.0-6.9 inches
• Product Size: 97.5 62 20.5mm
• Net Weight: 137g

Product Description
The BRAND X3-M is an automatic wireless car mount that allows for convenient charging of compatible mobile phones while driving. It features a secure clamp design and is suitable for most automobile air outlets.

Product Details

• This product has a built-in capacitor, allowing the clamp arm to open twice even after the car is powered off within 5 minutes.
• The clamp arms and bottom support have a three-axis linkage automatic clamp design.
• The anti-slip silicone pad has a partial slit design to ensure the keys of the mobile phone are not blocked.
• The product has a circular cooling hole to prevent overheating during charging.

Packing List

1. Car wireless charging stand x 1
2. USB cable x 1
3. Air outlet clip x 1
4. User Manual x 1

Product Usage Instructions

Installation

1. Adjust the clip by pressing the left and right arm clamps.
2. Swivel the clip fitting to the desired position.
3. Adjust the position of the support part and the rotatory vent-mount according to the position of car outlets.
4. Install the machine to the car outlet.
5. Select the locking switch gear according to the thickness of the blades.
6. Note : This product is not suitable for round vents.

Charging

• Ensure that your mobile phone is compatible with wireless charging and within the recommended size range (4.0-6.9 inches).
• Connect the Type-C charging port of the car mount to a power source using the provided USB cable.
• The indicator light will turn on when the car mount is powered on and in standby mode.
• Place your compatible mobile phone on the wireless charging coil area of the car mount.
• The indicator light will start breathing to indicate that charging has started.
• The indicator light will flash for 5 seconds and then turn off when the mobile phone is fully charged.

Safety Precautions

• Do not use the car mount while driving to avoid distractions.
• Ensure that the car mount is securely installed and does not obstruct the driver’s view.
• Do not disassemble or modify the car mount.
• Keep the car mount away from water and other liquids.
• Do not use the car mount with incompatible mobile phones.

Frequently Asked Questions (FAQ)

Can I use the car mount with any mobile phone?
The car mount is compatible with mobile phones that support wireless charging and have a size between 4.0 and 6.9 inches.

Can I charge my mobile phone with a protective case on?
The car mount can charge mobile phones with most protective cases. However, very thick or metal cases may interfere with wireless charging. It is recommended to remove such cases for optimal charging performance.

How do I clean the car mount?
Use a soft, dry cloth to clean the car mount. Do not use any liquid or cleaning agents as they may damage the product.

Can I use the car mount in all types of vehicles?
The car mount is suitable for most automobile air outlets. However, it may not be compatible with round vents. Ensure that your vehicle has compatible air outlets before installation.

How do I adjust the position of the support part and the rotatory vent- mount?
The support part and rotatory vent-mount can be adjusted by loosening the nut and rotating them to the desired position. Tighten the nut to secure the adjustment.

Product introduction

1. Left arm clamp
2. Right arm clamp
3. Bottom bracket
4. Wireless charging coil/indicator
5. Wireless charging coil area
6. Button
7. Type-C charging port
8. Nut

Product parameters

• Product name: X3-M 4. User Manual *1
• Operating frequency: 110K-205KHZ
• Recommend Charging distance: ≤ 6mm
• Input: 5V/2A, 9V/2A, 12V/2A (QC3.0/PD/AFC)
• Output power: 5W/7.5W/10W/15W (MAX)
• Applicable mobile phone: 4.0-6.9 inches
• Product size: 97.5 62 20.5mm
• Net weight: 137g

Lighting mode

Over temperature

protection status

| Indicator light off

Instructions for use

1. The product and the accessories are assembled and tightened by the ball head nut (compatible with other ball heads with a diameter of 17mm), and fixed in the suitable position of the car. Connect the product with a QC3.0 car charger or ≥PD18W car charger (optional) by cable, and insert it into a cigarette lighter.
2. After power on, the indicator light is always on, and it can automatically detect whether there is a mobile phone on the product:
3. When there’s a phone on it, the clamping arms hold the phone in a constant state.
4. Without a phone on it, the product will automatically open its arms and bottom support within 5 seconds to wait for the phone to be put upon it. When the mobile phone is placed on the product, the bottom support holds the mobile phone, and the wireless charging coil will sense the metal parts of the mobile phone through the FOD, depending on the size of the phone, the bottom holder and the clamp-arms move simultaneously to the center of the coil, to automatically clamp the phone and charge it (if the phone has a wireless charging function), because the ratio of length to width of the phone is basically the same, so the positions of the charging coil and the receiving coil are automatically aligned relative to each other. The charging efficiency can be ensured without adjusting the base support manually.
5. If the phone does not support wireless charging, the indicator will flash and turn off for 5s (there may be part of the mobile phone without wireless charging function can not be detected by this product, the need to press the button to clamp the mobile phone.
6. In order to ensure the efficiency and stability of charging, the best wireless charging distance is ≤4mm and can not penetrate the metal, so need to avoid using metal or too thick mobile phone case, this allows the phone to charge quickly and wirelessly . (Charging distance ≥4mm is inefficient and ≥6mm may not charge)
7. The Way to remove the phone: Click any button on the left or right, clamp-arms and bottom support are open to the maximum, waiting to take out the phone, if the phone is not taken out within 5 seconds, the product will automatically clamp the phone again.
8. If the product does not turn on the light or flicker, the button and wireless charging do not work, clamp arms do not open or close, please stop using it and return to the seller to solve the problem.

Product Description

• Wireless charging for devices that meet Qi wireless charging standards.
• Wireless charger supports 15W fast charging, Universal Apple and Android models.
• Wireless charging detective: when the mobile phone with wireless charging function placed onto the machine and be sensed, it will open the left and right arm to automatically clamp the mobile phone, and start wireless charging.
• Foreign object detective: when a phone without a wireless charging function is placed onto the machine and be sensed, the machine opens the clamp arms and also automatically clamp the phone, it is used as a normal phone stand without charging.
• Fixed in the car air outlet, 360°adjustable, you can adjust the direction of your phone at will.
• Circuit protection function: over-current protection, overheat protection, short circuit protection
• Certification: FCC, CE, ROHS

Air vent mount

Adjust the position of the support part and the Rotatory vent-mount according to the position of car outlets, install the machine to the car outlet, select the locking switch gear according to the thickness of the blades; Suitable for most automobile air outlets. The silicon rubber of the clamp mouth contacts the air outlet, more tightly fits, and better protects the outlet not to being scratched.

Product details

1. This product has a built-in capacitor that, after powering off within 5 minutes can still open the clamp arm twice, to prevent it from opening the clamp-arms after the car stalling.
2. This product uses the clamp-arms and the bottom support_three-ax- is linkage automatic clamp design.
3. The anti-slip silicone pad is designed with a Partial slit design, which will not block the keys of the mobile phone.
4. This product has a circular cooling hole, to protect mobile phone charging does not heat.

MADE IN CHINA

FCC statement

This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Note : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmfulinterference to radio communications. However, there is no guarantee that interference will not occur in particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Radiation Exposure Statement
The FCC certification of this device refers to RF exposure testing performed in typical operating conditions, where a person is no closer than 20 centimeters from the device surface at all times, except for non-repetitive patterns with transient time intervals in the order of a second. Only in the stated conditions, the device is shown to fully comply with the FCC RF Exposure requirements of KDB 447498.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>