Creek C1022 CW Watch S5 User Manual

Creek C1022 CW Watch S5

Specifications

• Digital Crown

• Screen: Touchscreen

• Front: Band, Magnetic Charging Contacts, Heart Rate and Blood
  Oxygen Sensors

• Back: Magnetic Charging Cable

Product Usage Instructions

Wear Your Watch

1. Thread the longer band through the first loop of the shorter band.
2. Adjust to a comfortable tightness, then press the holes on the longer band onto the metal pin buckle of the shorter band.
3. Insert the longer band into the second loop of the shorter band and tighten.

Power On

Press the Digital Crown until the startup screen appears.

Note: If the watch can’t power on, it may be because the battery has drained due to long periods of inactivity. Please charge it for approximately 10 minutes and wait for it to power on automatically.

Set up the Watch

1. Download the Fitbeing app from the app store on your phone and install it.
2. Open the Fitbeing app and select “Set Up a Device” on the home page.
3. Follow the instructions to pair your CW Watch S5 via Bluetooth.
4. You can now start using the watch.

Attention:

1. To prevent connection issues between the app and the watch, please do not pair directly within the Bluetooth device list in your phone’s system settings.
2. To ensure successful pairing, please grant Fitbeing App permissions to access Bluetooth, Location, and Camera on your phone.

Get Started

Touchscreen Operation:

• Swipe up
• Swipe left
• Swipe right
• Swipe down

Digital Crown Operation:

• Press:
  1. Press the digital crown to wake up the screen.
  2. Press the digital crown to enter the app center from the watch face screen.
  3. Exit the app
• Long press for 8 seconds to force restart the watch.
• Rotate:
  1. Toggle between screens or navigate through menus.
  2. Adjust the volume of prompt tones and phone calls.

Common Functions

• Notification Center: Swipe down on the watch face screen.
• Change the Watch Face: Press and hold the screen for 1 second to access the watch face gallery.
• Control Center: Swipe up on the watch face screen. Enable features like Silent Mode, Sleep Mode, and Always-on Display, and adjust brightness and volume swiftly.
• Tiles: Swipe left or right on the watch face screen to switch quickly between Activity, Heart Rate, Sleep, Recently, Weather, or Workout tiles.
• Record Workouts: Access the Workout app and select a specific workout to start recording.
• Health Metrics Measurement: When wearing the watch, it automatically measures health data such as heart rate, sleep, stress, and activity. You can view and track this data in the application.

FAQ

• Q: How do I charge the CW Watch S5?

• A: You can charge the CW Watch S5 using the included magnetic charging cable. Connect the charging cable to the magnetic charging contacts on the back of the watch, and then plug the other end of the cable into a power source.

• Q: How long does it take to fully charge the CW Watch S5?

• A: It takes approximately 10 minutes to charge the watch to power it on. For a full charge, it may take longer depending on the current battery level.

• Q: Can I use the CW Watch S5 for swimming or in water?

• A: The CW Watch S5 is water-resistant, but it is not recommended for swimming or submerging in water. It is only suitable for everyday water exposure, such as washing hands or being caught in
  the rain.

• Q: How do I view my health data in the Fitbeing app?

• A: Open the Fitbeing app on your phone and navigate to the Health section. Here, you can view and track your health data, including heart rate, sleep, stress, and activity information recorded by your CW Watch S5.

OVER VIEW

FRONT

BACK

Charging cable

Steps for Use

You can follow these steps to use CW Watch S5: 1

1. 1 Wear →
2. 2 Power On →
3. 3 Set up →
4. 4 Start Using

Wear Your Watch

• Step 1: Thread the longer band through the first loop of the shorter band.
• Step 2: Adjust to a comfortable tightness, then press the holes on the longer band onto the metal pin buckle of the shorter band.
• Step 3: Insert the longer band into the second loop of the shorter band and tighten.

Power On

Press the Digital Crown until the startup screen appears.

Note : If the watch can’t power on, it may be because the battery has drained due to long periods of inactivity. Please charge it for approximately 10 minutes and wait for it to power on automatically.

Set up the Watch

• Step 1: Download the Fitbeing app
• Go to the app store on your phone, search for Fitbeing, and install it.
• For Android phones, go to the Google Play.
• For iPhone, go to the App Store.

You can also scan the QR code on the left to quickly go to the Fitbeing app in the app store, and install it.

• Step 2: Pair with the App
  Open the Fitbeing app and select “Set Up a Device” on the home page. Follow the instructions to pair your “CW Watch S5” via Bluetooth. Then you can start using the watch. Attention:

Search via Bluetooth

1. To prevent connection issues between the app and the watch, please do not pair directly within the Bluetooth device list in your phone’s system settings.
2. To ensure successful pairing, please grant Fitbeing App permissions to access Bluetooth, Location, and Camera on your phone.

Get Started

Touchscreen Operation
Support full-screen touch (swipe, tap, touch and hold)

Digital Crown Operation Press

1. Press the digital crown to wake up the screen.
2. Press the digital crown to enter the app center from the watch face screen.
3. Exit the app

Long press for 8 seconds to force restarting the watch.

Rotate

1. Toggle between screens or navigate through menus.
2.  Adjust the volume of prompt tones and phone calls.

Common Functions

Notification Center

• Swipe down on the watch face screen.

• Control Center
  To access the Control Center, swipe up on the watch face screen. Enable features like Silent Mode, Sleep Mode, and Always-on Display, and adjust brightness and volume swiftly.

• Tiles
  To switch quickly between the Activity, Heart Rate, Sleep, Recently, Weather, or Workout tiles, swipe left or right on the watch face screen.

• Change the Watch Face
  To change the watch face, press and hold the screen for 1 second to access the watch face gallery.

• Record Workouts
  To start your workout recording, access the Workout app and select a specific workout.To obtain your exercise trajectory and other data when engaging in outdoor activities, you need to connect the Fitbeing App while your smartwatch is in outdoor mode.

• Health Metrics Measurement
  When wearing the watch, it automatically measures health data such as heart rate, sleep, stress, and activity. You can also view and track this data in the application.

Install New Watch Faces

In the Fitbeing app, navigate to the Face Gallery page to pick up your preferred watch face.

Charge the Watch

To charge the watch, connect the charging cable to a USB power source. Attach the other end to the charging contact on the back of the watch. The watch will display a charging icon while it is being charged.

Note

•  Make sure the USB charging plug is at the same side as the crown.
• Ensure to use a standard USB power source with an output of 5V⎓1A or above.
• Prior to charging, ensure to clean the charging contacts of the watch to eliminate any lingering sweat or moisture.

Change the Band Remove the band

1. Lift the spring bar from the groove.
2. Push and hold the spring bar.
3. Pull it out gently to remove the band.

Install band

1. Insert the metal pin at position “A” in the hole.
2. Push and hold the spring bar.
3. Press the band into the body and release the spring bar.
4. Pull the watch band to confirm the firm installation.

Wear and Care

• It is advised to remove the watch for approximately one hour daily. If you experience discomfort or irritation like redness, tingling, or a burning sensation, take off the watch and rest your wrist.
• To maintain hygiene, regularly clean your watch and wrist, particularly after workouts and sweating. Avoid using hand soap, shower gel, dishwashing liquid, or cleaning wipes as they can cause skin irritation. Instead, use mild soap and fresh water to clean the band.

Wear Your Watch

For optimal data accuracy, please observe 1 the following guidelines while wearing the watch:

1.  Wear the watch at a position approximately two finger-widths from your wrist bone.
2.  For comfort, adjust the band to allow a finger’s width between it and your wrist. This ensures both contact and fit

Key Specifications

Design for Comfortable Wearing

The inner sweat grooves of the band are specifically designed to minimize skin irritation resulting from sweat, moisture, and prolonged wear

Precautions

• Do not replace the built-in battery yourself as it may pose a safety risk.
• Avoid forcibly opening the watch case, as it may cause short circuits and overheating.
• Keep the watch away from environments exceeding 60℃ to prevent battery leakage or explosion.
• While the product complies with IP68 waterproof standards, it is not recommended for activities such as bathing, diving, or water skiing that involve high temperatures, steam, or rapid water flow.

Note that the waterproof performance may be compromised if the product structure is damaged

• .Be aware that firmware upgrades can lead to interface and usage changes. For detailed information, please refer to the product’s upgrade instructions.

Help and Guide

Frequently Asked Questions

If you encounter any problems while using the product, you can access the “Profile → Help” section in the Fitbeing app for assistance. Scan the QR code on the right to access or visit help.fitbeing.net for assistance.

Product Manual

You can find the complete product manual in the Fitbeing app at “My Watch → Product Manual”. Scan the QR code on the right to access it, or visit help.fitbeing.net to browse.

FCC Requirement

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1.  this device may not cause harmful interference, and
2.  this device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

ISED

This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s license-exempt RSS(s). Operation is subject to the following two conditions:

1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of the device.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>