Colesma I68 Small Smart Watch for Women User Manual

Colesma I68 Small Smart Watch for Women

Product Specifications

• Model: I68 Smart Watch
• Compatibility: iOS and Android
• Connectivity: Bluetooth
• Charging Time: Approximately 2 hours

Product Usage Instructions

Connect Smart Watch

1. Switch on the watch by long-pressing the side button for 3-5 seconds.
2. Ensure phone’s Bluetooth and location services are on and the watch is not bound to other devices.
3. Open FitCloudPro APP on your mobile, set personal information, enter device interface, click on Bind Device.

Charging the Watch

1. Open the box and use the I68 charging cable to charge the watch using a USB port with 5V.
2. Ensure the watch is fully charged before first use (approximately 2 hours).
3. Make sure charging contacts are clean to ensure proper charging.

Booting and Shutting Down Device

1. To boot the device, long-press the watch key for 5 seconds.
2. To shut down the device, long-press the watch key for 5 seconds at the watch face page and select shutdown.

Firmware Upgrade

If a system update is available, a prompt will be shown for a firmware upgrade.

FAQ

How do I change watch faces?

To change watch faces, long-press the watch face button to cycle through different faces. You can also download more faces via the FitCloudPro app.

How do I pair the watch with the app?

To pair the watch with the app, ensure Bluetooth and location services are on, open the FitCloudPro app, set personal info, and click on Bind Device.

Product Overview

APP download

1. Search ”FitCloudPro” in the APP store.(Apple store/Google store).
2. Scan QR code to download.

User tips

When installing the APP, it will be prompted to access the phone permissions. Please allow all permission:

1. Bluetooth
2. Notification (including alerts /sounds/ icon badges)
3. Local network in the “FitCloudPro” APP.

Connect Smart Watch

1.  Switch the watch on long press the side button for 3-5 seconds.
2.  Please turn on the phone’s Bluetooth and location service and make sure the watch is not bound to other devices.
   Open the “FitCloudPro” APP on your mobile phone, Set your personal information, and enter the device interface, Click on “Bind Device”. Right- slide on the main dial interface of the watch to view the MAC address, You can use the MAC address from the device list to determine your device, The device name and the corresponding MAC address are paired. the device is successfully connected.

• Step 1: Open “FitCloudPro” APP — ”OK, Allow” — ”Add A DEVICE” –Find “I68” and choose— ”Pair” — “Allow” –Done
• Step 2: Go to your mobile phone Bluetooth–Find Watch call and choose—connected.

Tips for first-time use:

The first time to use the watch, please make sure the battery is fully charged.

1. Open the box, use the I68 charging cable, then insert the USB to your laptop or any USB port with 5V to charge the Watch before use to ensure that the Watch is fully charged. The charging time is about 2 hours. To ensure that the charging contact is good. Please ensure that the metal surfaces are not dirty, oxidizing, or impurities. When charging, the screen will display the charging symbol. If the device is not used for a long time, please be sure to replenish it every month.
2. When the Watch is first paired with “APP”, it will synchronize the time, date, and quantity of the Watch battery and display the symbol of the success of the BT connection.
3. How to Boot Device: Long press the watch key for 5 seconds and the Watch will boot.
4. How to Shut Down Device: At the watch face page, Long press the watch key for 5 seconds, then choose to shut it down. The watch will be turned off and with vibration.

Introduction to the function interface of the watch

1. Dial interface, long press on the dial interface, swipe left and right to select 4 dials, display date, time, week, etc.
   APP more change disk push: enter “FitCloudPro” APP – dial settings – discover more dials – select – sync – download and complete

2. From the dial interface, swipe left and right to enter the secondary menu Other functions: Enter to set brightness, switch dials, restore factory settings, etc.

   • Phone: Enter to access the call log, contacts, and dial pad. Heart rate: Enter to test the heart rate and sync it to the APP. Weather: Enter to access the current weather.
   • Step count: Click to enter to get the step count information and data of the watch.
   • Sleep: Record recent sleep information, including deep sleep, light sleep, etc.
   • Music control: You can control the phone to play music, and the music comes out of the watch. You can control pause, play, previous, and next.
   • Blood pressure: Click to enter blood pressure measurement and sync to APP.
   • Blood oxygen: Click to enter blood oxygen measurement and sync to APP.
   • Camera control: Entering will open the phone camera, touch the watch to control the phone to take pictures.
   • Timer: Select the time to enter the countdown.
   • Stopwatch: Click to enter the seconds function.

3. On the dial interface, swipe from top to bottom to enter the following interface.

   • Do Not Disturb Mode: You can enable or disable the Do Not Disturb mode.
   • Brightness adjustment: You can adjust the brightness of the watch.
   • Style switching: Enter the secondary menu, and quickly press the button twice to switch styles.

4. APP use introduction: Enter the“ FitCloudPro” APP on the mobile phone, and follow the instructions below. Dial selection: After connecting the watch, you can switch the dial.

   • Message push: push message settings of daily APP.
   • Daily Alarm: Alarm setting.
   • Remote camera: enter to control the phone to take pictures.
   • Other settings: Enter to set sedentary reminder, time format, drinking water reminder, etc.
   • Firmware upgrade: If the system is updated, it will push an upgrade prompt.

Parts Introduction

Watch 1
Charging clip1
Box 1
Manual 1

Warranty Description

• When this product is in normal use, if there is a product quality problem caused by manufacturing, material, design, etc., it will be guaranteed for one year free of charge from the date of purchase.
• No free warranty is provided for failures caused by the user’s personal reasons, as follows:
  • Failures caused by unauthorized disassembly, modification of watches, etc.
  • Failure caused by accidental drop during use.
  • All man-made damage or due to the fault of a third party, misuse (such as: water in the host, external force cracking, damage to peripheral parts scratches, etc.), are not within the scope of the warranty.
• When the user repairs the product, please take the product to the company or the company’s distribution point. All functions of the product are mainly in kind.

APP Functions and Settings

• Main interface/dial
  Switch the customized dial through the APP

• Discover more dials through APP
  APP device page dial selection find more dials click on your favorite dial picture click to download now. Please do not leave the download page during the download.

• Personal Profile
  Set personal information when you login. My data-personal date. Gender – height – weight- age .

• Call reminder
  Keep connected, if the call alert function is enabled, the wristband will vibrate and display the name or number of the caller when the call

• Notifications
  Keep connected, if this function is enabled, the bracelet will vibrate when there are messages such as Wechat, Facebook, twitter and so on. (Give the APP access to system permission).

• Alarms: set the alarms.

• Shutter: this function will control your mobile phone to take photos from your watch.

• Favorite Contacts: you can add your mobile phone contacts to your watch.

• Others: you can set “Find a watch”, “Time format”, “Sedentary reminder”, “Raise your wrist to brighten the screen”, or “Drink water reminder”.

• Upgrade: upgrade the watch software when necessary.

Note:

1. When using GPS under sports mode, please turn on location services for the phone and device, the watch does not have a GPS function, you can open the GPS function in the APP.
2. The data of steps, sleeping, heart rate, blood pressure, and blood oxygen saturation of the watch will be synchronized to the APP. The relevant data can be synchronized by pulling down the corresponding page. More detailed information analysis and data from the record can be viewed from the APP.
3. Each time you open the APP, the watch will automatically connect to the phone. After the right slide of the main interface of the watch to enter the MAC address interface, the Bluetooth icon will appear, indicating that Bluetooth is connected. If there is no Bluetooth icon, Bluetooth is not connected.

Watch function interface

1. Watch face: long pressing the watch face button, it can be changed to 4 different watch faces. showed Dates, Times, etc. More default watch faces: go to APP“ FitCloudPro” —Watch faces–Discover more dials—Choose dial–Download immediately—–Done. Then you can see the dial will be shown on your watch.
2. From the watch face page, put your finger slide to the left and right pages.
   • Sports: show the step counts.
   • Sleep： show the sleep status, like sleep time, deep sleep time etc.
   • Measure HR: measure your heart rates.
   • Exercise information: record various exercise information and data.
   • Phone: you can check Phone call records, Contact, and Dial pad.
   • Measure BP: measure your blood pressure.
   • Blood oxygen: measure blood oxygen.
   • Weather: show weather status.
   • Shutter: this function will control your mobile phone to take photos from your watch.
   • Player: Music control, play or pause, last music or next music.
   • Others: In this page, you can set the dial switch, brightness etc.
3. On the watch face page, you can go to the following page by touching the finger from top to bottom.
4. Do not disturb: you can turn on or off the do not disturb function.
5. Brightness: you can adjust the brightness.
6. Settings: You can set a stopwatch, alarm clock, timer, brightness, phone switch, call settings, vibration, theater mode, factory reset, shutdown, about, and APP download.

Vibration setting/Brightness adjustment/Bracelet reset

Down slide screen will display the interface.

1. Click brightness adjustment, you can adjust the screen brightness you need according to the usage.
2. If you need to use the watch with another phone, you need to reset the watch.Click Restore factory settings, the watch will be restored to the initial state and restart automatically, at this time all data on the wristband is cleared.
3. Click the “SYSTEM” icon, and you can check the version information, Bluetooth MAC address, battery percentage display, and Bluetooth connection status.

Why the watch can’t receive the message notification?
Since the Android mobile phone background will automatically clean up the APP which is not commonly used, it will cause the watch connection to drop and no longer push the message.

1. Make sure to turn on message push in the “FitCloudPro” setting.
2. Make sure the message can be displayed in the mobile phone’s notification bar, the message notification is pushed by reading the phone notification bar, and the watch can’t get notification if the message push is closed in the mobile phone setting.

Note: Find notification settings in phone settings, and turn on WhatsApp, Facebook, Twitter, Phone, and SMS.

Getting to know your Device

It is forbidden to throw this product into the fire to avoid an explosion. The battery life varies according to the environment and user mode.
Warning: This product is not a medical device. The Watches and their applications should not be used for diagnosis, treatment, or prevention of diseases and illnesses. please consult a qualified medical doctor first if you want to change your habits such as exercises and sleep to avoid causing serious casualties. Our company reserves the right to modify and improve the functions described in this manual without prior notice. At the same time, we also reserve the right to continuously update the product. All contents are subject to the actual product.

Why does the blood pressure data be different from the Sphygmomanometer?
The difference between the smartwatch data and the sphygmomanometer is determined by a variety of factors. The measurement site of the sphygmomanometer is in the radial artery, and the measurement site of the watch is the two main branches of the arteriole. Normally, the difference value between aortic blood pressure measurement and micro arterial measurement is 3~40. because the blood flows in the artery in the direction of the centrifuge, If you use the smart watch and sphygmomanometer to measure at the same time the sphygmomanometer band makes your elbow under pressure. The blood pressure cannot flow smoothly to the lower branch of the artery and increased vascular tension, will make the difference larger.

Why can’t wear the smart watch to take a bath &hot springs&sauna?
The bath water temperature is relatively high, it will produce a lot of water vapor, and the water vapor is gas phase. Its molecular radius is small, it is easy to infiltrate from the shell gap of the watch, and when the temperature drops, it will recondense into a liquid phase. Water droplets can easily cause short circuit inside the watch, damage the circuit board and damage watch itself.
Special attention: For other issues of watch’s usage, you can get detailed answers in the APP suggestion feedback.

Basic parameters

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>