BIGBIG WON BLITZ Wireless Switch Controller User Manual
- May 15, 2024
- BIGBIG WON
Table of Contents
BIGBIG WON BLITZ Wireless Switch Controller
NAME OF EACH PART
PACKAGE CONTE| Blitz 1 / User Manual 1 / Quality Certificate 1 / USB
cable 1
---|---
SUPPORTED PLATFOR| Switch / win10/11 / Android/iOS
TURN ON/OFF
Press HOME button for 3 seconds to turn on/off the controller.
CONNECTION
The controller is equipped with two connection ways, Bluetooth connection and
wired connection. The connections are as follows:
Bluetooth connection: After the controller is switched on, press the top
pairing button for 3 seconds; the HOME indicator flashes quickly, meaning it
is in pairing status; the HOME indicator will become solid after the
connection is successful. (In Switch mode, the bright channel indicator
depends on the sequence of the controller on the console)
Wired connection: After the controller is switched on, use a type-C cable
to connect the controller and the console.
Note: Please note that the controller is compatible with Switch and
Xinput modes. After the connection with the console, you need to switch to the
mode corresponding to the machine. Switch is the default mode.
Steam: To connect with Steam, you need to tick “Xbox Configuration
Support” in the “Settings-Controller-GENERAL CONTROLLER SETTINGS” of Steam
otherwise the controller may not be recognized in games.
Switch: After connecting Switch via wired connection, you need to enable
the “System Settings – Controller and Sensors – Pro Controller Wired
Communication”.
MODE SWITCH
The controller is compatible with Switch and Xinput. You need to switch to the
corresponding mode for proper uses. The settings are as follows: Press A +
HOME for 3 seconds until the HOME turns red, meaning it has switched to the
Switch mode;
Press B + HOME for 3 seconds until the HOME turns green, meaning it has
switched to the Xinput mode.
Notice: If you need to connect iOS and Android mobile with Bluetooth
please turn the controller to Xinput mode
REMAP
The controller is equipped with four remappable additional buttons and compatible with key mapping settings. The settings are as follows:
Set key mapping: Press the + (M1/M2/M3/M4); the FN indicator shows a breathing status, meaning it is in key mapping status; Then press the target button mapped to M1/M2/M3/M4; the FN indicator flickers twice, meaning the key mapping is successful.
Clear single key mapping: Hold the button for clearing key mapping (M1/M2/M3/M4) and double click the ; the FN indicator flashes twice, meaning the key mapping of the selected button is cleared successfully.
Clear all key mapping: Double click the , the FN indicator flashes twice, meaning the key mapping of all the buttons is cleared successfully.
TURBO
The controller supports turbo settings. The supported button include A/B/X/Y, ↑/↓/←/→, L/R/ZL/ZR, M1/M2/M3/M4.
The settings are as follows:
Set TURBO: Hold the + the “target key”; the FN indicator flickers twice, meaning the function is enabled successfully. (When TURBO is operated, the FN indicator flickers with current turbo frequency)
Clear single TURBO: Hold the “target button” and double click the ; the FN indicator flickers twice, meaning the function of this buttons is disabled successfully
Clear all TURBO: Double click the , the FN indicator flickers twice, meaning the function of all the buttons is disabled successfully.
TURBO frequency: You can switch to any of the three frequencies, 5s, 10s, and 20s, by pressing FN + ←. The default is 5s.
MACRO RECORDING
The controller support MACRO recording. Each set of MACRO must be bound with a back key (M1/M2/M3/M4) as a trigger switch. The keys that use the function include A/B/X/Y, ↑/↓/←/→, L/R/ZL/ZR, joystick L/joystick R, and joystick. The settings are as follows:
Record MACRO: Hold the + (M1/M2/M3/M4) for 3 seconds; the FN indicator is in a breathing status, meaning it is in MACRO recording. Press any key for MACRO recording, and click the key after the recording is finished; the FN indicator flickers twice, meaning the recording is finished. (When MACRO is operated, the FN indicator is flashing slowly status until the MACRO operation is finished)
Clear single MACRO: Press the “target key” (M1/M2/M3/M4)” and double click the ; the FN indicator flickers twice, meaning the MACRO of the selected key is cleared successfully.
Clear all MACRO: Double click the , the FN indicator flickers twice, meaning the function of all the buttons is disabled successfully.
ONBOARD CONFIGURATION
Switch mode: Click the and the channel indicator will change from red to
white, which means entering the configuration switch mode. The four indicators
in this mode show four different onboard configurations;
Click the again to start the configuration switching, and the indicator lights
will switch in order from top to bottom. The first indicator is the first
configuration and so on.
If there is no action within the 5s configuration switch mode, it will
automatically exit the mode, the indicator will change from white to red, and
the indicator will back to the channel indicator.
Xinput mode: There is no channel indication function in this mode, so the
indicator light is white by default, indicating the current onboard
configuration. In this mode, clicking the will switch the configuration
directly.
Reset the configuration : Press the Configuration switch button for 3
seconds to clear all settings of the current configuration.
JOYSTICK DEADZON
The controller is designed for competitive games. Therefore, we chose zero
deadzone for the joystick in our factory settings. This will make the
controller have better control accuracy and result in slight drifts in games
without deadzones. We hereby provide two deadzones, 0/10, to meet the various
demands of our users. The settings are as follows:
Press the FN + push the left or right joystick (LS/RS) to switch between 0 and
10 for the deadzones of the joysticks.
JOYSTICK CALIBRATION
When the joystick drifts and cannot be pushed to the maximum value, you can try to calibrate the joystick, and the operating method is as follows:
- Press and hold + and – keys at the same time for 3 seconds, and the left and right light strips will breathe in orange at the same time, which indicates entering the calibration mode.
- Push the joystick to the limit value and rotate it at a constant speed. Repeat the operation for 3-5 times.
- Finally, press + and – keys at the same time, and the left and right light strips will go out after double flashing, which indicates the calibration is completed.
GYROSCOPE CALIBRATION
When the gyroscope of the controller drifts, you can try to calibrate the gyroscope, and the method is as follows:
- Place the controller on a horizontal table, press + key and screenshot key at the same time, and the left and right light strips will breathe in purple at the same time, which indicates entering the calibration mode.
- Wait for a moment, and when the left and right light strips double flash in purple, it indicates the calibration is completed.
VIBRATION ADJUSTMENT
The controller is equipped with four levels of vibration adjustment. The
settings are as follows:
Press the FN + → to circularly switch to any of the four vibration levels of
the trigger motor, namely Strong, Medium, Weak, and Off.
BATTERY INSTRUCTION
When the battery is too low, the light strip on both sides of the controller
will flash red light 2 times per second for 10 times, every five minutes to
remind.
After connecting to the power supply, the light strip will red breathing
indicated in the charging state. The light strip will returns to its original
state when the charging is finished.
Charging stand: stand without any light indication in the standby status.
When the controller is connected to the stand the stand’s lights will turn on,
it means the controller is charging. If the light is always on in green, it
means the controller battery is full.
DETAILED FUNCTIONAL OPERATION INSTRUCTIONS
Please access ”BIGBIG WON Official Website>Support” to check the instruction https://www.bigbigwon.com/support/
YOUR RIGHTS
12-month limited warranty from the date of purchase.
WELCOME TO THE BIGBIGWON COMMUNITY
The BIGBIG WON community is built to connect those who seek the winning edge. Join us Discord and Follow our social channels for the latest offerings, exclusive event coverage, and opportunities to score BIGBIG WON hardware.
@BIGBIG WON
BIGBIG WON DISCORD
Scan the QR code to watch video tutorial
Visit the official support page for a detailed video tutorial / FAQ / User
manual / APP Downlod
www.bigbigwon.com/support
BIGBIG WON SUPPORT
Documents / Resources
|
BIGBIG WON BLITZ Wireless Switch
Controller
[pdf] User Manual
BLITZ Wireless Switch Controller, BLITZ, Wireless Switch Controller, Switch
Controller
---|---