CORSAIR HS65 Gaming Headset with Bluetooth User Manual

CORSAIR HS65 Gaming Headset with Bluetooth

PACKAGE CONTENTS

• A HS65 WIRELESS HEADSET
• B WIRELESS USB RECEIVER
• C USB CHARGING CABLE

APPEARANCE OF THE SWITCH SET

• A MICROPHONE TURN BUTTON
• B GEONESS ADJUSTMENT/SOUNDBITE CORRECTION SELECTION
• C READING SOCKET
• D MULTIFUNCTIONAL BLUETOOTH BUTTON (MFB)
• E WSKA2NlK STATUS LED
• F POWER BUTTON
• G INSKA2NlK PAIRING STATUS LED (WIRELESS USB RECEIVER)

RF WIRELESS CONNECTION MODE

• PC – Connect the wireless USB receiver to any USB port (Type A) on your computer. Press the button to power on the headset. By default, the headset turns on in wireless mode radio frequency (RF). The headset works up to 50 feet from the receiver, but other devices wireless and electronic devices and obstacles such as walls may interfere with communication.
  • Note: When you first connect your CORSAIR HS65 WIRELESS headset to your computer, the operating system will automatically install the device driver. After installing the driver, we recommend reinstalling start the computer before using the device.
• PlayStation – Connect the wireless USB receiver to any USB (Type-A) port on your PS5 or console PS4. In the PlayStation UI, set “Headphone Output” to “All On” and set
• VOLUME ADJUSTMENTS (Headphones) at the maximum level. Then adjust the gioSnoéé using the controller volume on the headset.

iCUE

• Go to corsair.com/support/downloads. to download the CORSAIR iClJE software. Software iCUE enables you to use the full range of features of the HS65 WIRELESS headset.
• To use the iCUE software, connect the wireless USB receiver to your computer.

Note: If the headset will be used without software, some functions that may not be available will be disabled.

• Install iClJE software on your Windows 10 or later computer or with macOS.
• Once the installation is complete, restart your computer and then boot up the iCUE software.

iCUE UM02LlWlA SOFTWARE:

• Select and adjust diage graphic equalizer (EQ) settings
• Turn Dolby Audio 7.1 surround sound on and off.
• Enable SoundlDTM divview personalization Requires a wireless USB receiver.

(Not available with Bluetooth)

• How to use the functions of the HS65 WIRELESS headset is described in more detail in the built-in software documentation.

BLUETOOTH MODE

• When the headset is paired, press and hold the MFB button until the LED status flashes red and blue.
• Once the headset is paired, the status LED will be on flashing blue. Press the power button quickly to switch wireless RF modes (RF) and Bluetooth.
• When the headset is in wireless radio (RF) mode, the indicator Status LED flashes red, orange, or green depending on the current charge level battery.
• When the headset is in RF wireless mode and paired with a mobile phone via Bluetooth, only accepts and receives phone calls.
• Press quickly power button to enter Bluetooth mode and enable both phone calls and audio Bluetooth (for example to listen to music).
• By default, the headset connects to SIP mode the last time it was turned off.

RECEIVING AND ENDING PHONE CALLS

• To answer an incoming call, press the MFB button once.
• To end the connection, press again MFB button once.

LISTENING TO MUSIC (PLAYING MEDIA)

To play the song, press the MFB button again. To pause playback, press the button again MFB.
To skip to the next track, press the MFB button twice quickly. To go to the previous song, press the MFB button three times quickly.

OPTIMIZATION OF WIRELESS CONNECTIONS

• Place the USB wireless receiver in an open space free from obstructions.
• Before first use, check that the battery is fully charged.
• Do not leave the battery completely discharged for long periods. Battery lifespan can be maximized by keeping it partially charged.
• The headset should be stored at room temperature (20-300C)
  • NOTE: Listening to loud music for long periods may negatively affect your hearing. Take breaks in between sessions and always start with a low level of flexibility.

MICROPHONE ADJUSTMENT

• Lifting it up turns the microphone off. Lowering turns the microphone back on.
• You can also use the power button on the headset to turn the 02 on and off. Hold the mute button to turn on/off the microphone in the headphones.
• Bend the flexible microphone boom to fit it as best as possible against the left corner of your mouth for results best results.
• A good starting point is a 30-degree angle, but you can change it if you feel will be recorded Too loud or quiet.

VOLUME ADJUSTMENT

• To adjust the volume, use the volume/EQ knob.
• In addition, press the knob volume control switches four divvied correction settings: standard, gain bass, cinema, and tournament FPS.

LANDING

Before using the CORSAIR HS65 WIRELESS wireless headset for the first time, you must fully absorbed.

• Connect the USB charging cable to any working USB port on your computer.
• Connect the USB charging cable to the CORSAIR HS65 WIRELESS headset.
• The battery of the CORSAIR HS65 WIRELESS wireless headset does not have a “memory effect”, therefore, it does not need to be completely discharged before recharging.
• USB cable for {charging requires a high-power port (USB 2.0 or later). Some USB ports on older devices do not support the USB 2.0 standard.

LED INDICATOR

BATTERY STATUS LED INDICATOR (ON HEADSET)

• SHORT
  • RED
• MEDIOCRE
  • ORANGE
• TALL
  • GREEN

The status LED flashes while charging and turns green when the battery is fully charged. continuous light. When the headset is not charging, the status LED flashes to show the charging level. charging as described above.

INDICATOR WIRELESS CONNECTION

INDICATOR WIRELESS CONNECTION STATUS LED (ON WIRELESS USB RECEIVER)

• When the receiver is connected to the headset and is operating normally, the LED indicator lights white continuous light
• If the receiver cannot connect to the headset, the LED indicator flashes red quickly.

INFORMATION ON REMOVING

INFORMATION ON REMOVING THE BATTERY

• This product contains a battery and safety precautions must be followed for the intended use of the product for disposal and recycling.
• To safely remove the battery for recycling, follow these steps: numbered activities shown in the diagrams below.
• CORSAIR MEMORY, Inc. encourages customers to donate used electronic devices and batteries for recycling following local laws and regulations.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>