Zouzai LBT-3 Flush Mount 12 Inch Ceiling Light Instruction Manual

Zouzai LBT-3 Flush Mount 12 Inch Ceiling Light

Model Number

• LBT-3/7XDPL-15-S, LBT-3/9XDPL-18-S, LBT-3/12XDPL-24-S
• This Fixture is Ceiling Mounted, remodel into Cans/Housing/Jbox 191 READ the ENTIRE INSTALLATION PROCEDURE BEFORE YOU BEGIN!

WARNINGS AND CAUTIONS

• SHUT OFF POWER AT THE CIRCUIT BREAKER OR FUSE PANEL BEFORE REMOVING THE OLD FIXTURE AND/OR INSTALLING A NEW ONE.
• Read the entire installation procedure before you begin and save instructions for future reference.
• If unsure whether the electrical box is properly grounded, or the box is plastic and has no ground wire, or are unfamiliar with the methods of properly grounding fixture, consult a qualified electrician.

RISK OF ELECTRIC SHOCK

• Turn the power off before inspection, installation, or removal.
• Properly ground electrical enclosure.

RISK OF FIRE

• Follow all NEC and local codes.
• Use only UL or IEC-approved wire for input/output connections.
• Minimum size 18AWG (0.75 mm).
• CONSULT A QUALIFIED ELECTRICIAN TO ENSURE THE CORRECT BRANCH CIRCUIT
• THIS PRODUCT MUST BE INSTALLED BY THE APPLICABLE INSTALLATION CODE BY A PERSON FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT AND THE HAZARDS INVOLVED.

Electrical Requirements

• The LED luminaire must be connected to the mains supply according to its ratings on the product label.

Grounding Instructions

• The grounding and bonding of the overall system shall be done by the local electric code of the country where the luminaire is installed.

Important Safety Information

• Do not look directly at LEDs for an extended time.
• Suitable for INDOOR damp locations.
• Turn the power off before servicing.
• Do not leave bare wires exposed.
• Use Minimum 90°C supply conductors. For additional electrical requirements, see fixture.
• DO NOT alter this fixture. It is not manufactured with replaceable or serviceable parts.

Rated Power:| 15W-18W-24W| Working Temperature:| -25°( ~+50°(
---|---|---|---
Lumens:| 1810LM-2160LM-2880LM| Service Life:| 50,000 hrs
Beam Angle:| 110°| CRI:| Ra>85
Input Voltage:| AC120V 50/60Hz| CCT:| 5CCT  (2700K-3000K- 4000K-5000K-6000K)

INSTALLATION OVERVIEW

Support 2″/3″/3.5″/4″ J-Box

1. Turn off the main power before installation.

2. Using the box screws (FF), secure the mounting bracket to the junction box (J-Box).

3. To make installation easier, a pre-attached support wire is located on the back of the fixture. Attach the hook end through the center hole of the mounting bracket to suspend the fixture in place while the wire connections are made.

4. Connect the wires of the ceiling light to the wires on the junction box, L-L, N-N, GND-GND.

5. Leave the support wire attached to the mounting bracket. Align the mounting slots on the back of the fixture with the metal tabs on the mounting
   bracket. Until the tabs click and lock into place and the fixture is secure.

6. Restore the main power.

Support 6″ remodel cans

1. Remove trim and existing lamp from a recessed fixture.
2. Screw the E26 socket adapter into the socket in the housing.
3. Press the friction blade to insert the lamp into the housing and restore power.

INSTALLATION KIT

5 LIGHT SETTING SLIDE SWITCH

• Slide switch that allows the color temperature of the light to be adjusted between 5 values: 6000K, 5000K, 4000K, 3000K, 2700K

TOOLS NEEDED NOT INCLUDED

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>