BRAND STAND CubieVia2.0 Qi Wireless Charger User Manual
- June 1, 2024
- BRAND STAND
Table of Contents
User Manual
Product Introduction
Thank you for purchasing the Brandstand CubieVia” 2.0. This product allows the
hotel to offer guest wireless charging, more power outlets, USB-C charging to
their quests at the desk level. Please be sure to read this User Manual
carefully to ensure proper installation. CubieVia’s elegant design is
applicable for phones and devices in line with Wireless Power Consortium, Qi
standards. Enjoy the cable-free, safe power charging experience.
The information in this document is subject to change and dees not represent a
commitment on the part of Brandstand. No part of this document may be
reproduced, transmitted in any form or by any means electronic or mechanical,
including photecopying, recording or information storage and retrieval
systems, or translated into any language for any purpose other than the
purchaser’s personal use, without the written permission of Brandstand.
Product Features
Tabletop Charger with AC power outlets
Convenient cable-free Qi wireless charging
User friendly connections for USB-C powered devices
Slim, stylish design
Complete surge protection through all AC outlets and/or USB Ports
Product Description
- Qi certified wireless charger up to 10W
- Tamper Resistant 125V AC outlets
- 2 USB-C ports
- Surge Protection
- 6ft 14AWG Power Cord with Right Angle Pass Through Plug
- Security C-Clamp with 2 Wood Screws
Technical Specifications
Continuous Duty Electrical Rating
125VAC 12A50/60Hz 1500W
Maximum Energy Dissipation
555J L-N185J L-G185J N-G 185J
Maximum Spike Current
L-N 3000A L-G 3000A N-G 3000A
UL Clamping Voltage (3-line)
VPR L-N 1500V, L-G 1500V, N-G 1500V
AC Outlets Output
125V 12A
Powered USB Output
20W Dual USB-C
Type-C1: 5V/3A, 9V/2.22A
Type-C2: 5V/3A, 9V/2.22A
Total: C1+C2=20W
Wireless Charging Output
Up to 10W
Wireless Charging
Charging distance: <5mm
Charging efficiency: = 72%
EMI/RFI Filtration
150kHz-1000MHz up to 40db
Surge Response Time (ns)
<20 ns
Working Temperature
0° to +25° C
Power Cord
6ft 14AWG 3-line
Housing Material
UL94V-0
Working Surroundings
Indoor Fixed Mount
Important Safeguards
-
CAUTION: Do not install this device if there is not at least 10 meters (30feet) or more of wire between the electrical outlet and the electrical service panel.
Ensure the unit is plugged into an AC 120V-60Hz outlet. The use of incorrect outlets could cause the unit to malfunction or catch fire. -
To reduce the risk of fire or electrical shock, do not use this device with a receptacle in which the slot openings do not align with the blades.
-
Do not allow children to operate the unit without adult supervision.
-
Always ensure the product is unplugged from the electrical outlet before relocating or cleaning it.
-
Keep the power cord and product away from heated surfaces.
-
The unit should not be exposed to dripping or splashing and no objects filled with liquids, such as vases should be placed on or around the product. It should not be used with aquariums or other water-related products.
-
Do not place or drop product into water or other liquids. tf product falls into water, immediately unplug it from the electrical outlet.
-
Do not put any stress on the power cord where it connects to the product as the power cord could fray and break.
-
Do not plug/unplug the product into/from the electrical outlet with a wet hand.
-
Do not operate the product if it has a damaged or cut power cord or adapter, if wires are exposed, if it malfunctions, if it is dropped or damaged, or if it is dropped in or exposed to water.
-
Place unit where there is good air circulation.
-
The product has no user-serviceable parts. Do not attempt to examine or repair this product yourself. Only qualified service personnel should perform the servicing.
-
No open flames sources, such as candles should be placed on the product.
-
Product should only be used indoors and in dry locations.
Limited 1 Year Warranty
Products are warranted by Brandstand against manufacturing defect in material
and workmanship under normal use for one year from the date of purchase.
Defective products will be exchanged for the same or comparable item.
Return Policy
For a refund or exchange, products must be returned within 30 days of original
purchase date.
Customers must contact Brandstand to obtain a Return Merchandise Authorization
(RMA) number and specific shipping instructions prior to returning the
product. Any product returned without a RMA will be refused. Product must be
in original box with original accessories and packaging undamaged, clean and
brand-new condition. Products that are incomplete, damaged or have been used
will require a deduction in refund. There is a 30% restocking fee on all
returned products. Refunds will be issued by check. Refund checks are mailed
the 10th day from the date the product is returned. Delivery charges and
customized products are non-returnable.
Disclaimer of Damages
In no event shall Brandstand Products, or its suppliers, be liable for indirect, incidental, or consequential damages, loss of profit, loss of use or data, or interruption of business, whether the alleged damages are labeled in tort, contract, or indemnity, even if Brandstand Products or its suppliers has been advised of the possibility of such damages. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation may not apply.
Important:
This product’s USB outlets cannot be used as a USB hub and does not transmit data. The powered USB outlets on this unit are intended solely for charging devices that can be charged via a USB interface.
Unpacking and Set up:
-
Carefully remove from packaging. Verify that you have all necessary components before you dispose of box and packaging.
Component List:
● CubieVia Main Unit
● Security C-Clamp
● 2 Wood Screws -
Place in desired location.
Note: This product is designed to be used on a level, stable, flat surface such as a table, desk, shelf or stand, convenient to an AC outlet, out of direct sunlight and awat from sources of excess heat, dust, moisture or vibration. -
Plug directly into wall AC outlet. Do not plug into another surge protector or extension cord.
-
Secure cord with Security C-Clamp to back of nightstand or desk. Wood screws are included.
CubieVia- Top/Front View
CubieVia- Back View
Qi Wireless Charging:
- Place Qi enabled device on CubieVia. When the power connection has been made, the triangular light pipe willl be illuminated for 10 seconds. This indicates your device is wirelessly charging.
- FOD – Foreign Object Detection is the ability of the transmitter to detect a stray metal object in the wireless charging field. If a metallic object is placed on the charging pad, the triangular light pipewill flash red. Remove the metal object immediately.
CubieVia complies with the WPC
(Wireless Power Consortium) Qi Standard
Surge Protection Light
- Whaen unit is powered, and surge protection is working normally , the green light will be illuminated. If surge protection is not working, the green light will not be illuminated.
Applicable Devices
- Devices with built-in wireless charging receiver module (Samsung S8, iPhone 8/8 Pius, iPhone X and newer etc.).
- Wireless charging case with receiver module (iPhone5, iPhone 6/6 Pius, etc.).
Note: Receivers placed on CubieVia must meet WPC standard.
The Brandstand Difference
Surge Protection
Liquid Spill Testing
For enhanced satety, the Cubie Product Line was designed for and
successfully passed a UL spill test conducted by our ETL testing lab.
Pass-Through Power
The pass-through power plug allows another device (i.e. lamp or alarm clock}
to be plugged into the same wall outlet used by the Cubie Product.
Brandstand
1219 Digital Or. Suite 100
Richardson, TX 75081, USA
877-843-3681
www.brandstand.com
© 2023 TXS Industrial Design Inc. d.b.a. Brandstand Producis
CubieVia and Brandstand are registered trademarks of TXS Industrial Design.
Inc. in the United States.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>