EPSON 111-56-QUM-009 KDS Menu Routing User Guide
- June 15, 2024
- Epson
Table of Contents
EPSON 111-56-QUM-009 KDS Menu Routing
About this guide
This guide consists of 2 sections
- Overview- A detailed description of what KDS Menu Routing is and its functionality in an Epson True Order Kitchen Display System (KDS).
- How to Configure KDS Menu Routing – A procedure that can be followed to configure this in a Multi-Station KDS system.
Overview
In KDS Menu routing all print jobs are sent directly from the POS to a single KDS device (Master Device). The menu configuration and routing determine which displays the orders are sent to. In Figure 1 the Master Display gets the full order, then shows only grill items while routing the French Fries to the Fry station.
EPSON is a registered trademark and EPSON is a registered logomark of Seiko Epson Corporation. All other product and brand names are trademarks and/or registered trademarks of their respective companies. Epson disclaims any rights in these marks. Copyright 2023 Seiko Epson Corporation.
How to Configure KDS Menu Routing
This guide assumes that you already have a 2-Station KDS system setup as described in the Epson KDS Multi-Station Quick Start Guide.
- Configure Site Wide Settings
- Select Application Settings.
- Select POS Connected Device.
- Select KDS Menu Routing from the drop-down menu.
- Click Save.
Configure Menu Items and Groups.
Please consult the KDS Menu and Recipes Quick User Manual for more details
about how to configure a menu.
Configure the Menu Items for your Displays.
- Click Layout.
- Select Grids.
- Select the Layout you want to configure (e.g., Kitchen).
- Enable the Menu Items Filter.
- Select the Menu Items you want shown on that Display.
- Click Save.
- select Menu Item/s to display.
- Click Save.
- Click Publish.