Nowodvorski 7736 Mono Surface Long II Instruction Manual
- June 15, 2024
- Nowodvorski
Table of Contents
Nowodvorski 7736 Mono Surface Long II
Product Information
Specifications:
- Model: MONO SURFACE LONG II
- Product Codes: 7736 | 7740, 7743 | 7678, 7682
- Quantity: 2 x 2 x 8
- Minimum Length: 35 mm
- Maximum Length: 31 mm
- Weight: 160 grams
Product Usage Instructions
Assembly:
- Ensure you have all the components required for assembly.
- Follow the provided diagrams and instructions to assemble the product.
Adjusting the Light Source:
When adjusting the direction of the light source, it is important not to force the rotation past the blockade resistance. Follow these steps:< /span>
- Locate the light source.
- Gently rotate the light source in the desired direction.
- If you encounter resistance, do not apply excessive force.
Maintenance and Cleaning:
To ensure optimal performance and longevity of the product, follow these maintenance and cleaning guidelines:
- Regularly wipe the product with a soft, dry cloth to remove dust and dirt.
- Avoid using abrasive cleaners or solvents that may damage the product.
Troubleshooting:
If you encounter any issues with the product, refer to the troubleshooting section of the user manual or contact our customer support for assistance.< /span>
Safety Precautions:
For your safety and the safety of others, please adhere to the following precautions:
- Read and understand all instructions and warnings before using the product.
- Keep the product away from water and other liquids.
- Avoid exposing the product to extreme temperatures or direct sunlight.
- Do not attempt to disassemble or repair the product yourself, as it may void the warranty.
FAQ:
Q: How do I adjust the direction of the light source?
A: To adjust the direction of the light source, gently rotate it in the desired direction. If you encounter resistance, do not force it past the blockade.
Q: What should I do if I encounter issues with the product?
A: If you experience any issues with the product, refer to the troubleshooting section of the user manual or contact our customer support for assistance .
TOOLS
INSTALLATION
Dear Customers,
We would like to inform you, that surfaces of light fixtures made of solid
brass as well as brass coated light fixtures may slightly vary from one
another.
Differences may be within the colour and may be the result of the fact, that
brass is natural material which is a subject to oxidation. The surface of the
material may also be slightly heterogenous, which is the result of
manufacturing and material processing.
The differences on the surfaces of light fixtures made of solid brass as well
as brass coated surfaces, which are the results of natural properties of the
material, are small and do not affect the aesthetic and functional values of
the luminaires. Therefore, the manufacturer of the light fixtures, NOWODWORSKI
Sp.j. company, does not consider them as defective and does not accept
complaints in this respect.
ATTENTION !!!
When adjusting the direction of the light source, do not force the rotation
past the blockade resistance.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>