PowerPoint P16SE4VSS Built-In Hob User Manual

June 4, 2024
PowerPoint

P16SE4VSS Built-In Hob
User ManualPowerPoint P16SE4VSS Built-In Hob

P16SE4VSS

Thank you for choosing this product.
This User Manual contains important safety information and instructions on the operation and maintenance of your appliance.
Please take the time to read this User Manual before using your appliance and keep this book for future reference.

Icon Type Meaning
WARNING Serious injury or death risk
RISK OF ELECTRIC SHOCK Dangerous voltage risk
**** FIRE Warning; Risk of fire / flammable materials
CAUTION Injury or property damage risk
IMPORTANT / NOTE Operating the system correctly

SAFETY INSTRUCTIONS

  • Carefully read all instructions before using your appliance and keep them in a convenient place for reference when necessary.
  • This manual has been prepared for more than one model therefore your appliance may not have some of the features described within. For this reason, it is important to  pay particular attention to any figures whilst reading the operating manual.

1.1 General Safety Warnings

  • This appliance can be used by children aged from 8 years and above and by persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children should not play with the appliance. Cleaning and user maintenance should not be made by children without supervision.

WARNING: The appliance and its accessible parts become hot during use. Care should be taken to avoid touching heating elements. Keep children less than 8 years of age away unless they are continually supervised.
WARNING: Unattended cooking on a hob with fat or oil can be dangerous and may result in fire. NEVER try to extinguish such a fire with water, but switch off the appliance and cover the flame with a lid or a fire blanket.
CAUTION: The cooking process has to be supervised. A short-term cooking process has to be supervised continuously
WARNING: Danger of fire: Do not store items on cooking surfaces.
WARNING: If the surface is cracked, switch off the appliance to avoid the possibility of electric shock.

  • For models which incorporate a hob lid, clean any spillages off the lid before use and allow the cooker to cool before closing the lid.
  • Do not operate the appliance by means of an external timer or a separate remote-control system.
  • Do not use harsh abrasive cleaners or scouring pads to clean oven surfaces. They can scratch the surfaces which may result in shattering of the door glass or damage to surfaces.
  • Do not use steam cleaners for cleaning the appliance.
  • Your appliance is produced in accordance with all applicable local and international standards and regulations.
  • Maintenance and repair work should only be carried out by authorized service technicians. Installation and repair work that is carried out by unauthorized technicians may be dangerous. Do not alter or modify the specifications of the appliance in any way. Inappropriate hob guards can cause accidents.
  • Before connecting your appliance, make sure that the local distribution conditions (nature of the gas and gas pressure or electricity voltage and frequency) and the specifications of the appliance are compatible. The specifications for this appliance are stated on the label.

CAUTION: This appliance is designed only for cooking food and is intended for indoor domestic household use only. It should not be used for any other purpose or in any other application, such as for non-domestic use, in a commercial environment or for heating a room.

  • All possible measures have been taken to ensure your safety. Since the glass may break, care should be taken when cleaning to avoid scratching. Avoid hitting or knocking the glass with accessories.
  • Make sure that the supply cord is not trapped or damaged during installation. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to prevent a hazard.
  • Please keep children and animals away from this appliance.

1.2 inStallation WarninGS

  • Do not operate the appliance before it is fully installed.

  • The appliance must be installed by an authorized technician. The manufacturer is not responsible for any damage that might be caused by defective placement and installation by unauthorized people.

  • When the appliance is unpacked, make sure that it has not been damaged during transportation.
    In the case of a defect do not use the appliance and contact a qualified service agent immediately.
    The materials used for packaging (nylon, staplers, Styrofoam, etc.) may be harmful to children and they should be collected and removed immediately.

  • Protect your appliance from the atmosphere. Do not expose it to sun, rain, snow, dust or excessive humidity.

  • Materials around the appliance (i.e. cabinets) must be able to withstand a minimum temperature of 100°C.

  • The temperature of the bottom surface of the hob may rise during operation, therefore a board must be installed underneath the product.

1.3 DurinG uSe

  • Do not put flammable or combustible materials in or near the appliance while it is operating.
    ****Do not leave the cooker unattended when cooking with solid or liquid oils. They may catch fire under extreme heating conditions. Never pour water on to flames that are caused by oil, instead switch the cooker off and cover the pan with its lid or a fire blanket.

  • Always position pans over the center of the cooking zone, and turn the handles to a safe position so they cannot be knocked or grabbed.

  • If the product will not be used for a long period of time, turn the main control switch off.

  • Make sure the appliance control knobs are always in the “0” (stop) position when the appliance is not in use.

1.4 DurinG CleaninG anD MaintenanCe

  • Make sure that your appliance is turned off at the mains before carrying out any cleaning or maintenance operations.
  • Do not remove the control knobs to clean the control panel.
  • To maintain the efficiency and safety of your appliance, we recommend you always use original spare parts and call our authorized service agents when needed.

CE Declaration of conformity
We declare that our products meet the applicable European Directives, Decisions, and Regulations and the requirements listed in the standards referenced.
This appliance has been designed to be used only for home cooking. Any other use (such as heating a room) is improper and dangerous.
The operating instructions apply to several models.
You may notice differences between these instructions and your model.

Disposal of your old machine
This symbol on the product or on its packaging indicates that this product should not be treated as household waste. Instead, it should be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. For more detailed information about recycling this product, please contact your local city office, your household waste disposal service, or the retailer who you purchased this product from.

INSTALLATION AND PREPARATION FOR USE

WARNING: This appliance must be installed by an authorized service person or qualified technician, according to the instructions in this guide and in compliance with the current local regulations.

  • Incorrect installation may cause harm and damage, for which the manufacturer accepts no responsibility and the warranty will not be valid.
  • Prior to installation, ensure that the local distribution conditions (electricity voltage and frequency and/or nature of the gas and gas pressure) and the adjustments of the appliance are compatible. The adjustment conditions for this appliance are stated on the label.
  • The laws, ordinances, directives, and standards in force in the country of use are to be followed (safety regulations, proper recycling in accordance with the regulations, etc.).

2.1 inStruCtionS for the inStaller
General instructions

  • After removing the packaging material from the appliance and its accessories, ensure that the appliance is not damaged. If you suspect any damage, do not use it, and contact an authorized service person or qualified technician immediately.
  • Make sure that there are no flammable or combustible materials in close vicinity, such as curtains, oil, cloth, etc. which may catch fire.
  • The worktop and furniture surrounding the appliance must be made of materials resistant to temperatures above 100°C.
  • If a cooker hood or cupboard is to be installed above the appliance, the safety distance between the cooktop and any cupboard/cooker hood should be as shown below.

PowerPoint P16SE4VSS Built-In Hob - Figure 1

  • The appliance should not be installed directly above a dishwasher, fridge, freezer, washing machine, or clothes dryer.
  • If the base of the appliance is accessible by hand, a barrier made from a suitable material must be fitted below the base of the appliance, ensuring that there is no access to the base of the appliance.

2.2 In inStallation of the hob
The appliance is supplied with an installation kit including adhesive sealing material, fixing brackets, and screws.

  • Cut the aperture dimensions as indicated in the figure. Locate the aperture on the worktop so that, after the hob is installed, the following requirements are followed.
B (mm) 580 min. A (mm) 50
T (mm) 510 min. C (mm) 50
H (mm) 40 min. E (mm) 500
C1 (mm) 560 min. F (mm) 10
C2 (mm) 490 G (mm) 20
D (mm) 50 I (mm) 25
J (mm) 5

PowerPoint P16SE4VSS Built-In Hob - Figure 2

  • Place the hob in the cutout. Mark the location of the hob on the cooktop.
    PowerPoint P16SE4VSS Built-In Hob - Figure 3

  • Remove the hob. Place the gasket on the line you marked. Make sure that the line centers the gasket. Ensure that the junctions overlap at the corners and no gap is left along the sealing material.
    PowerPoint P16SE4VSS Built-In Hob - Figure 4

  • Insert the appliance into the aperture and fix in position using the brackets (A) and screws (B). Adjust the position of the brackets depending on the thickness of the worktop and tighten the screws evenly. Carefully trim away any excess sealing material (C) from around the appliance.
    PowerPoint P16SE4VSS Built-In Hob - Figure 5

2.3 eleCtriCal ConneCtion anD Safety
WARNING: The electrical connection of this appliance should be carried out by an authorized service person or qualified electrician, according to the instructions in this guide and in compliance with the current local regulations.
WARNING: THE APPLIANCE MUST BE EARTHED.

  • Before connecting the appliance to the power supply, the voltage rating of the appliance (stamped on the appliance identification plate) must be checked for correspondence to the available mains supply voltage, and the mains electric wiring should be capable of handling the appliance’s power rating (also indicated on the identification plate).
  • During installation, please ensure that isolated cables are used. An incorrect connection could damage your appliance. If the mains cable is damaged and needs to be replaced this should be done by a qualified person.
  • Do not use adaptors, multiple sockets and/or extension leads.
  • The supply cord should be kept away from hot parts of the appliance and must not be bent or compressed. Otherwise, the cord may be damaged, causing a short circuit.
  • If the appliance is not connected to the mains with a plug, a all-pole disconnector switch (with at least 3 mm contact spacing) must be used in order to meet the safety regulations.
  • The fused switch must be easily accessible once the appliance has been installed.
  • Ensure all connections are adequately tightened.
  • Fix the supply cable in the cable clamp and then close the cover.
  • The terminal box connection is placed on the terminal box.
    PowerPoint P16SE4VSS Built-In Hob - Figure 6

PRODUCT FEATURES

Important: Specifications for the product vary and the appearance of your appliance may differ from that shown in the figures below.
List of ComponentsPowerPoint P16SE4VSS Built-In Hob - Figure
7

  1. Hotplate
  2. Control Panel

USE OF PRODUCT

4.1 hob ControlS
Hotplate
The hotplate is controlled by a knob with 6 positions.
The hotplate can be operated by switching the control knob to one of these positions.
Near each hob control knob, there is a small symbol that shows which hotplate is controlled by that knob. The on/off light on the control panel shows which hotplates are in use.PowerPoint P16SE4VSS Built-In Hob - Figure
8

Knob Position Function
0 Off position
1 To melt butter etc. and to warm small quantities of liquid
2 To warm bigger quantities of liquid. To prepare creams and sauces
3 To defrost food for cooking
4 To cook delicate meat and fish
5 To roast meat and steak
6 To boil big quantities of liquid or to fry

WARNING:

  • When operating the hotplate for the first time, or after it has not been used for a prolonged period of time, it is necessary to eliminate any humidity which may have accumulated around the electrical elements of the plate. To do this, operate the hotplate on its lowest setting for about 20 minutes.

  • Never operate a hotplate without pans on. Otherwise, form defects may occur on the cooktop.

  • Only use flat-bottomed pans with thick bases.

  • Make sure the bottom of the pan is dry before placing it on a hot plate.

  • When a hotplate is in operation, make sure that the pan is centered correctly on it.

  • Never use a pan with a smaller or larger diameter than that of the hotplate as this will waste energy.
    PowerPoint P16SE4VSS Built-In Hob - Figure 9

  • If possible, always place lids on the pans to avoid heat loss.

  • The temperature of accessible parts may become high while the appliance is operating. It is imperative to keep children and animals well away from the hob during use and until it has fully cooled after use.

  • If you notice a crack on the cooktop, it must be immediately switched off and replaced by authorized service personnel or technician.

CLEANING AND MAINTENANCE

5.1 Cleanin
WARNING: Switch off the appliance and allow it to cool before cleaning is to be carried out.

General Instructions

  • Check whether the cleaning materials are appropriate and recommended by the manufacturer before use on your appliance.

  • Use cream cleaners or liquid cleaners which do not contain particles. Do not use caustic (corrosive) creams, abrasive cleaning powders, rough wire wool, or hard tools as they may damage the cooker surfaces.
    Do not use cleaners that contain particles, as they may scratch the glass, enameled, and/or painted parts of your appliance.

  • Should any liquids overflow, clean them immediately to avoid parts becoming damaged.
    Do not use steam cleaners for cleaning any part of the appliance.

Cleaning the Hotplate Heater

  • Clean the hotplate heater on a regular basis.
  • Wipe the hotplate with a soft cloth soaked in only water. Then, run the hotplate for a short time to dry it completely.

Cleaning the Enamelled Parts (if available)

  • Clean the enameled parts of your appliance on a regular basis.
  • Wipe the enameled parts with a soft cloth soaked in soapy water. Then, wipe them over again with a wet cloth and dry them.
    Do not clean the enameled parts while they are still hot from cooking.
    Do not leave vinegar, coffee, milk, salt, water, lemon, or tomato juice on the enamel for a long time.

Cleaning the Stainless Steel Parts (if available)

  • Clean the stainless steel parts of your appliance on a regular basis.
  • Wipe the stainless steel parts with a soft cloth soaked in only water. Then, dry them thoroughly with a dry cloth.
    Do not clean the stainless steel parts while they are still hot from cooking.
    Do not leave vinegar, coffee, milk, salt, water, lemon or tomato juice on the stainless steel for a long time.

TROUBLESHOOTING&TRANSPORT

6.1 Troubleshooting
If you still have a problem with your appliance after checking these basic troubleshooting steps, please contact an authorized service person or qualified technician.

Problem Possible Cause Solution
The hob or cooking zones cannot be switched on.  There is no power supply.

Check the household fuse for the appliance.
Check whether there is a power cut by trying other electronic appliances.
The hob produces an odor during the first cooking sessions.| New appliance.| Heat a saucepan full of water on each cooking zone for 30  minutes.

6.2 TRANSPORT
If you need to transport the product, use the original product packaging and carry it using its original case. Follow the transport signs on the packaging. Tape all independent parts to the product to prevent damaging the product during transport.
If you do not have the original packaging, prepare a carriage box so that the appliance, especially the external surfaces of the product, is protected against external threats.

Model| |
---|---|---
Type of Hob| | Electric
Number of Cooking Zones| | 4
Heating Technology-1| | Hotplate
Size-1| cm| 014,5
Energy Consumption-1| Wh/kg| 193,0
Heating Technology-2| | Hotplate
Size-2| cm| 014,5
Energy Consumption-2| Wh/kg| 193,0
Heating Technology-3| | Hotplate
Size-3| cm| 018,0
Energy Consumption-3| Wh/kg| 193,0
Heating Technology-4| | Hotplate
Size-4| cm| 018,0
Energy Consumption-4| Wh/kg| 193,0
Energy Consumption of Hob| Wh/kg| 193,0
This hob complies with EN 60350-2| |
Energy Saving Tips Hob
– Use cookware with a flat base.
– Use cookware of the proper size.
– Use cookware with a lid.
– Minimize the amount of liquid or fat.
– When the liquid starts boiling, reduce the setting.

52202020

Documents / Resources

| PowerPoint P16SE4VSS Built-In Hob [pdf] User Manual
P16SE4VSS, Built-In Hob, P16SE4VSS Built-In Hob
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals