V-TAC vt-1140 Solar LED Wall Light Instruction Manual
- June 15, 2024
- V TAC
Table of Contents
V-TAC vt-1140 Solar LED Wall Light
Product Information
Specifications
- Model: SKU
- Lumens:
- Solar Panel:
- Battery:
- Charging Time:
- Working Time:
- Sensor Type:
- Sensor Range:
- Bulb Watts:
- Color Temperature:
- Dimension:
- Material:
Introduction & Warranty
This product is a solar LED wall light with a sensor. It is designed to
provide lighting for outdoor areas using solar power.
This product comes with a warranty. For more information, please refer to the
warranty terms and conditions provided by the user manual.
Multi-Language Manual
To access the manual in multiple languages, please scan the QR code provided in the user manual.
Contact Information
If you have any queries or issues with the product, please contact us at support@v-tac.eu. For a wider range of products or inquiries, please reach out to our distributor or nearest dealers. Our contact details are as follows:
V-TAC EUROPE LTD.
Bulgaria, Plovdiv 4000, bul.L.Karavelow 9B
Product Usage Instructions
WARNING:
- Before starting the installation, make sure to turn off the power.
- Installation should be done by a certified electrician.
Installation Diagram:
Refer to the following diagram for the installation process:
- Drill two holes in the wall and insert two plastic expansion bolts.
- Fix the iron bracket on the plastic expansion piece with self-tapping screws.
- Open the lamp and turn on the switch.
- Tighten the lamp and test.
Function of Sensor
- Press the switch to turn on the light.
- The light turns on at 100% brightness when motion is detected.
- The light dims to 10% brightness when people go away.
- To turn off the light, press the switch again.
Maintenance & Warning
Regular maintenance is required to ensure optimal performance of the product. Follow the instructions provided in the user manual for maintenance procedures. Please note that improper maintenance may void the warranty.
FAQ (Frequently Asked Questions)
Q: How long does it take to fully charge the battery?
- A: The charging time of the battery depends on various factors such as sunlight intensity and weather conditions. On average, it takes approximately [charging time] to fully charge the battery.
Q: How long does the light work after a full charge?
- A: The working time of the light depends on the brightness setting and usage. On average, it can work for approximately [working time] after a full charge.
Q: Can I install this light myself?
- A: It is recommended to have the installation done by a certified electrician to ensure proper installation and safety.
Q: What should I do if the light is not functioning properly?
- A: If you encounter any issues with the product, please refer to the troubleshooting section in the user manual. If the problem persists, please contact our customer support at support@v-tac.eu for assistance.
TECHNICAL DATA
- MODEL VT-1140
- SKU 23014
- LUMENS 70 Lm
- SOLAR PANEL DC 5.5V, 0.55W Polycrystalline
- BATTERY 1200mAh, Li-Ion, DC: 3.7V
- CHARGING TIME 8-10 Hours
- WORKING TIME 6-8 Hours
- SENSOR TYPE Microwave Sensor 360°
- SENSOR RANGE 3-4 M
- BULB WATTS 1 W
- COLOR TEMPERATURE 3000K
- DIMENSION 121x90x121.5mm
- MATERIAL Aluminium+PC
INTRODUCTION & WARRANTY
- Thank you for selecting and buying the V-TAC product. V-TAC will serve you the best. Please read these instructions carefully before starting the installation and keep this manual handy for future reference. If you have any other queries, please contact our dealer or local vendor from whom you have purchased the product. They are trained and ready to serve you at your best. The warranty is valid for 3 years from the date of purchase. The warranty does not apply to damage caused by incorrect installation or abnormal wear and tear. The company gives no warranty against damage to any surface due to incorrect removal and installation of the product. The products are suitable for 10-12 Hours Daily operation. Usage of the product for 24 Hours a day would void the warranty.
- This product is warranted for manufacturing defects only.
MULTI-LANGUAGE MANUAL QR CODE
- Please scan the QR code to access the manual in multiple languages.
- In case of any query/issue with the product, please reach out to us at: support@v-tac.eu
- For More products range, inquiry please contact our distributor or nearest dealers.
- V-TAC EUROPE LTD. Bulgaria, Plovdiv 4000, bul.L.Karavelow 9B
WARNING
- Please make sure to turn off the power before starting the installation.
- Installation should be done by certified electrician.
This marking indicates that this product should not be disposed of with other household wastes.
INSTALLATION DIAGRAM
INSTALLATION INSTRUCTION
- Drill two holes on the wall and insert two plastic expansion bolts in it.
- Fix the iron bracket on the plastic expansion piece with self-tapping screws.
- Open the lamp and turn on the switch.
- Tighten the lamp and test
FUNCTION OF SENSOR
- Press the switch(turn on)
- Turns 100% brightness when motion is detected and 10% light when people go away
- Turn off
MAINTENANCE & WARNING
- Do not use solvents, petrol, etc. Otherwise the light will be damaged.
- Clean the light with a dry, lint-free cloth.
- Check the solar panel for dirt regularly. If dirt or is present remove it to guarantee flawless function of the product.
- Especially during the winter, keep the product free from snow and ice.
- Confirm installation direction is correct (solar panel should be at top).
- Confirm no objects blocking the solar panel to receive sunlight.
- Keep away from the fire.
- Don’t immerse in the water.
- support@v-tac.eu
Documents / Resources
|
V-TAC vt-1140 Solar LED Wall
Light
[pdf] Instruction Manual
vt-1140 Solar LED Wall Light, vt-1140, Solar LED Wall Light, LED Wall Light,
Wall Light, Light
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>