TenHutt WA3551 20V 3000mAh Replacement Battery User Manual
- June 15, 2024
- TenHutt
Table of Contents
TenHutt WA3551 20V 3000mAh Replacement Battery
Specifications
- Manufacturer: [Manufacturer Name]
- Model: [Model Name]
- Voltage: [Voltage]
- Battery Type: [Battery Type]
- Charger Model: [Charger Model]
- Temperature Range for Charging: 5°C – 40°C
Product Usage Instructions
Battery Tool Use and Care
- Recharge only with the charger specified by the manufacturer. Using a charger not intended for the battery pack may cause a fire hazard.
- Use power tools only with specifically designated battery packs. Using other battery packs may result in injury or fire.
- When the battery pack is not in use, keep it away from metal objects such as paper clips, coins, keys, mails screws, or other small metal objects that can create a connection between terminals. Shorting the battery terminals together can cause burns or a fire.
- If liquid is ejected from the battery under abusive conditions, avoid contact. If contact accidentally occurs, flush with water. If liquid contacts the eyes, seek medical help. The liquid ejected from the battery may cause irritation or burns.
Safety Rules for Battery Pack
- Ensure the on/off switch is in the off position before inserting the battery pack to avoid unintentional switching on. Carrying the power tool with your finger on the on/off switch or inserting the battery pack into tools with the switch on can lead to accidents.
- Do not open the battery as it may cause a short-circuit.
- Protect the battery against heat, continuous sun irradiation, and fire to avoid the risk of explosion.
- In case of damage or improper use of the battery, vapors may be emitted. Provide fresh air and seek medical help if necessary.
- When the battery is defective, check any concerned parts for contact with liquid. Clean or replace such parts if required.
- Use the battery only in conjunction with your power tool to protect against dangerous overload.
- Only use the designated charger to charge the battery. Using other types of chargers may result in a fire hazard.
- Do not crush, drop, or damage the battery pack. A damaged battery is subject to explosion. Dispose of a dropped or damaged battery immediately.
- Do not charge a battery tool in a damp or wet location to reduce the risk of electric shock.
Warning: Use only batteries with the voltage listed on the nameplate of
your power tool. Using other batteries can lead to injuries and pose a fire
hazard.
Note: The use of batteries not suitable for the machine can lead to
malfunctions or cause damage to the power tool.
Battery Charging
- Please perform indoor charging. Use only the battery chargers listed on the accessories page. These chargers are specifically matched to the battery of your power tool. The battery is supplied partially charged. To ensure full capacity, completely charge the battery in the battery charger before using your power tool for the first time.
- WARNING: Do not continue to press the on/off switch if the machine has been automatically switched off. Continuing to press the switch can damage the battery.
- To remove the battery, press the battery release button and pull it out downwards. Do not exert any force. The battery should only be charged within a temperature range between 5°C and 40°C for optimal service life. Please observe the notes for disposal.
FAQ
-
Q: Can I use a different charger to charge the battery pack?
A: No, it is important to only use the charger specified by the manufacturer. Using a different charger may result in a fire hazard. -
Q: Can I open the battery to replace cells?
A: No, opening the battery can cause a short-circuit. It is recommended to contact a qualified service center for battery replacements. -
Q: What should I do if the battery is damaged or emits vapors?
A: If the battery is damaged or emits vapors, provide fresh air and seek medical help if necessary. Dispose of a damaged battery immediately.
Power Tool Battery User Manual
Battery tool use and care
-
Recharge only with the charger specified by the manufacturer. A charger that is suitable for one type of battery pack may create a risk of fire when used with
another battery pack. -
Use power tools only with specifically designated battery packs. Use of any other battery packs may create a risk of injury and fire.
-
When battery pack is not in use, keep it away from other metal objects, like paper clips, coins, keys, mails screws or other small metal objects that can make a
connection from one terminal to another. Shorting the battery terminals together may cause burns or a fire. -
Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact accidentally occurs, flush with water. If liquid contacts eyes, additionally
seek medical help. Liquid ejected from the battery may cause irritation or burns.
Safety rules for battery pack
-
Avoid unintentional switching on, ensure the on/off switch is in the off position before inserting battery pack. Carrying the power tool with your finger on
the on/off switch or inserting the battery pack into the power tools that have the switch on invites accidents. -
Do not open the battery. Danger of short-circuiting.
-
Protect the battery against heat, e.g., also against continuous sun irradiation and fire. There is danger of explosion.
-
In case of damage and improper use of the battery, vapors may be emitted. Provide for the fresh air and seek medical help in case of complaints.
-
When the battery is defective, liquid can escape and come into contact with adjacent components Check any parts concerned. Clean such parts or replace them, if required.
-
Use the battery only in conjunction with your power tool. This measure alone protects the battery against dangerous overload.
-
Only use charge the battery with the charger No. together. use with other type of charger may result in a fire.
-
Do not crush, drop or damage the battery pack. Do not use a battery pack or charger that has been dropped or received a sharp blow. A damaged battery is subject to explosion. Properly dispose of a dropped or damaged battery immediately.
-
Do not charge a battery tool in a damp or wet location. Following this rule will reduce the risk of electric shock.
Warning: use only batteries with the voltage listed on the nameplate of your power tool. Using other batteries can lead to injuries and pose a fire hazard.
Note: use of batteries not suitable for the machine can lead to malfunctions of or cause damage to the power tool. Battery charging Please indoor charging.
- Use only the battery chargers listed on the accessories page. Only these battery chargers are matched to the battery of your power tool.
- The battery is supplied partially charged. To ensure full capacity of the battery, completely charge the battery in the battery charger before using your power tool for
the first time.
WARNING: Do not continue to press the on/off switch the machine has been automatically switched off .The battery can be damaged.
- To remove the battery, press the battery release button and pull out the battery downwards. Do not exert any force.
- The battery should be charged only within a temperature range between 5℃ and 40℃ . A long battery service life is achieved in this manner.
- Observe the notes for disposal.