grace digital GDI-WHA6001 MONDOPLUS 5:1 Universal Size Oil Pump User Guide

June 17, 2024
Grace Digital

grace digital GDI-WHA6001 MONDOPLUS 5:1 Universal Size Oil Pump

Product Specifications

  • Model: GDI-WHA6001…GDI-WHA6010
  • Supports WPA / WPA2
  • Bluetooth audio streaming to every room of your house

Product Usage Instructions

Introduction
Thank you for purchasing the Grace Digital Mondo+. Your Mondo+ comes with everything you need to enjoy music in your home.

Safety and Care Information
IMPORTANT! Always read and understand all the instructions to avoid injury to yourself and/or damage to your device. Grace Digital disclaims all responsibility for damage from data loss due to breakdown, repair, or other causes.

Home Screen Icons
The home screen icons provide quick access to various features and functions of the Mondo+. Familiarize yourself with these icons to navigate through the device easily.

Navigation Basics
This section will guide you on how to navigate through the different menus and options available on the Mondo+.

Chromecast built-in
The Mondo+ supports Chromecast built-in feature, allowing you to stream audio from your favorite apps directly to the device. Learn how to set up and use this feature in this section.

Multi-Room Mode
If you have multiple Mondo+ devices, you can use the Multi-Room Mode to synchronize audio playback across all devices. Follow the instructions in this section to set up and use this feature.

Troubleshooting

If you encounter any issues with your Mondo+ device, refer to
this section for troubleshooting tips and solutions.

Listening to Recent Shows/Channels
Learn how to access and listen to recently played shows or channels on the Mondo+ in this section.

Listening to Favorites
Discover how to listen to your favorite shows or channels on the Mondo+ and manage your favorites list.

Product Specifications
Refer to this section for detailed specifications of the Grace Digital Mondo+.

Detail Streaming Protocol Support
This section provides information about the streaming protocols supported by the Mondo+.

Detail Audio Codec Support
Find out the audio codecs supported by the Mondo+ in this section.

Environmental Information
This section contains environmental information regarding the Mondo+ device.

FCC Statement

Read the FCC statement for regulatory compliance information regarding the Mondo+ device.

FAQ

Q: How do I connect my Mondo+ to my home Wi-Fi network?
A: Follow the instructions provided in the user manual to connect your Mondo+ to your home Wi-Fi network. Make sure you have your Wi-Fi network name (SSID) and password handy.

Q: Can I use my Mondo+ as a Bluetooth speaker?
A: Yes, you can use your Mondo+ as a Bluetooth speaker to stream audio from your mobile devices. Refer to the user manual for instructions on how to connect and use Bluetooth audio streaming.

Q: How many Mondo+ devices can I use in Multi-Room Mode?
A: You can use multiple Mondo+ devices in Multi-Room Mode. The exact number of devices supported may vary. Refer to the user manual for more information on setting up and using Multi-Room Mode.

Introduction

Mondo+ User Guide

Features

Thank you for purchasing the Grace Digital Mondo+. Your Mondo+ comes with everything you need to enjoy music in your home.
· Easy network set up wizard to connect to a wired or wireless network · Large color display to show station and album artwork · Powerful full room sound with equalizer settings · Set multiple alarms, sleep, and snooze timers on the integrated clock · Save up to 10 favorite presets · Use Wi-Fi 802.11a/b/g/n/ac on 2.4 or 5 ghz networks with WEP and
WPA / WPA2 support
· Integrated internet radio services · Chromecast built-in for audio: listen to 100’s of apps · Bluetooth to stream any audio service not already provided · Aux in for a wired connection to an audio device · UPnP media player to play your saved music on your computer · Multi-room audio via Chromecast built-in or Grace multi-room to stream aux in, UPnP,
Bluetooth audio to every room of your house

Safety and Care Information

IMPORTANT! Always read and understand all the instructions to avoid injury to yourself and/or damage to your device. Grace Digital disclaims all responsibility for damage from data loss due to breakdown, repair, or other causes.
· Do not expose to extreme temperatures (above 140°F or below -4°F, or above 60°C
or below -20°C).
· Do not expose to moisture. Do not use device near or in water.
· Do not let any foreign matter spill into device.
· Do not store in dusty areas.
· Do not expose to chemicals such as benzene and thinners. Do not use liquid or
aerosol cleaners. Clean with a soft damp cloth only.
· Do not expose to direct sunlight for a prolonged period of time, and do not expose to
fire, flame, or other heat sources.
· Do not try to disassemble and/or repair device yourself.
· Do not drop your device or subject it to severe impact.
· Do not place heavy objects on device.
· Do not subject device to excessive pressure.
· If the screen is damaged, do not touch the liquid crystal fluid.

Mondo+ User Guide

Introduction

Safety and Care Information
IMPORTANT! Always read and understand all the instructions to avoid injury to yourself and/or damage to your device. Grace Digital disclaims all responsibility for damage from data loss due to breakdown, repair, or other causes.
· Do not expose to extreme temperatures (above 140°F or below -4°F, or above 60°C
or below -20°C).
· Do not expose to moisture. Do not use device near or in water. · Do not let any foreign matter spill into device. · Do not store in dusty areas. · Do not expose to chemicals such as benzene and thinners. Do not use liquid or
aerosol cleaners. Clean with a soft damp cloth only.
· Do not expose to direct sunlight for a prolonged period of time, and do not expose to
fire, flame, or other heat sources.
· Do not try to disassemble and/or repair device yourself. · Do not drop your device or subject it to severe impact. · Do not place heavy objects on device. · Do not subject device to excessive pressure. · If the screen is damaged, do not touch the liquid crystal fluid.

Introduction

Mondo+ User Guide

WARNING!!
· Opening the case may result in electric shock. · Make sure that you insert the plug all the way into the outlet. · Do not touch the device with wet hands. · Do not install near any heat sources such as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce heat.
· Do not defeat the safety purpose of the polarized or grounding type plug. A polarized
plug has two blades with one wider than the other. When the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
· Protect the power cord from being walked on or pinched particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.
· This product contains chemicals known to the State of California to cause cancer and
birth defects or other reproductive harm.
· This device should be unplugged from the AC outlet during a thunder and lightning
storm, and when the device will not be used for an extended period of time.
· Use the power plug to disconnect the device from the power source. To begin using
the device again, reconnect it to an AC outlet.
· Connect the device to an easily accessible AC outlet, so that the device can be quickly
disconnected, if necessary.

6

Search

Mondo+ User Guide
What’s in the Box?

Introduction

NOW PLAYING
P1
P6
P2
P7
P3
P8
P4
P9
P5
P10
SHIFT

BACK

Mondo+

AC Power Adapter

Remote Control

AAA AAA
2 Remote Batteries

Search

7

Introduction
Mondo+ Controls
Home Button Press to toggle between the Home Menu / Now Playing Screen.
Action Panel Button/Now Playing While at the Now Playing screen, press to learn more about the channel, show, or artist, and for additional selection options, for example, customizing a SiriusXM channel (MyMix).
Context Sensitive Buttons These buttons change their functions according to the context. Press to select the function shown on the display screen just above the button.
BACK Button Press to return to the previously displayed screen.
P1 – P10 Number Buttons Press to tune to a favorite station; press and hold to set the current station as a favorite.
Top View
SNOOZE / sleep timer

Aux In Connection
AUX IN

Rear View

Mondo+ User Guide

Tune Knob (Multifunction) Turning the knob in a menu or user input screen scrolls through and highlights menus and choices; pressing the knob in a menu or user input screen selects the highlighted item.

Front View

NOW PLAYING
P1 P6
P2 P7
P3 P8
P4 P9
P5 P10
SHIFT

BACK

Display Screen

Power/Standby Button Press to turn On/Standby.
Volume / Mute Knob Turn to adjust the volume; press down to mute and un-mute audio.

Sleep / Snooze Button During an alarm press to snooze the alarm for 10 minutes or set snooze time; at the Now Playing screen press to set the sleep timer.

Side View

RCA Line Out Connection

Headphone Connection

Power Connection

USB Connection For external wired Ethernet Adapter, USB thumb drive, or USB hard drive, sold separately.

Mondo+ User Guide
Remote Control
Power/Standby Button Press to turn On/Standby.
EQ, Alarm, Sleep, Snooze
Home Button Press to display the Home screen.
Back Button Press to return back to the previous display screen.
1-10 Number Buttons Press to tune to a favorite station; press and hold to set the current station as a favorite.
Battery Replacement The Remote Control uses two AAA batteries.

Introduction
Mute Button Press to silence the audio.
Play/Pause Button Press to pause or resume playing. (Limited Support)
Vol+/Vol- Buttons Press to increase or decrease the audio volume.
Arrow Buttons Press in a menu or user input screen to scroll through and highlight menu items and choices.
Select Button Press to select highlighted items.

Aux in Button Select Aux in as audio source.

Bluetooth Button Select Bluetooth as audio source.

Search

9

Installation

Mondo+ User Guide

Connect to a Wireless Network

The easiest way to connect to a wireless network is to have the Mondo+ scan for wireless networks, and then choose your wireless network from the list of wireless networks. The Mondo+ will automatically display the strongest Wi-Fi network at the top of the list.
However, if your wireless network name (SSID) is hidden, or if your network is DHCP disabled, you’ll have to manually enter the network settings. Refer to “Manually Connecting to a Wireless Network” on page 11.
Turning the Tune Knob scrolls through menus and lists to highlight items, and pressing the Tune Knob selects a highlighted item.

Easy Connection to a Wireless Network

1. Plug the AC Power Adapter into an AC outlet, and plug the power plug into the connector on the rear of the Mondo+. Press the Power Button if the Mondo+ does not automatically turn on.

2. If the Mondo+ has not previously connected to a wireless network, the Mondo+ will display the Network Wizard screen, with Wireless highlighted. Press the Tune Knob.

Otherwise, press the Home Button, turn the Tune Knob to highlight Setup and press the Tune Knob to select. Turn the Tune Knob to highlight Network Wizard and press Tune Knob to select. Wireless will be highlighted; press Tune Knob to select.

3. At the Wireless screen, Scan will be highlighted. Press the Tune Knob to select.
4. Wait while the Mondo+ scans for wireless networks and then select your wireless network from the list. Turn the Tune Knob to highlight your wireless network and then press the Tune Knob to select.

Wireless
Scan Manual

5. The Mondo+ will attempt to connect to the wireless network. If you chose a network that requires a password, you will be prompted to enter the network password. Password will be highlighted. Press the Tune Knob to begin entering the password. Otherwise, the Mondo+ will attempt to connect to the wireless network.

Scan
Your Wireless Network Some Other Wireless Network Some Other Wireless Network

6. To enter the network password, turn the Tune Knob to highlight each character of the password and press the Tune Knob to select the character. Then enter the next character and continue until you have finished entering the password. If you make an error, press the Delete Button to erase the character. When you have completed entering the network password, press the Enter Button.
7. When the Mondo+ has successfully connected to the wireless network, “Connected successfully” will be displayed.

Your Wireless Network
Password
B a A _

Cancel

Move Left

Enter

Move Right

Delete

Mondo+ User Guide

Installation

Manually Connecting to a Wireless Network (Optional)

To manually connect to a wireless network, you’ll need to know the SSID (wireless network name), password, and type of encryption, and also may need additional information about your wireless network if it is not DHCP enabled:

SSID (wireless network name) Password Encryption (None, WEP, WPA-PSK) IP (Address for the Mondo+) Mask (Network Mask IP Address) Gateway (Gateway IP Address) DNS (Primary Name Server IP Address)

Plug the AC Power Adapter into an AC outlet, and plug the power plug into the connector on the rear of the Mondo+. Press the Power Button if the Mondo+ does not automatically turn on.

8. If the Sound System has not previously connected to a wireless network, the Mondo+ will display the Network Wizard screen, with Wireless highlighted. Press the Tune Knob.

Otherwise, press the Home Button, turn the Tune Knob to highlight “Radio Settings” and press the Tune Knob to select. Turn the Tune Knob to highlight Network Wizard and press Tune Knob to select. Wireless will be highlighted; press Tune Knob to select.

9. At the Wireless screen, Scan will be highlighted. Turn the Tune Knob to highlight Manual and then press the Tune Knob.
10.SSID (wireless network name) will be highlighted. Press the Tune Knob. Enter the SSID by turning the Tune Knob to highlight each character of the SSID and press the Tune Knob to select the character. If you make an error, press the BACK Button to erase the character. When you have completed entering the SSID, press the Enter Button.

Manual
B a A _

SSID

Cancel

Move Left

Enter

Move Right

Delete

11. Turn the Tune Knob and highlight Password. To enter the password, turn the Tune Knob to highlight each character of the password and press the Tune Knob to select the character. If you make an error, press the BACK Button to erase the character. When you have completed entering the password, press the Enter Button.

12. Turn the Tune Knob and highlight Encryption. Turn the Tune Knob to highlight the type of encryption and press the Tune Knob to select.

13. If DHCP is enabled on your wireless network, turn the Tune Knob and highlight DHCP Connect and press the Tune Knob. Skip ahead to step 12.

If DHCP is not enabled on the wireless network, turn the Tune Knob and highlight Static IP and press the Tune Knob.

14. IP will be highlighted. Press the Tune Knob to select. Enter the IP Address. The IP address must be entered in the xxx.xxx.xxx.xxx format. When you have completed entering the IP address, press the Enter Button.

15. Enter the Network Mask in the same way as you entered the IP Address.

Installation

Mondo+ User Guide

16. Enter the Gateway IP Address in the same way.
17. Enter the DNS IP Address in the same way.
18. When all the information has been entered, turn the Tune Knob to highlight Connect and press the Tune Knob.
19. The Mondo+ will attempt to connect to the wireless network, and will display “Connected successfully” if the connection to the wireless network was successful. If the Mondo+ cannot connect to the wireless network, there is likely an error in the information that was entered.

Registering Your Radio To Our Web Portal (Optional)

The radio works perfectly without registering your radio. However, registering your radio allows a few extra features. It allows you to search our internet radio station database online as well as the audiosear.ch podcast database via your computer’s web browser and save your favorite internet radio station and podcast show instantly to your internet radio (this is much easier than searching on the radio itself!). Additionally, our Web Portal allows you to add your favorite radio station or podcast directly to your radio if we don’t already have it in our database.
1. Go to www.myradiosplus.gracedigital.com and click Registration to create an account.
2. In the menu on the left hand of the browser select Radios.
3. In the upper left hand corner select Add New.
4. Enter your radio’s serial number.

NOTE: The serial number required to register your radio is not the serial number on the bottom of the radio. To find your internal serial number please go to your radio’s home menu and select Radio Settings then select Radio Info. On the radio info screen you will see —serial number—‘. The serial number will start withgdi’. Please enter the entire serial number into the web portal including `gdi’ in the serial area then select Save.

Now you can directly save stations on the web site and add stations and podcast directly into the My Stuff folder on your radio.

The My Stuff folder can be found after you click on the Internet radio station icon on your home screen.

To save a Station: On the left hand side of the web portal select Favorites, then select Search
and Save a Station. Then enter in the call sign for the station you want to search for (or just search for a genre or station by location) and when you find a station you want to save to
your radio select Add to Favorites on the right hand side of the resulting station listing(s).

To save a Podcast: On the left hand side of the web portal select Favorites, then select Search and Save a Podcast. Then enter in the podcast name for the podcast you want to search for (or just search for it by the network name or Category) and when you find the podcast you want to save to your radio select Add to Favorites on the right hand side of the resulting station listing(s).

To add a favorite Podcast or Stream that we don’t have in our databases, select Add a Podcast or Add a Stream in the Favorites menu on the web portal and add the source audio URL. If you do not know the source URL (not just the station URL but the actually URL used to stream music) please contact the podcast or station owner directly.

12

Search

Mondo+ User Guide

Using the Mondo+

Home Screen
The Home screen provides access to the different functions of the Mondo+. You can navigate the Home screen by pressing Home, turning the Tune Knob to highlight an item, and pressing the Tune Knob to select.
Select Free and Pay Music Services / Multi-Room

Search and Play Your Favorite Radio Stations
Menu for Network Connection, Bluetooth, Back Light, Clock &
Equalization, etc.

Play Music From a UPnP Media Server / Thumb Drive
Set and Modify an alarm

Play Music From the AUX In Jack

Navigation Basics

Mondo+ User Guide

Power Button

The Power Button turns the Mondo+ on or places it in Standby Mode. Also press to turn an alarm off.

SNOOZE / Sleep Timer Button

Sleep: When the radio is playing, pressing the SNOOZE / Sleep Timer Button then select hours + press the Tune Knob then select minutes and press in Tune Knob.

SNOOZE / sleep timer

Snooze: Pressing the SNOOZE / Sleep Timer Button when a alarm is sounding will set a snooze time of 10 minutes, or you can select the amount of snooze time. To cancel the snooze timer (or cancel an alarm) press the Power Button.

To adjust the Sleep or Snooze time to a time other than 10 minutes, press the SNOOZE / Sleep Timer Button and turn the Tune Knob to adjust the amount of sleep time, hours first,
and then press the Tune Knob to select the hour setting. Do the same for the minutes.

Context Sensitive Buttons (5)
These buttons change their functions according to the context. Press to select the function shown on the display screen just above the button. These buttons are described in this User Guide in the context where they appear.

Tune Knob The Tune Knob is multifunction: you can turn it clockwise or counter-clockwise and press it.

Turn: Turning the Tune Knob at the Now Playing screen displays the Channel Listing screen. When in menus or user input screens, turning the Tune Knob scrolls through and highlights menu items and choices.

Volume Knob
Turning the Volume Knob clockwise or counter-clockwise increases or decreases the volume of the audio. Pressing the Tune Knob mutes and un-mutes the audio.

Presets P1 – P10

The Presets are used to store favorite channels in the button location by

P1

P5

pressing and holding the button. Then you can tune a favorite channel just by

P6

P10

pressing the button. Pressing SHIFT allows you to program 6-10 presets.

The radio currently can only save presets of content found directly on the Mondo+. It cannot save Bluetooth®, UPnP, Aux In, Chromecast as favorites.

BACK Button

The BACK Button returns back to the previously displayed screen or Home Screen.

BACK

Home Button
Pressing the Home Button displays the Home screen showing the listening modes and configuration options for the Sound System.

Now Playing Button

Press to display the Now Playing Screen. Press and hold when using the SiriusXM app

NOW

PLAYING

for advanced features.

14

Search

Mondo+ User Guide

Chromecast built-in

Using Chromecast built-in is as simple as pressing a button from your favorite app. Listen to your top tunes while taking a phone call or sending a text, all without interrupting what’s playing on the Mondo+. With Chromecast built-in, your phone is your personalized remote control that you can use to browse, play, pause, and even make playlists. And you don’t have to learn anything new! You can stream from Android tablets and smartphones, iPhones, iPads, Mac, Windows, and Chromebooks to the Mondo+.
Before You Begin Streaming to the Mondo+
In order to stream to the Mondo+, it must be on the same local network as the device (smartphone, tablet, laptop, PC etc.) that you will stream from. Please see the previous installation section in this manual on how to connect to a wireless network. Once your Mondo+ is connected to the network there is no additional set up required on the Mondo+ to enable Chromecast built-in.
In order to insure the best experience, please make sure you are running the latest version of the Chromecast-enabled app on your smartphone / tablet etc. You can always double check that you are on the latest version by visiting the Google Play Store or Apple App Store and checking for any app updates.
Stream from Chromecast-Enabled Apps to Your Audio Device
To stream from your mobile device or tablet to the Mondo+:
1. Open a Chromecast-enabled app.
2. In the top right or bottom right corner, tap the Cast button .
3. Choose the Mondo+. The Cast button will become filled, letting you know you’re connected.
4. Once you are connected, you can stream music, radio stations, and podcasts directly to the Mondo+.
Multi-Room Playback: How to Create an Audio Group
Multi-room playback allows you to stream the same music to several speakers at the same time. You can use this feature to enjoy your music all around your home. Once you’ve created your group, your favorite music and audio from Chromecast-enabled apps are instantly available to stream.
Create an Audio Group:
1. From your iPhone or Android device, open the Google Home app.
2. In the upper right corner of the home screen, tap Devices to see your available Chromecast Audio or speaker with Chromecast built-in. In this area you will see the Mondo+.
NOTE: you can also change the name of the Mondo+ in the Mondo+ settings menu. This will allow you to change the name to Kitchen, Den, Bedroom, or any name you want.
3. In the top right corner of the Mondo+, that you would like to set up in a group, tap the device card menu > Create Group.
15

Search

Chromecast built-in

Mondo+ User Guide

4. The default name of the group is “Home group”. To rename the group, erase the name and type in something new.
5. You will now see the Mondo+, a list of all available speakers, including Google Home, if available.
6. To add or remove a Mondo+ from the group, tap the box next to its name. A check will appear in the box next to the speaker’s name to indicate whether it will be associated with the group.
NOTE: At least two devices must be selected to create a group.
7. Tap Save.
8. After the Mondo+ has been successfully added to the group, you will see the group device card within Devices .
NOTE: It may take up to 5-10 seconds for the group device card to appear in the Google Home app. Tap Speakers in Group to see which speakers are associated with the group.
NOTE: Multi-room group creation functionality is only available on iOS and Android. This feature is not supported from the Chrome browser. However, you can still stream to a group from Chrome.
For additional tips and troubleshooting please view the Google Home app or Google support at https://support.google.com/chromecastbuiltin
Play Audio on the Mondo+ from Google Home
Initiate and control audio to the Mondo+ with Chromecast built-in — using only your voice. Please follow the previous steps in the previous Chromecast section of the menu.
1. Set up your Google Home if it’s not set up yet. 2. Open the Google Home app. 3. In the top left corner of the Home screen, tap Menu . 4. Verify that the Google Account that is listed is the one you used to set up Google Home.
To switch accounts, click the triangle to the right of the account name. 5. Make sure your Mondo+ is set up and on the same Wi-Fi network as Google Home. 6. Tap More settings > TVs and Speakers > . You’ll see a list of all your linked devices. 7. To link a new Mondo+, tap the plus sign in the bottom right corner of the screen. 8. The Google Home app will search for voice supports speakers on the same Wi-Fi network
as your Google Home.
NOTE: You may see a list of devices that aren’t voice-supported. These can’t currently be linked to your Google Home, but they’ll be available soon.
9. To add a device, tap the checkbox to the right of the device name. You can check multiple devices. Tap Add.

16

Search

Mondo+ User Guide

Chromecast built-in

10. You will now see all your devices within the TVs and speakers section of the Google Home app.
NOTE: If you receive an “Error when linking device” error message, you must Factory Data Reset (FDR) your Chromecast Audio device.
To unlink a device: 1. In the top right corner of the Home screen, tap Devices . 2. Scroll to the bottom and tap Linked Devices. 3. Tap the ‘X’ next to the device you want to unlink.
Play Audio on the Mondo+ from Google Home

To do this . . .

Say “Ok Google” then say . . .

Request a song

· Play on · Play by on

· Play on on

Request an artist

· Play on · Play on on

Request an album

· Play on · Play by on

· Play by on on

Play music based on genre/ mood/activity

· Play classical music on · Play happy music on · Play music for cooking on · Play on on

Play personalized suggested content from chosen service

· Play some music on · Play music on on

Play music on your speakers, TV, ·

or video device.

·

Play music on my living room TV Play on my bedroom speakers

NOTE: Device linking is required.

Pause

· Pause · Pause the music

Resume

· Resume · Continue playing

Stop

· Stop · Stop the music

Play next song

· Next · Skip · Next song

What’s playing

· What’s playing? · What song is playing? · What artist is playing?

Control Volume

· Set volume to 5 · Set volume to 40%

Search

Chromecast is a trademark of Google Inc.
17

Music Services

Mondo+ User Guide

In addition to being able to play music via Chromecast enabled apps, you can also play music via Bluetooth, USB drives, UPnP media players, the aux in jack, as well as the music services directly on the radio.
To play a music service on the radio, you can select the appropriate music service or Grace Digital radio service by using the front panel controls, the infra-red remote control, or the free android or iPhone apps.
The music services currently available on the radio are: CBS radio (radio.com), BBC, NPR, iHeartRadio (basic stations only, for advanced features please use the Chromecast enabled app), SiriusXM (A SiriusXM Streaming Subscription is required and sold separately by SiriusXM. See SiriusXM Customer Agreement at siriusxm.com for details.)

Bluetooth
The Mondo+ can work as a Bluetooth speaker. When you power the Mondo+ on for the first time the Mondo+ will automatically be available to connect. If it is not showing up on your smartphone, go into the Mondo+ main `radio settings’ menu, select Bluetooth. If the menu item Bluetooth Pairing Mode is displayed on the radio, then you should see it on your smart device. Once you select the Mondo+ in your smart device the radio will now show the name of the smartphone / tablet that it is paired too.
Now on your smart device simply press play on the music that you want to stream via Bluetooth and the music will start playing on the Mondo+. After your initial set up, the next time you want to play Bluetooth you will have to select the device from the Mondo+ menu.
For example, if you are playing Bluetooth music from your smartphone and you then later press the preset 1 on the Mondo+ to play your previously saved radio station. To play Bluetooth music again you will have to select your device from the Mondo+ Bluetooth menu. After you select your device you will be shown 3 options:
Play: If you want to play the music.
Disconnect: If you want to stop playing music but keep the smartphone device in the Mondo+ memory. By doing this, it will release your smartphone from playing music but if you later press play on the Mondo+, assuming your device is still in range, pressing play on the Mondo+ will start playing music from your device again.
Unpair: Will disconnect the Mondo+ and place the Mondo+ into pairing mode to be paired to another phone.
NOTE: If you unpair your smart device and then want to pair back to the Mondo+ again, depending on the smart device you may have to delete the Mondo+ name out of your device’s Bluetooth list, or turn Bluetooth on and off on your smart device. Then the Mondo+ will display again and you can repair, connect, and start playing.

Aux In
You can listen to another device such as an MP3 player or Smartphone by plugging it into the Aux In connection on the Mondo+.
To listen using Aux In:
1. Connect a device to the Aux In connection on the Mondo+. 2. Press Home and turn the Tune Knob to highlight Aux In. Press the Tune Knob to select.
To exit Aux In:
1. Press the Exit Aux In Button.

18

Search

Mondo+ User Guide

Music Services

Playing Music from a USB Thumb Drive
Insert your USB thumb drive into the Mondo+ and on the radio menu select Media Player then select USB.
NOTE: USB sticks must be formatted in one of the following protocols: FAT, FAT32, NTFS, ext2, ext3 or ext4.
Playing Music from a USB Hard Drive
Connect your USB hard drive to the Mondo+. If your drive requires more power, you may want to use a USB powered hub in between the Mondo+ and the USB hard drive, then select Media Player,’ then selectUSB,’ then you will be able to navigate and play your music using the Tune Knob.

UPnP Media Servers
The Mondo+ will play music from network connected UPnP or DNLA media servers. You must first make sure that the media server is on the same network as the Mondo+, then select Media Player,’ then selectUPnP,’ then select your device and you will be able to navigate and play your music using the Tune Knob.
NOTE: The Mondo+ is a media player and renderer. This means that the features and functionality are driven by your media player software. To optimize the performance, keep your media player folder size to a manageable size. The larger the folder size, the longer it takes the Mondo+ to display the folder content and scroll through them.
Additionally, check the product specifications section of the manual to see the supported protocols pages 43-46. If you have a mixture of supported and unsupported formats in a folder on your media server, depending on your software, the radio will be able to see all, some, or none of the folders. So, it is always best to make sure the folder you want the Mondo+ to access only has supported formats /bit rates etc.

Spotify Connect
The Grace Mondo has Spotify Connect built in. Spotify Connect lets you control the music playing on the Mondo+. Using the Spotify app on your mobile, tablet or PC. Learn more at Spotify.com/connect
How to use Spotify Connect:
You’ll need Spotify Premium to use Connect. Learn more at Spotify.com/premium. Follow the steps below:
1. Add your speakers to your Wi-Fi network (see page 10). 2. Fire up the Spotify app on your phone, tablet or PC using the same Wi-Fi network as
the Mondo+. 3. Play a song on Spotify and hit `DEVICES AVAILABLE’. 4. Choose your speakers and your music will start playing out loud on the Mondo+.
Happy listening.

Licenses: The Spotify Software is subject to third party licenses found here: https://developer.spotify.com/esdk-third-party-licenses/

Search

19

Multi-Room Mode

Mondo+ User Guide

To play the same Chromecast built-in audio to multiple Mondo+’s please see the Chromecast built-in section.
To play the same audio (other than Chromecast built-in audio) on multiple Mondo+’s in your home or office you can create groups using the free Grace Controller apps for Android or iPhone. Please download the Grace controller apps at Google Play or the Apple app store and follow the instructions on the respective apps.
The Grace Controller app will allow you to stream any audio source including Bluetooth, aux in, Media Players, USB media (except Chromecast built-in audio) simultaneously to groups of Mondo+’s.
Additionally, on the radio, via the music services folder, you can select any other Mondo+ on your network and the Mondo+ will start playing the same audio that is currently playing on the selected radio (except Chromecast built-in audio).
For example: If you have your Mondo+ in your bedroom playing K-rock, and you want to play the same music on your Mondo+ in your kitchen, on your Kitchen Mondo+ select the music services icon and scroll to the bottom of the menu and select multi-room. In that menu you will see the list of other Mondo+ in your home. Select your bedroom radio and now both your bedroom radio and your kitchen radio will be paying K-rock synchronized.
To simplify your whole home experience you can change the name of your Mondo+ to any name you want such as kitchen, bedroom, den etc. To change the name of your Mondo+ go into the radio settings menu and select `radio Info, then highlight and select device name. Change the name to what you want then select enter to save the new name. This new name will also display as the name for Bluetooth, Wi-Fi and Chromecast built-in connections.

20

Search

Mondo+ User Guide

Radio Settings

Clock and Alarms
Clock set-up option has several selections:
24-hour time: This option sets the time format to a 12 or 24 hour format. Alarm: The Mondo+ has five alarm clocks, each of which can be configured differently. Refer to “Setting Alarm Clock” on page 22 for information about the alarm clock. Timezone: This option sets the Mondo+ to the timezone for your area. To enable or disable 24-hour time:
1. Press the Home Button and turn the Tune Knob to highlight Radio Settings. Press the Tune Knob to select.
2. Turn the Tune Knob to highlight Clock and Alarms and press the Tune Knob to select.
3. Turn the Tune Knob and highlight 24-hour time.
4. Press the Tune Knob to enable 24-hour time (when the box has a checkmark in it), or disable (when the box does not have a checkmark in it).
To select the Timezone:
1. Press the Home Button and turn the Tune Knob to highlight Radio Settings. Press the Tune Knob to select.
2. Turn the Tune Knob to highlight Clock and Alarms and press the Tune Knob to select.
3. Turn the Tune Knob to highlight a timezone and press the Tune Knob to select. A checkmark in the box next to the timezone indicates the selected timezone.

Search

21

Radio Settings

Mondo+ User Guide

Setting Alarm Clock

The Mondo+ has five alarm clocks, each of which can be configured independently.

To Add or Modify an alarm:
1. Highlight Alarm on the Home Screen and press the Tune Knob.
2. To add an alarm, press the Add Alarm Button, or to modify an alarm, turn the Tune Knob to highlight an alarm and press the Modify Alarm Button.
3. Each alarm has configuration options which are summarized in the following table. Turn the Tune Knob to highlight a configuration option and press it to select. Then turn the Tune Knob to change a setting and press it to confirm the setting.

Alarm Time Repeat
Alarm Channel Volume

12:00 AM – 11:59 PM
One Time, Everyday, Weekly, Weekdays, Weekends, Sunday, Monday, Tuesday, Wednesday, Thursday, Friday, or Saturday Buzzer, or choose a channel
Variable

Turn the Tune Knob to adjust the hour setting and press the Tune Knob to select. Turn the Tune Knob to adjust the minutes setting and press the Tune Knob to select. Turn the Tune Knob to highlight the frequency of the alarm and press the Tune Knob to select.
Turn the Tune Knob to highlight what you want to wake up to, and press the Tune Knob to select. Turn the Tune Knob to adjust the volume of the alarm and press the Tune Knob to select.

4. When you finish configuring the alarm, turn the Tune Knob to highlight Save changes and press the Tune Knob. An advisory message will be displayed confirming the action selected. When the radio is in standby and you want to modify an alarm without turning it on, briefly pressing the Home Button to access the Alarm menu.

To Enable, Disable, or Remove alarms:
1. On the Home Screen select Radio Settings and press the Tune Knob. Turn the Tune Knob to highlight Clock and Alarms and press the Tune Knob. Turn the Tune Knob to highlight Alarms and press the Tune Knob.
2. Turn the Tune Knob to highlight an alarm from the list and press the Enable Alarm, Disable Alarm, or Remove Alarm Button. An advisory message will be displayed confirming the action selected.

To Cancel an alarm:

An upcoming alarm can be cancelled so that it does not sound. If the cancelled alarm has been configured as a repeating alarm, it will be reset to sound at the following scheduled time.
1. Press and hold the Home Button when in Standby Mode for 2 seconds.
The alarm icon will be removed from the display screen temporarily until after the scheduled time of the alarm has passed. This function only cancels the upcoming alarm, it does not disable an alarm series.

22

Search

Mondo+ User Guide

Radio Settings

Snooze Timer
When the alarm sounds, pressing the SNOOZE / Sleep Timer Button will silence the alarm for 10 minutes, or you can select a custom amount of time. After the snooze time elapses, the alarm will sound again.
To Snooze:
1. When the alarm clock is sounding, press the SNOOZE / Sleep Timer Button on the top of the Mondo+ once to select the default snooze time of 10 minutes. To select a longer snooze time, press the SNOOZE / Sleep Timer Button again to increase the time by 10 minutes. Each time the button is pressed the snooze time is increased by an additional 10 minutes.
2. Alternately you can also select a custom amount of snooze time. Press the SNOOZE / Sleep Timer Button and turn the Tune Knob to configure the amount of time, hours first and then minutes. Turn the Tune Knob to select the time and press the Tune Knob to confirm.
Sleep Timer
The sleep timer automatically turns the Mondo+ off after a period of time as you fall asleep. The period of time can be set up to 24 hours.
To turn the Sleep Timer On:
1. When the Mondo+ is on, press the SNOOZE / Sleep Timer Button on the top of the Mondo+ once to select the default sleep time of 10 minutes. To select a longer time, press the SNOOZE / Sleep Timer Button again to increase the time by 10 minutes. Each time the button is pressed the sleep time is increased by an additional 10 minutes.
2. Alternately you can also select a custom amount of sleep time. Press the SNOOZE / Sleep Timer Button and turn the Tune Knob to configure the amount of time, hours first and then minutes. Turn the Tune Knob to select the time and press the Tune Knob to confirm.
To cancel the Sleep Timer:
1. To cancel the sleep timer, press the SNOOZE / Sleep Timer Button, or press the Power Button. The advisory message Sleep timer deactivated will be displayed.

Search

23

Advanced Features Equalization Settings

Mondo+ User Guide

You can adjust the equalization of the Mondo+ (EQ) to adjust for room acoustics and your listening preferences. You can adjust bass and treble, or you can select a profile such as Rock, Jazz, etc.
To change Equalization:
If you want to change the treble or bass, do the following:
1. Press Home, then select Radio Settings, then turn the Tune Knob to highlight Equalization. Press the Tune Knob to select.
2. Turn the Tune Knob to highlight either Treble or Bass and press the Tune Knob to select.
3. Turn the Tune Knob to adjust the equalization and press the Tune Knob to select the setting.
If you want to select an equalization profile, do the following:
1. Press Home, then select Radio Settings, then turn the Tune Knob to highlight Equalization. Press the Tune Knob to select.
2. Turn the Tune Knob to highlight Profile and press the Tune Knob to select.
3. Turn the Tune Knob to highlight a profile and press the Tune Knob to select the profile.

24

Search

Mondo+ User Guide

Advanced Features

Increase Battery Life
Press the Power Button to turn on the Mondo+ and put it into Standby Mode. When in Standby Mode, the radio’s infra-red and Wi-Fi transceivers are still operable. This allows the radio to be automatically turned on by the remote or Chromecast built-in stream.
When using a Mondo+ with a battery and not plugging it back into AC power when in standby, go into the Radio Settings menu and Select Increase Battery Life. This will turn WiFi off when the radio is in Standby Mode. The radio will not respond to the remote control or remote control app and will manually reconnect to your Wi-Fi when turned back on.
Deep Sleep Mode and Battery Usage
To place the radio into Deep Sleep mode, press the radio’s or remote’s Power Button for 3-4 seconds. To get out of Deep Sleep mode press the Power Button for 1-2 seconds. It will take the radio about 1 minute to completely power back on to be ready to play.
In Deep Sleep mode all functions are disabled including the alarm, remote, Wi- Fi, Ethernet, and Bluetooth connections. This reduces power consumption and is especially helpful when utilizing the Optional battery (sold separately). Since all operations are turned off you will not be able to see the radio on your network or turn it back on with the infrared remote control. For typical daily use Deep Sleep mode is not suggested or needed.
Presets, settings, and passwords are saved even in deep sleep mode, and during power outages.
Master Power Off
In order to completely turn your radio off, without having to remove your battery or unplug the power cable please select Master Power Off. This will completely turn the radio off. All your settings, password, presets will remain saved in this mode. To delete all settings refer to Factory Reset on page 27.
Buffer Size
The radio buffer is optimized for a typical network. If your Wi-Fi environment is very noisy (example: apartment complex), or the station you are listening to has little bandwidth, select medium or large buffer size. This will slightly delay the initial start of play when 1st selecting a channel but will minimize periodic audio stops due to congestion or interference.

Search

25

Advanced Features

Mondo+ User Guide

Network Info
Network Info displays the details of the current network configuration of the Mondo+. The MAC address of the Mondo+ can be found in the network info.
1. Press the Home Button and turn the Tune Knob to highlight Radio Settings. Press the Tune Knob to select.
2. Turn the Tune Knob and highlight Network Info and press the Tune Knob to select.
3. The current network configuration will be displayed. Turn the Tune Knob to scroll through the configuration details.
Firmware Update
Grace Digital may occasionally update the software for the Mondo+ and it is recommended that you always update the software when new software becomes available. The Mondo+ will automatically check for software updates when you turn it on, but you also can manually check for any available software updates.
1. Press the Home Button and turn the Tune Knob to highlight Setup. Press the Tune Knob to select.
2. Turn the Tune Knob to highlight Firmware Update and press the Tune Knob to select.
3. If the Mondo+ has already detected that a software update is available, it will show a software update available.
If not, the Mondo+ will check for a software update. If no update is available, the Mondo+ will display “No new updates”.
4. If a software update is available, turn the Tune Knob to highlight Install update and press the Tune Knob to select.
5. The software update will be applied to the Mondo+. Do not turn the Mondo+ off during the update, or disconnect the Mondo+ power. When complete, the Mondo+ will restart to complete the update, and display “Please press the POWER button”.
Radio Info/Change Radio Name
The Info option displays information about the Mondo+ serial number and software version.
1. Press the Home Button and turn the Tune Knob to highlight Radio Settings. Press the Tune Knob to select.
2. Turn the Tune Knob to highlight Info and press the Tune Knob to select. The information will be displayed.
You can change the name of your radio by selecting Radio Info then highlight and select Device Name. The new name will now show up in Chromecast enabled apps, used for the Google assistant, and broadcast via Bluetooth.

26

Search

Mondo+ User Guide

Advanced Features

Factory Reset
The Factory Reset option restores the Mondo+ to the factory settings. It will erase all the stored network settings, SiriusXM streaming username and password, presets, alarm clock settings, and set all other options back to the factory settings.
1. Press the Home Button and turn the Tune Knob to highlight Radio Settings. Press the Tune Knob to select.
2. Turn the Tune Knob to highlight Factory reset and press the Tune Knob to select.
3. Confirm that you really want to proceed with the factory reset. Confirm factory reset will be highlighted. Press the Tune Knob to proceed with the factory reset, or press the BACK Button to abort the factory reset.
4. The screen will display “Restoring factory defaults”, restart the Mondo+ when complete and display “Please press the POWER button”.
NOTE: You will have to connect the Mondo+ to a network (see “Connect to a Wireless Network”).
Display Brightness
There are three different brightness backlight settings, and each type of backlighting can be set to a brightness from 0 to 19.
Active: This setting controls the brightness of the display screen when the Mondo+ is On, and you are interacting with the Mondo+ by pressing buttons, etc. After 30 seconds of inactivity, the display changes to the inactive setting.
Inactive: This setting controls the brightness of the display screen when the Mondo+ is On, but you have not interacted with the Mondo+ by pressing buttons, etc., for 30 seconds. You might use this setting to set the brightness when in a darkened room as you are falling asleep while listening to the Mondo+.
Standby: This setting controls the brightness of the display screen when the Mondo+ is in Standby Mode.
To set the Display Brightness:
1. Press the Home Button and turn the Tune Knob to highlight Radio Settings. Press the Tune Knob to select.
2. Turn the Tune Knob to highlight Display Brightness and press the Tune Knob to select.
3. Turn the Tune Knob and highlight Active, Inactive, or Standby and press the Tune Knob to select.
4. Turn the Tune Knob to the desired setting, 0 to 19 and press the Tune Knob to select your setting.
Optionally – When the radio is in Standby Mode, you can rotate the Tune Knob to temporarily change the standby backlight brightness. This is perfect to make the display 100% dark while sleeping, or brighter to see the clock.

Search

27

Troubleshooting

Mondo+ User Guide

Your Mondo+ has been designed and built to be trouble-free but if you experience a problem, here’s some troubleshooting hints.

If you see this on the screen: Initializing Network Connecting to <wireless network> Error loading menu
Buffering
Updating Not Connected to the Internet Retrying

Try this:
· The Mondo+ is attempting to connect to your network. If this message is displayed more than one minute, make sure your network is connected to the Internet.
To verify that you have an Internet connection, refer to “Software Update” on page 37 and follow the procedure. If you receive the message No Update Available, or New version available, then the Radio is connected to the Internet. If you get the message, Login failed, then you don’t have an Internet connection. Check with your network administrator for Internet connectivity on your network.
· Turn the Mondo+ Off and On again.
· The Mondo+ is loading the channel information. If this message is displayed for more than one minute, make sure your connection to the Internet has not been interrupted. See Connecting (previous troubleshooting item) and verify your Internet connection.
· Turn the Mondo+ Off and On again.
· Your Mondo+ is installing a software update. Do not turn the Mondo+ off or disconnect the power. Allow the software update to complete.
· The wireless network information you entered is incorrect. Verify and re- enter the information.
· You have entered an incorrect password for a secure wireless network. Verify and re-enter the information.
· If you have manually configured a network connection, you have entered one or more incorrect settings. Verify and re-enter the information.

If this happens: You do not receive the same Sirius or XM channels you receive on your Satellite Radio
The Scan for Network feature fails before the Mondo+ connects to your network The Scan for Network feature does not find your wireless network

Try this:
· SiriusXM streaming does not have all of the same channels as the Sirius or XM satellite service.
Check siriusxm.com/channellineup for the latest SiriusXM streaming channel lineup.
· Your network has DHCP disabled. You’ll have to manually configure your network connection. Refer to “Manually Connecting to a Wireless Network” on page 10.
· Your wireless network has a hidden name (SSID). If so, you will have to manually configure your wireless network connection. Refer to “Manually Connecting to a Wireless Network” on page 10.
· The wireless signal from your access point is too low. Try moving the Mondo+ closer to your access point and see if the Scan for Network feature finds your wireless network.

28

Search

Mondo+ User Guide
Appendix
Listening to SiriusXM

Search

29

Listening to SiriusXM

Mondo+ User Guide

Now Playing Screen
The Now Playing screen provides details about the currently playing song, show, or game.

Clock
Channel Logo Artist Name
or Talk Show Host or Sports Teams/Score
Song/Program Title or Talk Show Schedule or Game Time/Game Details
Start Show Now

Play/Pause/Stop/Busy

Alarm Clock On

Audio/Mute

11:05 AM

WiFi Signal Strength (or Wired Connection)

Kenny Chesney American Kids

Album Art

Start Now

Go to Live
Rewind Play/ FastPause Forward

Return to Live Broadcast

Viewing and tuning Channels By Category
Channels are organized into categories to make it easier for you to find the ones that suit your taste.
1. While in the SiriusXM app.
2. Turn the Tune Knob to highlight Categories and press the Tune Knob to select.
3. Turn the Tune Knob to highlight a category and press the Tune Knob to select the category.
4. Turn the Tune Knob to scroll through the channels in the category. Press the Tune Knob to select a channel.

Categories
All Channels All Channels (A-Z) Pop Rock Hip-Hop
Favorite Shows On Demand

Pop

002 SiriusXM Hits 1
The Chainsmokers/Halsey – Closer
003 Venus
Casada – Evacuate The Dancefloor
004 Pitbull’s Globalization
@DJDAWN – #Globalization
005 50s on 5
Sam Cooke – Everybody Loves to CHa Cha Cha (59)
006 60s on 6
Rolling Stones – She’s A Rainbow (67)

Categories Favorite Shows On Demand

Play MyMix

30

Search

Mondo+ User Guide

Listening to SiriusXM

Viewing and Tuning Channels in a List

Channels can be tuned from a list of all available channels, “All Channels”.

1. While in the SiriusXM app.
2. Turn the Tune Knob to highlight Categories and press the Tune Knob to select.
3. Press the Tune Knob to highlight All Channels and press the Tune Knob.
4. Turn the Tune Knob to browse through the channels, and highlight a channel and press the Tune Knob to tune the channel. The Mondo+ will tune to the channel.
TIP! Go to siriusxm.com/channellineup for the latest SiriusXM channel lineup.
Start Now
You can tune to a show that aired in the past 5 hours on a channel by using the Start Now Button when at the Now Playing screen.

Categories
All Channels All Channels (A-Z) Pop Rock Hip-Hop
Favorite Shows On Demand

All Channels



002 SiriusXM Hits 1 The Chainsmokers/Halsey – Closer  
003 Venus Casada – Evacuate The Dancefloor  
004 Pitbull’s Globalization @DJDAWN – #Globalization  
005 50s on 5 Sam Cooke – Everybody Loves to CHa Cha Cha (59)

Categories Favorite Shows On Demand

Play MyMix

1\. At the Now Playing screen, press the Start Now Button.

2\. Turn the Tune Knob to highlight a show in the list and press the Tune Knob
to begin playing the show.

Start Now  
Healthy Aging 2016/10/18 Time 02:00:00  
Rehabilitative Medicine 2016/10/18 Time 04:00:00  
Pulmonaolgy 2016/10/18 Time 06:00:00  
Everyday Health 2016/10/18 Time 08:00:00

> [Search](https://manual-hub.com/)

31

Listening to SiriusXM

Mondo+ User Guide

Presets

You can assign up to 10 of your favorite channels to the preset buttons (P1 –
P10), so you can easily tune them. Presets can be either channels, or channels
you have personalized for MyMix.

To assign a favorite channel to a Preset Button:

11:05 AM

1\. Tune to the channel you want to save as a preset.

Info

2\. Press and hold a Number Button (P1 – P10) to assign the custom channel as
a preset to that button.

Channel Saved to Preset 1  
Kenny Chesney American Kids

IMPORTANT! If the button you choose already has a

preset channel assigned to it, the number button will Start Now

Go to Live

be replaced with the new preset channel.

To tune a Preset channel:  
1\. Press the Number Button (P1 – P10) that is assigned to the Preset channel.
The Mondo+ will tune to the channel.

32

> [Search](https://manual-hub.com/)

Mondo+ User Guide

Listening to MyMix

MyMix Now Playing Screen  
You can personalize your listening preferences for many music and comedy
channels, to hear more of the type of music you prefer. Channels which can be
personalized have the MyMix icon displayed in the channel list.

Clock  
Channel Logo Artist Name  
or Talk Show Host or Sports Teams/Score  
Song/Program Title or Talk Show Schedule or Game Time/Game Details  
Start Show Now

Play/Pause/Stop/Busy Alarm Clock On  
11:05 AM

Audio/Mute WiFi Signal Strength (or Wired Connection)

MyMix is playing

Jimmy Buffett

Album Art

0:00:45 Start Now

0:02:11

Go to Live

Rewind Play/ FastPause Forward

Song/Comedy Timeline Exit MyMix and return to Live Broadcast

You can personalize your listening experience by adjusting the parameters of a
channel’s genre. The parameters will vary from channel to channel.

> [Search](https://manual-hub.com/)

33

Listening to MyMix

Mondo+ User Guide

Personalizing a Channel for MyMix

1\. Tune to the channel which you want to personalize for MyMix and press the
Now Playing Button.

2\. Press the Play MyMix Button.  
3\. Turn the Tune Knob to highlight a personalization setting and press the
Tune Knob to select the setting. Then turn the Tune Knob to adjust the
setting. Press the Tune Knob again to confirm the setting.  
4\. If you do not want to hear DJ talk, select the Music Only checkbox by
tuning the Tune Knob to highlight Music Only and press the Tune Knob to
select. (“Music Only” will also remove DJ talk on the comedy channels.)

Edit MyMix  
A Lot Less Familiar  
A Lot More Mainland  
A Lot Less Buffett  
Music Only  
Cancel

Familiarity Sound Style

A Lot More Familiar A Lot More Beaches  
A Lot More Buffett

Play MyMix

11:05 AM

5\. When you have finished adjusting the MyMix personalization settings, press
the Play MyMix Button.

6\. MyMix will now play the channel personalized according Jimmy Buffett

to your preference. A MyMix icon is displayed directly

to the right of the channel logo indicating that you are

0:00:45

0:02:11

Start Now

listening to MyMix. If you wish to exit MyMix, press the

Go to Live Button.

Go to Live

Tuning to a MyMix Channel

Once you have personalized a channel for MyMix, you can tune to the MyMix
channel.

1\. While in SiriusXM app.  
2\. Turn the Tune Knob to highlight Categories and press the Tune Knob to
select.  
3\. Press the Tune Knob to select All Channels or turn the Tune Knob to the
category desired and press the Tune Knob to select.  
4\. Turn the Tune Knob to browse through the channels. Channels which you have
personalized for MyMix will show the MyMix icon enabled (bright). Turn the
Tune Knob to highlight a channel and press the Play MyMix Button.

All Channels

~~~ Pop ~~~

002 SiriusXM Hits 1 The Chainsmokers/Halsey – Closer  
003 Venus Casada – Evacuate The Dancefloor  
004 Pitbull’s Globalization @DJDAWN – #Globalization  
005 50s on 5 Sam Cooke – Everybody Loves to CHa Cha Cha (59)

Categories Favorite Shows On Demand

Play MyMix

11:05 AM

5\. If you are already tuned to a channel which has been personalized for
MyMix, you can tune to the MyMix channel by pressing the Now Playing Button
and then pressing the Play MyMix Button.

Jimmy Buffett

0:00:45 Start Now

0:02:11

Go to Live

6\. The MyMix channel will be tuned and the MyMix icon displayed directly to
the right of the channel logo to indicate the MyMix channel is playing.

As songs play from the MyMix channel, a timebar is displayed. You can press
the Pause/Play Button to pause, and Rewind and Fast Forward Buttons rewind or
advance.

34

> [Search](https://manual-hub.com/)

Mondo+ User Guide

Listening to MyMix

Ending MyMix  
When the a MyMix channel is playing, you can end MyMix and return to live
SiriusXM without changing the channel.  
1\. When listening to a MyMix channel, press the Go to Live Button. The
channel will be tuned live, and the MyMix icon will no longer be displayed on
the Now Playing screen.  
Editing a MyMix Channel  
You can change the personalization settings of a MyMix channel that had
previously been personalized for MyMix.  
1\. Tune to the MyMix channel, or tune to the channel which has been
personalized for MyMix.  
2\. Press the Now Playing Button and press the Edit MyMix Button. 3. Adjust
the MyMix personalization settings and then press the Play MyMix Button to
save  
the settings and play the MyMix channel.

> [Search](https://manual-hub.com/)

35

Listening to On Demand

Mondo+ User Guide

On Demand Now Playing Screen

On Demand allows you to listen to shows which have aired previously on
SiriusXM or are currently playing.

Clock

Play/Pause/Stop/Busy Alarm Clock On  
11:05 AM

Audio/Mute WiFi Signal Strength (or Wired Connection)

Channel Logo

Artist Name or Talk Show Host or Sports Teams/Score Today Radio

Song/Program Title Today Show or Talk Show Schedule

or Game Time/Game Details 0:00:12

2:37:17

On Demand is playing Album Art Replay Timeline

Rewind Play/ FastPause Forward  
Listening to On Demand Shows

On Demand shows can be found by several search methods.  
1\. While in the SiriusXM app.  
2\. Either turn the Tune Knob to highlight On Demand and press the Tune Knob,
or turn the Tune Knob to highlight Categories and press the On Demand Button.  
3\. Next select the method by which to search for shows. Turn the Tune Knob to
highlight a search selection and press the Tune Knob to select. All Shows:
These are all available shows listed by channel number. Favorites: These are
shows which you have saved as favorite shows. Shows by Category (Pop, Rock,
Etc.): These are all shows in a category, listed by channel number.  
4\. Once you have searched for and located a show, you can select a show
episode from the show list. Turn the Tune Knob to highlight a show in the list
and press the Tune Knob.  
5\. If you have selected a show from the list which has more than one episode,
select an episode by turning the Tune Knob to highlight a show episode. Press
the Tune Knob to listen to the show episode, or press the BACK Button to
return to the show list.

On demand  
All Shows Favorites Pop Rock Hip-Hop  
All Shows  
~~~ 105 EW Radio ~~~ Women on Pop Westworld Analysis Mode The Jess Cagle
Interview Superhero Insider  
Add To Favorites  
SiriusXM’s Town … 22 Jump Street Special, Exp: 1612 Days Aaron Sorkin Special,
Exp: 1612 Days Bridget Jones’s Baby Special, Exp: 1794 Days Bryan Cranston
Special, Exp: 1729 Days Cast of “Entourage” Special, Exp: 1612 Days  
Add To Favorites

6\. The circles show at the right of each show denote whether the show episode
has been listened to or not. Empty circles denote the show episode has not
been listened to, a half filled circle denotes the show episode has been
partially listened to, while a filled circle denotes the show episode has been
listened to in its entirety.

Mondo+ User Guide

Listening to On Demand

Adding an On Demand Show to Favorites  
You can add an On Demand show to Favorites to make the show episodes easy to
find and tune.  
1\. Search for and locate a show. (Refer to “Listening to On Demand Shows” on
page 36.)  
2\. Once you have located a show, or a show episode, highlight the show or
show episode by turning the Tune Knob.  
3\. Press the Add To Favorites Button to add the show to Favorites.  
4\. The confirmation message Show added to favorites will be displayed to
confirm the show has added to favorites.

All Shows  
~~~ 105 EW Radio ~~~ Women on Pop Westworld Analysis Mode  
Show added to favorites  
The Jess Cagle Interview Superhero Insider  
Add To Favorites

Listening to Recent Shows/Channels

Mondo+ User Guide

The Mondo+ keeps a list of the most recent shows and channels you have
listened to. You can easily tune to them again from the Recent list.

1\. While in the SiriusXM app.

2\. Turn turn the Tune Knob to highlight Recent, and press the Tune Knob to
select.  
3\. Turn the Tune Knob to highlight a recent show or channel in the list and
press the Tune Knob to tune the show or channel.

Recent  
60s on 6  
The Four Seasons – Working My Way Back To You (66)  
EW Radio  
Seth Speaks – Seth Rudetsky  
Radio Margaritaville  
Lionel Ritchie/Jimmy Buffett – All Night Long

4\. If a channel in the Recent list has been personalized for MyMix, the MyMix
channel can be tuned by pressing the Play MyMix Button.

Categories Favorite Shows On Demand

Play MyMix

38

> [Search](https://manual-hub.com/)

Mondo+ User Guide

Listening to Favorites

You can add shows to Favorites using On Demand (page 36), and then select and
listen to them from Favorites.

Listening to a Favorite Show  
1\. While in the SiriusXM app.  
2\. Turn the Tune Knob to highlight On Demand, and press the Tune Knob to
select.  
3\. Turn the Tune Knob to highlight Favorites, and press the Tune Knob to
select.  
4\. Turn the Tune Knob to highlight a favorite show in the list and press the
Tune Knob to listen.

Favorites  
Women on Pop Cousin Brucie at the San Gennaro Fe…  
Delete Favorite

Deleting a Favorite Show

1\. While in the SiriusXM app.

2\. Turn the Tune Knob to highlight On Demand, and press the Tune Knob to
select.

Favorites  
Women on Pop

3\. Turn the Tune Knob to highlight Favorites, and press the Tune Knob to
select.  
4\. Turn the Tune Knob to highlight the favorite show in the list which you
want to delete and press the Delete Favorite Button.  
5\. The message Show removed from favorites is displayed to confirm that the
show has been deleted from favorites.

Cousin Brucie at the San Gennaro Fe…  
Show removed from favorites  
Delete Favorite

> [Search](https://manual-hub.com/)

39

Advanced Features

Mondo+ User Guide

Start Now, Pause/Play, Rewind, Fast Forward, and Go to Live  
The Mondo+ is able to pause, rewind, and fast-forward through channels and
content. When listening to SiriusXM channels live, you can rewind up to the
past 5 hours of content that aired on the channel. When listening to On Demand
content, or content saved as Favorites you can also pause, rewind, and fast-
forward through the show episode. When listening to a MyMix channel, you can
pause or resume playing the current song, fast-forward to the next song, or
rewind to the previous song.  
The Now Playing screen has Context Sensitive Buttons at the bottom of the
display screen for these features:  
Start Now: (Available when listening to SiriusXM channels live.) Pressing
Start Now lists all the shows that have played on the channel in the past 5
hours. Select a show to begin listening from the beginning.  
Play/Pause: Pause and resume playing the channel or content.  
Rewind: (Available when listening to SiriusXM, On Demand, and MyMix.) Rewinds
back through content. When listening to SiriusXM live, you can rewind 5 hours.
When listening to On Demand or Favorite content, you can rewind back through
the show episode to the beginning. When listening to MyMix, you can rewind
back to the previous song.  
Fast-Forward: (Available when listening to SiriusXM, On Demand, and MyMix.)
Fast forward through the channel or content. When listening to SiriusXM in
Replay mode, you can fast forward until you reach live. When listening to On
Demand or Favorite content, you can fast forward through the through the show
until you reach the end. When listening to MyMix, you can Fast Forward to the
next song.  
Go to Live: (Available when listening to SiriusXM channels lice, or MyMix.) If
you are listening to SiriusXM, and are not listening live, pressing Go to Live
will jump to live. If you are listening to MyMix, pressing Go to Live will
exit MyMix and play the channel live.  
TuneStart  
TuneStart plays the current song from the beginning when you tune to a music
channel. TuneStart is disabled by default, or if you had previously enabled
TuneStart for your SiriusXM streaming account, it will be enabled on the
Mondo+.  
NOTE: Certain music channels are not eligible for TuneStart due to the way in
which they are broadcast. While these music channels can be saved as smart
favorites, TuneStart will not occur for these channels.  
To Enable or Disable TuneStart  
1\. While in the SiriusXM app press the Tune Knob to highlight Setup. Press
the Tune Knob to select.  
2\. Turn the Tune Knob and highlight SiriusXM Account and press the Tune Knob
to select.  
3\. Turn the Tune Knob and highlight TuneStart and press the Tune Knob to
enable or disable TuneStart. A checkmark in the TuneStart box indicates that
TuneStart is enabled.

Mondo+ User Guide

Advanced Features

Enter Your SiriusXM Streaming Account Information

The Mondo+ requires your SiriusXM streaming username and password to connect
to SiriusXM. If are not yet subscribed to SiriusXM, go to
siriusxm.com/streaming or call 866-6352349. When subscribed, you will be
provided with your account username and password.

1\. While in the SiriusXM app turn the Tune Knob to highlight Setup and press
the Tune Knob to select. Turn the Tune Knob to highlight SiriusXM Account and
press Tune Knob to select.

2\. Username will be highlighted. Press the Tune Knob. Enter each character in
your SiriusXM streaming username and press the Tune Knob to select the
character. When complete press the Enter Button. Your username is case
sensitive.

3\. Turn the Tune Knob to highlight Password and press the Tune Knob to
select. Enter each character in your password and press the Tune Knob to
select the character. When complete press the Enter Button. Your password is
case sensitive.  
4\. The Mondo+ will connect to SiriusXM and confirm the username and password
you entered. If correct, “SiriusXM credentials accepted” will be briefly
displayed.

SiriusXM Account  
Username  
B a A _

Cancel

Move Left

Enter

Move Right

Delete

The installation is complete.

> [Search](https://manual-hub.com/)

41

Product Specifications

Mondo+ User Guide

Mondo+ Dimensions: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . 10.75 in (W) X 6.0 in (H) X 5.25 in (D) 273 mm (W) x 152 mm
(H) x 133 mm (D) Weight: . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . 3.0 lbs (1.36 kg)  
Power Adapter Input: . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . 100-240 VAC, 50/60 Hz, 0.2 A Output: . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
VDC, 1.0 A  
Remote Control Dimensions: . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . 1.5 in (W) x 3.375 in (H) x .25 in (D) 38 mm (W) x 86
mm (H) x 6 mm (D) Weight: . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . 0.6 oz (20 g) Battery: . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AAA  
Audio Headphone: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . 3.5 mm diameter mini stereo jack Aux In: . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.5 mm diameter
mini stereo jack

42

> [Search](https://manual-hub.com/)

Mondo+ User Guide  
Supported Audio Codecs  
· MP3 · AAC · FLAC · LPCM/WAV/AIFF · ALAC · WMA, WMA9 · Ogg Vorbis  
Supported Playlist  
· ASX · M3U · PLS · WPL

Detail Streaming Support Protocols  
Supported Container Formats  
· WAV · M4A · OGG · AIFF  
Supported Protocols  
· SHOUTcast · HTTPS · WMA streaming · RTSP/SDP

Detail Audio Codec Support

Mondo+ User Guide

Supported MP3 encoding parameters  
· Sampling rates [kHz]: 32, 44.1, 48 · Resolution [bits]: 16 · Bit rate
[kbps]: 32, 40, 48, 56, 64, 80, 96, 112, 128, 160, 192, 224, 256, 320, VBR ·
Channels: stereo, joined stereo, mono · MP3PRO playback · MP3 File extensions:
*.mp3 · Decoding of ID3v1, ID3v2, MP3 ID tags including optional album art in
.jpeg format up to 2  
megapixels  
· Gapless MP3: Playback is gapless if the container provides LAME encoder
delay and  
padding tags.

Supported Vorbis encoding parameters  
· Sampling rates [kHz]: 32, 44.1, 48 · Resolution [bits]: 16  
· Nominal bit rate [kbps] (quality level): 80 (Q1), 96 (Q2), 112 (Q3), 128
(Q4), 160 (Q5), 192 (Q6), · Channels: stereo · The audio player supports
reading of Vorbis content stored in Ogg containers. Supported  
file name extensions: *.ogg and *.oga.  
· The audio player supports decoding of Vorbis comments.  
NOTE: There is no specification for tag names. The system relies on the OSS
implementation.  
· Tag names decoded: TITLE, ALBUM, ARTIST, GENRE. · Binary data (e.g. for
album art) is not supported. · The audio player supports gapless Vorbis
playback.

Supported FLAC encoding parameters  
· Sampling rates [kHz]: 44.1, 48, 88.2, 96, 176.4, 192 · Resolution [bits]:
16, 24 · Channels: stereo, mono · The audio player supports reading of FLAC
content stored in native FLAC containers.  
Supported file name extensions: *.flac  
· FLAC comments and ID tag support:  
· The audio player supports decoding of FLAC comments.  
NOTE: There is no specification for tag names. The system relies on the OSS
implementation.

44

> [Search](https://manual-hub.com/)

Mondo+ User Guide

Detail Audio Codec Support

· Tag names decoded: TITLE, ALBUM, ARTIST, GENRE.  
NOTE: ID3v2 tags for native FLAC and FLAC containers are out of standard but
should be supported if placed at the beginning of a file, see the FLAC-FAQ.  
· Gapless FLAC

Supported Uncompressed LPCM , WAV, AIFF encoding parameters  
· Sampling rates [kHz]: 44.1, 48, 96, 192 · Resolution [bits]: 16, 24 ·
Channels: stereo, mono · Gapless LPCM, WAV, adnd AIFF · Supported file name
extensions: *.wav,*.aiff, *.aif. (AIFF-C not supported) · The audio player
supports extraction of INFO chunks in WAV containers for the following  
metadata tags: TITLE, ALBUM, ARTIST  
· The audio player supports reading of uncompressed LPCM content stored in  
AIFF containers.  
· Support of ID3 chunks in AIFF containers  
Supported AAC (AAC-LC /HE-AAC/HE-AAC v2 ) encoding parameters  
· Sampling rates [kHz]: 32, 44.1, 48, 96 · Resolution [bits]: 16 · Bit rate
[kbps]: 8, 16, 24, 32, 40, 48, 56, 64, 80, 96, 112, 128, 160, 192 · Channels:
stereo, mono · The audio player supports reading of aac content stored in
single stream aac files and mp4  
containers. Supported file name extensions: *.aac, *.m4a  
NOTE: m4b containers are supported for playback only; bookmarks, chapter
markers, hyperlinks, images and other metadata embedded in m4b containers are
not supported. NOTE: Single stream aac files and mp4 containers support ID3
tagging, hence extraction of that metadata is covered by extraction of ID3
tags for mp3 content.  
· AAC ID3 tags support · The audio player supports decoding of ID3v1 and ID3v2
tags in containers  
· The audio player supports decoding of AAC comments.  
NOTE: There is no specification for tag names. The system relies on the OSS
implementation.  
· Tag names decoded: TITLE, ALBUM, ARTIST, GENRE.  
· Gapless AAC: Playback is gapless if the M4A container provides encoder delay
and padding  
information according to iTunes tags, or encoder delay according to Nero tags.

Detail Audio Codec Support

Mondo+ User Guide

Supported WMA encoding parameters  
· Sampling rates [kHz]: 32, 44.1, 48 · Resolution [bits]: 16 · Bit rate
[kbps]: 48, 64, 96, 128, 192 · Channels: stereo, mono · The audio player
supports reading of wma content stored in native wma files. Supported file  
name extensions: *.wma  
· The audio player supports extraction of ASF metadata from native wma files.  
Supported ALAC encoding parameters  
· Sampling rates [kHz]: 44.1, 48, 88.2, 96, 176.4, 192 · Resolution [bits]:
16, 24 · Channels: stereo, mono · Supported ALAC containers and file
extensions · The audio player supports reading of ALAC content stored in mp4
containers. Supported  
file name extensions: *.m4a  
· ALAC ID3 tags support · The audio player supports decoding of ALAC comments.  
NOTE: There is no specification for tag names. The system relies on the OSS
implementation.  
· Tag names decoded: TITLE, ALBUM, ARTIST, GENRE. · Gapless ALAC  
NOTE: For correct gapless decoding, the container must provide correct encoder
delay metadata (or no encoder delay at all!), which is different from lossy
compression formats like AAC.

46

> [Search](https://manual-hub.com/)

Mondo+ User Guide

Environmental Information

Environmental Information  
Follow local guidelines for waste disposal when discarding packaging,
electronic appliances, and batteries.  
Your Radio is packaged with cardboard, polyethylene, etc., and does not
contain any unnecessary materials.  
WARNING!: This product contains chemicals known to the State of California to
cause cancer and birth defects or other reproductive harm.

FCC Statement

Mondo+ User Guide

The user is cautioned that changes or modifications not expressly approved by
Sirius XM Radio Inc can void the user’s authority to operate this device.  
This device complies with Part 15 of the FCC Rules:  
1\. This device may not cause harmful interference.  
2\. This device must accept any interference received, including interference
that may cause undesired operation.  
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation.  
This equipment generates, uses and can radiate Radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to Radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to Radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:  
· To comply with FCC RF exposure compliance requirements, a separation
distance of at  
least 20 cm must be maintained between the antenna of this device and all
persons.  
· This device must not be co-located or operating in conjunction with any
other antenna  
or transmitter.

48

> [Search](https://manual-hub.com/)

Mondo+ User Guide

Important Legal Information

End User License Agreement (EULA) Terms and Conditions

(1) End User will have only a non-exclusive, nontransferable license to use
the software embedded (Licensed Software) in the GRACE DIGITAL product
(Licensed Product), and hence the license is restricted to the scope of the
use in the Licensed Product. (2) End User acknowledges that any and all
transactions by means of the Licensed Software can only be performed on a
certain Cloud Server, which is regulated in the terms and conditions that are
laid down in the “Cloud Server terms and conditions” (identified below) which
are explicitly accepted by the End User. (3) End User is prohibited from
reverse engineering (unless required by law for interoperability), disassembly
or decompilation of the Licensed Software and the duplication of the Licensed
Software. (4) End User is prohibited from transferring the Licensed Software
to another machine. Even if the original Licensed Product is no longer in use,
or if the Licensed Software is removed from the original hardware, the EULA is
tied to the device on which the Licensed Software is first installed. (5)
GRACE DIGITAL disclaims, to the extent permitted by applicable law, any
warranty including the implied warranties of satisfactory quality, fitness for
a particular purpose, non-infringement and those arising from a course of
performance. GRACE DIGITAL does further not warrant that the operation of the
Licensed Software will be uninterrupted or error free or that all deficiencies
will be corrected. (6) GRACE DIGITAL disclaims any liability for any damages,
whether direct, indirect, incidental, or consequential, arising from the use
of the Licensed Software. (7) GRACE DIGITAL disclaims liability for the
availability and proper functioning of such audio services features, unless it
can be demonstrated that GRACE DIGITAL acted willfully or was grossly
negligent. (8) The End User acknowledges that the Licensed Software can only
be used in conjunction with the Licensed Product and further, that Licensed
Software under certain circumstances supports audio services feature, such as
Google Cast, which are all subject to the terms of service entered into by the
End User and the respective developer, e.g. Google Inc., directly. (9) End
User consents that its use of the Licensed Software is audited indirectly by
GRACE DIGITAL through the logging of the usage activities of the Cloud Server
and that improper use can also be reported to GRACE DIGITAL, and that any
audit rights of the Licensor can be assigned to GRACE DIGITAL. (10) The End
User is notified that the permission to use the Licensed Software ends with
its revocation by GRACE DIGITAL under certain circumstances, which are
provided for in ” Revocation of the right to use the Licensed Software”
(identified below). (11) The End User must acknowledge that the developers of
the audio services features, such as Google Inc., may also revoke the license
keys to use their feature independently from the EULA and therefore, GRACE
DIGITAL cannot intervene in such measures on its own or influence such actions
in any other way and cannot be made responsible for the interruption of the
services of audio services features, such as Google Cast by the End User. (12)
GRACE DIGITAL is designated and accepted expressly as a third party
beneficiary due to its intellectual property rights in the Licensed Software
of all of the terms of the EULA and End User shall agree that GRACE DIGITAL
shall be entitled to enforce its intellectual property rights in the Licensed
Software as such under this EULA.

Cloud Server terms and conditions  
(i) The End User acknowledges that the Licensed Software was developed by
StreamUnlimited Engineering GmbH (hereinafter referred to as “SUE”), and that
SUE organizes and supports the cloud server, which is required to access the
audio services (the “Cloud Server”).  
(ii) The End User acknowledges that any use of the Licensed Software and any
supported online music feature (e.g. Google Cast) or any other feature may
involve a transaction to a Cloud Server, which could be the “Google App
Engine”, operated and hosted by Google, Inc., USA, or any similar operated and
hosted by a third party, and therefore SUE is not liable for any unauthorized
access to this Cloud Server, and the data processed hereunder.  
(iii) End User may only access the Cloud Server via subscription with the
Licensed Product or in a manner otherwise approved by Grace Digital Inc.  
(iv) Upon acceptance of the terms and conditions of the EULA the End User will
be granted a non-exclusive, revocable, non-transferable, limited license to
use the respective Cloud Server solely for the purpose of streaming content by
means of the Licensed Software and the respective online music feature as
embedded in the Licensed Product in accordance with the terms and conditions
of the EULA.  
(v) End User acknowledges and agrees that it does not have, nor will it claim
any right, title or interest in the Cloud Server, data, applications, methods
of doing business or any elements thereof, or any content processed on the
Cloud Server.  
(vi) The license of the End User to use the Cloud Server terminates with the
abandonment of the ownership in the Licensed Product.

#### Important Legal Information

Mondo+ User Guide

Data Processing for activation and auditing purpose  
(vii) End User acknowledges that SUE is entitled to audit the proper use of
the Licensed Software by the End User, in order to detect any illegal or
otherwise irregular use of the Licensed Software (e.g. transfer of a copy of
the Licensed Software to a non-licensed device), with appropriate means.  
(viii) The Licensed Product may communicate with the Cloud Server during any
operation, which generates certain data that are used to authenticate and to
audit the legitimate use of the Licensed Software by SUE. This data processing
is a feature, which does not infringe the interests of the End User in secrecy
deserving protection, because SUE can invoke on its legitimate prevailing
interests as owner of the intellectual property rights in the Licensed
Software to audit the proper use.  
(ix) Hence, End User acknowledges that the usage of the Licensed Software is
monitored by SUE in a way that any operation by using the Licensed Product is
logged by SUE by means of processing the product MAC addresses, the IP Address
of the End User, the brand name, model name and firmware version of the
Licensed Product, the Token (if applicable) and a timestamp regarding the
transactions upon each access to the Cloud Server. By analyzing these data SUE
can detect any misuse of the Licensed Software. The End User further
acknowledges that SUE may store and process any data from such monitoring
activities, analyze this data in the case of a strong suspicion of unlawful
misuse of Licensed Software and also transmit the data in a non-personal
related format to the respective developers of any supported features,
provided that the suspicion of infringement by the End User is substantiated.  
I) Revocation of the right to use the Licensed Software  
(x) The End User acknowledges that the right to use the Licensed Software can
be revoked by SUE, if the analysis of the monitored data indicates a strong
suspicion of unlawful misuse of the Licensed Software, and that he receives an
automated notification with the instruction to contact Grace Digital customer
support. If the End User turns out to be the legitimate one, the customer
support can enable again the Licensed Product for the End User.  
(xi) The End User accepts that SUE is third party beneficiary of the EULA due
to its intellectual property rights in the Licensed Software with regard to
the use of the Licensed Software and can, therefore, defend the rights in the
Licensed Software as well as enforce any rights and claims from a misuse of
the Licensed Software or an infringement of the EULA directly against the End
User.  
Grace Radio Station List  
End User acknowledges that when using the Grace radio station list that the
Grace servers identifies the user’s radio by means of processing the product
MAC addresses, and a timestamp regarding the transactions I order to provide
the radio the list of stations list. The End User acknowledges that Grace
Digital may store and process any data from such communications activities in
order to provide service to the user’s radios.  
The Grace Radio stations list is maintained by Grace and some independent
partners. We do not warrant or guarantee the access to a specific radio
station for the life of the product as Grace Digital cannot control the radio
station’s desire to be in the database or for a station’s ability to continue
operations.  
Other Third Party Service Providers  
End User acknowledges that when using other 3rd party service providers on the
Grace radios that those individual service providers may track the radio’s
interaction with their 3rd party service. The End User acknowledges that Grace
Digital does not manage, control or track usage of the radios when the end
user is using 3rd party service providers. Additionally, while Grace Digital
will do their best to ensure that each service is available on the Grace radio
for the life of the product, Grace Digital cannot control nor is it connected
to any service provider. Grace Digital cannot guarantee that service providers
will continue to operate, or continue to make their service available on this
device under the current terms offered by the various 3rd party service
providers.

50

> [Search](https://manual-hub.com/)

Mondo+ User Guide

Important Legal Information

Important Notice: Required Subscription  
Hardware and subscription sold separately, and activation fee required. Other
fees and taxes may apply. Subscriptions governed by SiriusXM Customer
Agreement; see www.siriusxm.com. Service automatically renews into the
subscription Package you choose (which may differ from the Package which
arrived with the Radio), for additional periods of the same length, and
automatically bills at then-current rates, after any complimentary trial or
promotional period ends. You must call us to cancel at
1-[866-635-2349](https://phone.gd/phone/866-635-2349). Fees and programming
are subject to change.  
© 2017 Grace Digital Inc. “Sirius”, “XM” and all related marks and logos are
trademarks of Sirius XM Radio Inc. and its subsidiaries. All other marks and
logos are the property of their respective owners. All rights reserved.
Certain features depend on subscription package.

> [Search](https://manual-hub.com/)

51

© 2017 Grace Digital Inc.

Grace Digital Inc. 11895 Community Road  
Poway, CA 92064  
1.866.446.0961  
gracedigital.com

> [Search](https://manual-hub.com/)





#### References

  * [ Grace Digital Internet Radio – gracedigital](http://gracedigital.com "Grace Digital Internet Radio – gracedigital")
  * [ Manual-Hub.com - Free PDF manuals!](http://manual-hub.com/ "Manual-Hub.com - Free PDF manuals!")
  * [ Audacy Inc: An Audio Universe of Discovery & Connection](http://radio.com "Audacy Inc: An Audio Universe of Discovery & Connection")
  * [ SiriusXM: Music, Sports, Talk & Podcasts, Live & On Demand](http://siriusxm.com "SiriusXM: Music, Sports, Talk & Podcasts, Live & On Demand")
  * [ Channel Lineup & Guide | SiriusXM](http://siriusxm.com/channellineup "Channel Lineup & Guide | SiriusXM")
  * [ SiriusXM is Loading](http://siriusxm.com/streaming "SiriusXM is Loading")
  * [ Spotify - Connect](http://Spotify.com/connect "Spotify - Connect")
  * [ Spotify Premium - Spotify (US)](http://Spotify.com/premium "Spotify Premium - Spotify \(US\)")
  * [ MyRadios+](http://www.myradiosplus.gracedigital.com "MyRadios+")
  * [ SiriusXM: Music, Sports, Talk & Podcasts, Live & On Demand](http://www.siriusxm.com "SiriusXM: Music, Sports, Talk & Podcasts, Live & On Demand")
  * [ Manual-Hub.com – Free PDF manuals!](https://manual-hub.com/ "Manual-Hub.com – Free PDF manuals!")

## Read User Manual Online (PDF format)

[Read User Manual Online (PDF format)&nbsp;&nbsp;&gt;&gt;](/pdf/359890-next-post-next-postgrace-digital-gdi-aqrck400-rock-sounders-weatherproof-wireless-900mhz-speaker-system-user-guide)

## Download This Manual (PDF format)

[Download this manual&nbsp;&nbsp;&gt;&gt;](https://manuals.plus/m/d8a50318f2c436dcc4005188ecc540b8088c4ac2a2d25bffc5d9d2fa68dc0a9e_optim.pdf)

Related Manuals