BLOW RA6 Portable Bluetooth Analog Radio User Manual

June 15, 2024
BLOW

Portable Bluetooth Analog Radio RA6
User manual

BLOW RA6 Portable Bluetooth Analog Radio

DESCRIPTION

1. Antenna 9. AC socket
2. Handle 10. Memory SD card slot
3. Radio tuning control 11. USB port
4. Headphone Jack 12. Mode
5. Volume control 13. Preview
6. Radio band sector 14. Play/pause
7. Frequency scale 15. Forward
8. Battery cover

BLOW RA6 Portable Bluetooth Analog Radio - DESCRIPTION

Battery Supply
Open the battery compartment and insert as indicated in the compartment three Batteries, type R20.
The battery supply is switched off when the set is connected to the mains. To change over to battery supply, pull out the plug from the MAINS socket.
Mains Supply
Connect the mains lead to the wall socket. The mains Supply is switched on.
To disconnect the set from the mains completely, withdraw the mains plug from the wall socket.
Radio

  1. Select the wave band using RADIO BAND SELECTOR.
  2. Adjust the sound with the controls VOLUME.
  3. You may connect stereo headphones with 3.5mm, plug to socket PHONES. The loudspeakers are then muted.
  4. Switch Bluetooth, USB, memory card playback mode with the MODE button.
  5. Tune to a radio station using TUNING knob.

To improve reception:

  • For FM, pull out the telescopic aerial. To improve FM Reception incline and turn the aerial, reduce its length if the FM-signal is too strong (very close to a transmitter).
  • For AM, the set is provided with a built-in aerial, so there is no need to use the telescopic aerial. Turn the set to find the best position.

SPECIFICATIONS

AM/FM (AM 530-1600kHz, FM 87-5 – 108 MHz)
Speaker: 3,5 inches, 8 ohm dynamic speaker
Power Output: 0.8W Socket AUX 3.5mm

Memory Card SD slot
USB port
Telescopic antenna
Power supply:| DC 3V (2xR20)
AC 230V ~ 50Hz
Dimensions:| 210 x 73 x 110 mm

PRECAUTIONS

  1. For AC operation, make sure the voltage is compatible. Always use the provided AC power cord; never use other AC power cord. For DC operation, simply insert three “UM-2 / C” batteries for unit operation.

  2. Always disconnect the AC power cord from the AC power source when it is not in use or when DC power is operating.

  3. Do not leave the batteries in the compartment for a long time. Remove the batteries to avoid leakage and damage.

  4. Do not expose the unit to extreme temperature nor high humidity to ensure normal functioning for a long lifetime.
    For instances, never place the unit in bathing areas nor around stoves and radiators.

  5.  If you find the unit is not working properly, please take it to your nearest services centre. Do not attempt to repair by yourself.

WARNING :
To prevent fire or shock hazard, do not expose the unit to rain or moisture.
To avoid electrical shock, do not open the cabinet, refer to service agent or qualified engineer only.
** Electrical equipment marked with the bin icon cannot be disposed of along with ordinary municipal waste. Such equipment should be collected and recycled.
DECLARATION OF CONFORMITY
** Nazwa wyrobu: Radio FM Bluetooth
Marka: BLOW
Kod produktu: 77-535#
Model: RA6
The company Prolech Sp. z o.o. Stary Puznów 58B, 08-400 Garwolin, Poland hereby declares that the product: FM Radio Bluetooth, brand: BLOW, product code: 77-535 #, model: RA6 is compliant with directives 2014/53/EU, 2011/65/EU, (EU)2015/863.
The full text of the declaration of conformity is available at the following internet address: www.prolech.com.pl

Manufactured in P.R.C. for:
PROLECH Sp. z o.o.
Stary Puznów 58B, 08-400 Garwolin, Poland
www.blow.com.pl
Service:
BLOW Service
Stary Puznów 58B, 08-400 Garwolin, Poland
www.blow.com.pl

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals