GABRIEL SCOTT E503097 Welles Pendant

Specifications

• Product: Welles Pendant 3 by Michelle Gerson
• Manufacturer: Gabriel Scott
• Website: www.gabriel-scott.com

Product Information

The Welles Pendant 3 by Michelle Gerson is a stylish and modern lighting fixture designed to enhance the ambiance of any space. It comes with a number of components and requires proper installation for optimal performance.

Product Usage Instructions

Informations
Before proceeding with the installation, it is important to note the following:

• Please provide email confirmation of receiving the complete order and its components in good condition within 7 days of delivery to ensure product warranties are valid.
• Contact support at +1 212-837-2923 or [email protected] for any assistance.

Box Content
The product box contains the following items:

• Fixture

• 8-32 screws (4x)

• Universal cross bar (1x)
• Canopy (1x)
• LED driver (1x)
• Glass volumes (2x)

Installation Steps
Follow these steps to install the Welles Pendant 3:

• Step 1: Connecting the LED Driver
• 1. Using wire terminals, connect the LED driver to the main power source. Ensure the LED driver is securely placed in a remote location while maintaining access to the output wires.

2. Install the LED driver within 100ft of the fixture. Refer to the driver documentation for more information.

• Step 2: Installing the Universal Cross Bar
• 1. Insert the junction box back into the wall hole.

2. Install the universal cross bar to the wall using appropriate screws.

• Step 3: Connecting the Fixture
  Connect the double sconce fixture to the LED driver.

• Step 4: Installing the Fixture
  Using the provided screws, install the fixture onto the universal cross bar.

• Step 5: Installing the Glass Globes

• 1. Unscrew the retaining ring of each glass globe.

2. Carefully slide the glass globes into place.
3. Screw the retaining ring back firmly.
4. Optional: Orient the glass opening away from the line of sight.  

Congratulations! You have successfully installed your Welles Gerson Pendant 3.

FAQ

Where can I find more information or get support?
For any additional questions or support, please consult our website at www .gabriel-scott.com or contact us via email at [email protected] or phone at 646-783-3770.

Informations

• Certified electrician recommended for electrical installation.
• Minimum 2 people recommended for installation.
• Terminal Block not included. Installation may require advice from a qualified person.
• Junction box rated for minimum of 100lbs or structural blocking required to support fixture.
• Structural blocking required at monopoint locations, adequate drywall plugs may be substituted.
• Far all LED fixtures, use only with class 2 power unit.
• The light source contained in this luminaire shall only be replaced by the manufacturer or his service agent or a similar qualified person. Contact manufacturer for service.
• For controllable luminaires, the classification of insulation that has been maintained between LV supply and control conductors shall be provided: basic insulation, reinforced insulation etc.

Box Content

FIXTURE

ALSO SHIPPED

Instructions

• Step 1

  • Using wire terminals, connect the LED driver to the main power source. Secure the LED driver in remote location by also making sure to keep access to the output wires. Install the driver within 100ft of the fixture. Refer to the driver documentation for more informations.
  • Insert the junction box back in the wall hole. Install the universal cross bar to the wall with appropriate screws.

• Step 2
  Connect the double sconce fixture to the LED driver.

• Step 3
  Using provided screws, install the fixture to the universal cross bar.

• Step 4

  • Install the glass globes by unscrewing the retaining ring and carefully slide the globes in place.
  • Screw the retaining ring back firmly.
  • Optional: Orient the glass opening so that it faces away from the line of sight.

FOR MORE INFO

• For other questions, please consult our website: www.gabriel-scott.com
• [email protected]
• 646-783-3770

References

• Contemporary Lighting & Furniture Designer | Gabriel Scott

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>