zouzai 4INCH6INCH-JJK Ultra Thin LED Recessed Light User Manual
- June 15, 2024
- zouzai
Table of Contents
zouzai 4INCH6INCH-JJK Ultra Thin LED Recessed Light
SAFETY INSTRUCTION
zouzai ‘s recessed lighting is certified by ETL & Energy Star (except 5000K &
6000K & 5CCT) of a high standard.
This canless LED recessed light is IC rated, with more convenient and secure
UL connectors. But to reduce the risk of death, personal injury or property
damage from fire, electric shock and other hazards, please read all warnings
and instructions included with and on the fixture box and all fixture labels,
please review instructions carefully before proceeding.
WARNING
RISK OF ELECTRIC SHOCK
- All electrical connections must be in accordance with local and National Electric Code (N.E.C.)standards.
- Consult a qualified electrician if you are unfamiliar with proper electrical wiring connections.
- Turn off the switch and circuit breaker before installing this LED light.Do not alter, re-locate or remove wiring.
- Double-check all connections to be sure they are tight and correct.
- Verify that supply voltage is correct by comparing it with the luminaire label information.
RISK OF FIRE
- Keep combustibles and other materials that may burn away from lights.
- The maximum ambient temperature is 104°F. Do not operate fixture at temperatures higher than it.
CAUTION
RISK OF INJURY
- The knockouts may be sharp. Wear gloves and safety glasses at all time when removing luminaire,installing or performing maintenance.
- Avoid direct eye exposure to the light source while it is on.
- Wear rubber-soled shoes and work on a sturdy wooden ladder.
RISK OF BURN
- Do not touch enclosure or light source. It is normal of the luminaire surface heating up during work.
Allow lights to cool before handling.
RISK OF PRODUCT DAMAGE
- Electrostatic Discharge (ESD): ESD can damage LED fixtures. Personal grounding equipment must be worn during all installation or servicing of the unit.
- Do not touch individual electrical components as this can cause ESD, shorten lamp life, or alter performance.
- Do not mix our product with other products (including zouzai ‘s light, eg. 4″ and 6″). Mixing junction box of different power will lead to the destruction of the product.
- Do not let the product directly contact with water. Our product is damp-rated but it is not water-proof.
- Do not make or alter any open holes in an enclosure of wiring or electrical components.
- Never connect components under load.
- Please make sure that all wires in and out are wired firmly and sufficiently. If not, there will be a flickering issue or the light will just stop.
IMPORTANT
- Our temperature has been strictly monitored. But the temperature will be slightly different with varied monitors. Please test them before installation up in the ceiling wall and see the color if it meets your needs.
- If there is anything wrong with our lights, please see the Troubleshooting page. If you could not find an answer in that page, please refer to the Customer Service page and contact us.
ROUTINE MAINTENANCE
- Please make sure the power is off before maintenance.
- To avoid any damage to the product, please do not use any chemical solvents during the routine maintenance.
- To ensure better lighting, please clean the lamp at regular intervals.
LIMITED WARRANTY
This product is warranted to be free from defects in workmanship and materials
for up to 5 years from date of purchase.
If it fails to do so, please send us an e-mail.
Contact via Email: zouzai_service@163.com
INSTALLATION STEPS
- Turn off the main power before installation.
- Using the box screws (FF), secure the mounting bracket to the junction box (J-Box).
- To make installation easier, a pre-attached support wire is located on the back of the fixture. Attach the hook end through the center hole of the mounting bracket to suspend the fixture in place while the wire connections are made.
- Connect the wires of the ceiling light to the wires on junction box, L-L, N-N, GND-GND.
- Leave the support wire attached to the mounting bracket. Align the mounting slots on the back of the fixture with the metal tabs on the mounting bracket. Until the tabs click and lock into place and the fixture is secure.
- Restore main power.
- Remove trim and existing lamp from recessed fixture.
- Screw E26 socket adapter into socket in the housing.
- Press the friction blade to insert the lamp into the housing and restore power.
DIMMER COMPATIBILITY GUIDE
The number of lights that a dimmer can control in one circuit.
- 4″: the dimmer rated power (watt) /9watts*75%.
- 6″: the dimmer rated power (watt) /12watts*75%
SPECIFICATIONS
INSTALLATION KIT
CUSTOMER SERVICE
12 HOURS QUCIK RESPONSE
If there is any problem with our light, please refer to the Troubleshooting
page on the back. If you still could not fix this, please contact us
immediately.
It doesn’t matter if you have installed the product, we will respond within 12
hours.
The fastest way to help us confirm the problem is to send us a video of the
problematic light to our official email box.
30-DAY MONEY-BACK
For 30 days after the date of purchase, return your zouzai product and
receive a full refund for ANY reason.
5-YEAR WARRANTY
For 5 years after the date of purchase, if there is any issue with the
product, we will send a new product for free or a full refund. (no need to
return the purchased product)
Under most conditions, we will not require you to return the purchased items.
Sure, if you would return the defective one(s) to us, we will be very happy
for that would help us to make continuous improvements.
Free Replacement No Repair
After the buyer purchases the product, if the product has a quality problem
within the scope of the seller’s warranty service within the service validity
period, the seller will replace the buyer with a new product for free.
Friendly Reminder
We sincerely hope to solve the problem for you. We do not recommend that you
leave a product rating first, because we cannot obtain your contact
information through the review/feedback nor can we obtain your relevant
information and provide you with compensation.
Please rest assured that our service aim is to make customers 100% satisfied. If there is any problem, please contact us as soon as possible, we will not let you down.
COMMON TROUBLESHOOTING
We are an LED manufacturer with 5-year experiences and receive feedback from
more than 1000 customers every year. According to our statistics, 95% of
customers’ problems are related to the method of installation and the use of
dimmer, which could be solved by customers themselves. To save your valuable
time, please read this introduction first to quickly identify the cause, if
you encounter any problems.
Problems you may encounter
Contact US
Contact by “Ask a quesion” on the “zouzai” Seller Page.(7x24H) Because
Amazon’s information system sometimes can’t successfully receive and send
information, in which case you may not receive our response. We will never be
able to reply to your inquiry. If you find that we have not responded to you
within 24 hours, please send us an e-mail. Contact via Email:
zouzai_service@163.com (7x24H)
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>