SUBCOLD 35 35 Litre Glass Door Fridge Instruction Manual

SUBCOLD 35 35 Litre Glass Door Fridge

Thanks for purchasing our product and thank you for placing your confidence in us. Please read this manual carefully before using. Follow the instructions and keep this handy for future reference. Please follow the operating instructions and safety notices in the manual. If any issues arise, do not fix it yourself or hand it to the after-sales service center which has not been authorized. Please contact the local authorized service center.

DESCRIPTION OF THE PARTS

1. Blank Plate for Hinge
2. Evaporator
3. Large Shelf
4. Small Shelf
5. Hinge Cover
6. Light Switch
7. Door Seal
8. Door Handle

Wiring Diagram

SPECIFICATIONS AND PARAMETERS

SAFETY WARNING

To avoid the risk of fire, electrical shock or injury and ensure your personal safety when using this appliance the underlisted instructions/precautions are to be followed:

1. The circuitry for the refrigerator must be isolated. The area of cross section of wire must be larger than 0.75mm.
2. The power plug should have its own socket, the socket must be grounded as adapter may cause the socket to overheat.
3. The voltage and frequency of this product should be 220-240V;50Hz. Contact with the local maintenance station or retailer in case of electrical cord damage.
4. Always disconnect the power only by pulling the power plug out of the socket directly but not by the cord.
5. Do not damage the refrigerant circuit.
6. Persons with low physical, sensory and mental capabilities (including children of below 8 years) are not advised to use this appliance unless they are well supervised/instructed by a safety person. Children should be supervised to ensure that they do not play with the appliance. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
7. Keep ventilation opening, in the appliance enclosure or in the built in structure should be clear of obstruction.
8. Before you throw away your old refrigerator or freezer.
   • Take off the doors;
   • Leave the shelves in place so that children may not easily climb inside
9. Do not store in the appliance explosive devices/substances such as aerosol cans with a flammable propellant. This appliance is intended to be used in household and similar applications such as :
   • Staff kitchen areas in shops, offices and other working environments;
   • Farm houses and by clients in hotels, motels and other residential type environments; bed and breakfast type environments;
   • Catering and similar non-retail applications.
10. Do not use electrical appliances inside the food storage compartments of the appliance, unless they are of the type recommended by the manufacturer.
11.  All affected or faulty parts (including the lamp) must be changed be a certified technician
12. To avoid hazards, the supply cord must always be replaced by the manufacturer, its service agent or similarly certified/qualified persons when damaged.

Warning: this appliance must be fixed in accordance to the instructions provided to avoid a hazard

NOTE

1. Do not expose to open flames, gas or other harmful substances
2. Don’t splash water on the rear of the appliance, for it may cause malfunction or 2. electric shock.
3. Don’t store inflammable materials such as ether, benzene, LP gas etc
4. It is better not place objects on top of the appliance which is magnetic, heavy, or filled with water.
5. The refrigerant of this product is R600a, which is inflammable. So, make sure not to damage the cooling system during the transportation and installation.
6. DISPOSAL: For safe disposal contact a WEEE waste removal company local to your area

INSTALLATION INSTRUCTIONS

1. The refrigerator should be located on a completely flat surface, Leave 5~10 cm between each side of the appliance and the wall, and leave 30 cm between the top of the appliance.
2. Choose a location that is not exposed to sunlight, high temperature or humidity
3. Remove all adhesive transport tapes before use.
4. The appliance can be adjusted by turning its two legs in front the bottom when it is unstable. Turning clockwise can raise up the machine.
5. The location should be firm and flat. If it is not in a level position it may cause noise/vibration:
6. The noise may be increased if the floor is not firm and level
7. Put a sheet under the appliance for better heat emission if you need to locate it onto a carpet.
8. Make sure the adjustable legs are tight to the floor and set the appliance slope backward slightly for keeping the doors closed tightly.

For disposal of the appliance:
To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. And the disposal should only be done through public collection points.

For installation, and servicing:
The appliance should be placed on a horizontal floor and allow free ventilation.

For handling:
Always handle the appliance gently and with care to avoid any damage.

USAGE INSTRUCTIONS

Placement of Items

1. Allow some space between items inside for air circulation.
2. Food should be kept in sealed package to prevent them from getting dry
3. Hot food should be cooled down before placing into the appliance.
4. Reduce the frequency of door opening – it can efficiently lower the electricity consumption.

Warning Do not use any electronic equipment inside the appliance.

OPERATION

Setting the Temperature Control

The temperature of refrigerator can be controlled manually by the knob. The higher the number on the thermostat the colder the inside temperature will be.

• Your unit has only one control knob for regulating the temperature in the compartment. The temperature control knob can be found at the lower right side of the compartment.
• Set the temperature knob to 5 for first use, the Temperature can be adjusted to suit your need after 24hrs. “3” and “4”is recommended for home or office use.
• Turn the switch to “0” to turn the appliance off

NOTE:

• urning the switch to “0” only stops the cooling cycle and not the shutting off the unit’s power.
• When the unit is not plugged or turned off, wait for 3 to 5 minutes before restarting to avoid the unit’s malfunctioning
• Temperature range for your reference: 3~18°C

Energy Saving

1. Place this product in a cool area of the room and far away from any heat source for maximum function.
2. Do not store hot food in the refrigerator, wait for it to cool before storage. This will prevent the compressor from overworking
3. Ensure foods and other items placed in the refrigerator is wrapped properly or with a dry container to prevent frost build-up inside the unit
4. Do not line the interior with aluminum foil, wax paper etc.
5. Well, organization and proper food labeling should be taken into consideration to reduce frequent door openings to improve the efficiency of the appliance.

Packing and Moving

1. Ensure you note the position of each accessory of the appliance when you unpack it, repack the product and check it carefully before transportation.
2. Do not lift or pull the door or the door handle during lifting, carrying and transportation.
3. When moving, the appliance can not be sloped over 45 degrees (the angle to the vertical direction). Please avoid strong vibrations.

MAINTENANCE

This appliance should be maintained and cleaned frequently. For your safety, ensure to unplug the socket from the main power source before cleaning.

Interior maintenance
Clean the interior of the appliance with clean water and non-haz cleaner and wipe it with dry with a cloth.

Maintenance of the door gasket
It is easy to cause damage if the door gaskets if not cleaned well. Ensure the gasket is cleaned sufficiently.

Outer maintenance
Wipe the dust off with a dry clean cloth.

Defrost
Heavy frost will influence the refrigeration of the appliance and increase the energy consumption. Thus, defrosting is needed when the frost is as thick as 5 mm. The process for manual defrost are listed as follows:

• Take all the food out of the compartment;
• Remove the shelves;
• Unplug the power cord;
• Open the doors and wait for thawing;
• Wipe the defrost water with a dry cloth.

Warning: Do not use any other equipment or method to assist the defrost process. It may cause damage to the cooling system.

Disconnecting the Appliance

In case of a power failure, the refrigerator can store food normally for several hours.

During power failure
If there is a power failure, do not put new items in the refrigerator and minimize the frequency of door opening.

During vacation
For a short vacation, ensure that all items in the fridge are removed before the vacation and close the door firmly. if on a long vacation, the appliance can be disconnected from the power source; defrot, clean and wipe-it dry, and leave its door open.

Not in use

If the refrigerator will not be used for a long time, please unplug it from the outlet and clean the appliance. The door should be kept open in order to prevent unpleasant smells

Attention: In a general working conditions, do not restart the power immediately, please leave at at least 5 minutes before powering back on.

USER NOTIFICATIONS

• Do not expose water to the refrigerator, as it will lead to oxidation which may cause malfunction or damage.
• Cleaning materials such as soap powder, abrasive cleaning powder, alkali cleansers, chemicals, thinners, alcohol, acid petroleum and very hot water should not be used to clean the refrigerator as they may damage the painted covers and plastics.
• Heat or direct sunlight can cause damage to the interior plastic components and liner..
• Ensure to check the following after maintenance:
  • Is there any damage or loss of power?
  • Can the plug be put in the socket reliably and smoothly?
  • Is the plug heating unconventionally?

Troubleshooting Tips

You can easily solve some common problems in the unit which will save you the cost for a possible service charge by technician. Try the suggested points below to see if you can solve the problem before contacting the repair center.

Cases that are not malfunction

• Moisture may form dew on the outside of the product during high humidity. Please wipe the external surface with a clean and dry cloth to clear this dew
• The flow of refrigerant through the pipeline coil can cause some noises which is normal.
• The sides of product have a warm temperature; it is as a result of the appliance working.
• The frame of the appliance will be warm to prevent condensation

If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or a qualified technician in order to avoid hazard.

Ecodesign Tips

Super 35

• It is intended to be used exclusively for the storage of beverages.
• This refrigerating appliance is not suitable for freezing operation.
• The wine cooler is recommended to be operated at + 12°C .
• The following arrangement of shelves is recommended for energy consumption to be used as efficiently as possible.

THERE ARE TWO SHELVES INTOTAL

• When the ambient temperature is 25°C. and the product has no bottles loaded, it will take around 30 minutes to decrease the refrigerator’s temperature from 25°C to 17°C.
• The beverage cooler is recommended to be operated as designed at 17°C. If the setting temperature is higher than 17°C, the energy consumption will be lower. If the setting temperature is lower than 17°C, the energy consumption will be higher.
• The above information is in accordance with EU and UK ecodesign and energy labeling regulations

Ecodesign Tips

Super 85

• It is intended to be used exclusively for the storage of beverages.
• This refrigerating appliance is not suitable for freezing operations.
• The fridge is recommended to be operated at + 12°C.
• The following arrangement of shelves is recommended for energy consumption to be used as efficiently as possible.

THERE ARE FOUR SHELVES IN TOTAL

• When the ambient temperature is 25°C. and the product has no bottles loaded, it will take around 30 minutes to decrease the refrigerator’s temperature from 25°C to 17°C.
• The beverage cooler is recommended to be operated as designed at 17°C. If the set temperature is higher than 17°C, the energy consumption will be lower. If the set temperature is lower than 17°C, the energy consumption will be higher.
• The above information is in accordance with EU and UK ecodesign and energy labeling regulations

Ecodesign Tips

Super 115

• It is intended to be used exclusively for the storage of beverages.
• This refrigerating appliance is not suitable for freezing operations.
• The fridge is recommended to be operated at + 12°C.
• The following arrangement of shelves is recommended for energy consumption to be used as efficiently as possible.

THERE ARE FOUR SHELVES IN TOTAL

• When the ambient temperature is 25°C. and the product has no bottles loaded, it will take around 30 minutes to decrease the refrigerator’s temperature from 25°C to 17°C.
• The beverage cooler is recommended to be operated as designed at 17°C. If the set temperature is higher than 17°C, the energy consumption will be lower. If the set temperature is lower than 17°C, the energy consumption will be higher.
• The above information is in accordance with EU and UK ecodesign and energy labeling regulations

For FAQs and more information, please visit:

• www.subcold.com
• 01506415564 (UK Office Hours)
• @subcoldltd
• @subcold_official
• sales@subcold.com

Subcold Ltd
1 Drummond Square Brucefield Industrial Estate Livingston, West Lothian EH54 9DH the United Kingdom

Eurolink Europe Compliance Limited 25 Herbert Place Dublin D02 AY86 Republic of Ireland

References

• Mini Fridges - Beer Fridges – Wine Coolers - Mini Freezers | Subcold – Subcold Ltd

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>