OEMIRY OM-ROF01 Countertop Reverse Osmosis Water Filtration Purification System Instruction Manual
- June 15, 2024
- OEMIRY
Table of Contents
OEMIRY OM-ROF01 Countertop Reverse Osmosis Water Filtration Purification
System
Dear customer,
- Thank you for ordering our company’s countertop Reverse Osmosis water filter system!
- Now, you have advanced water purification equipment in the field of the drinking water treatment. It helps your drinking water safer and better for your health.
- The correct installation, standardized use and maintenance in accordance with this manual can make the water purifier play a better role.
- If you have any problems in installing or using process, please contact our on line technical support.
- B Online Technical Suppor t: Beheal7@outlook.com
Please read this instruction carefully before use
- This company reserves the right to interpret this instruction
- Product appearance depends on actual goods
- Please properly store it after reading with the receipt
- Without prior notice for upgrading of product technique or software
Precautions for use
Prohibitory Sign
| **** Any content with this sign means prohibition, or else the product may
be damaged, or endanger personal safety of the users.
---|---
Warning Sign
| ****
Any content with this sign, should be operated according to the requirements, or else the product may be damaged, or endanger personal safety of the users.
**Caution Sign**
| Any content with this sign, should be treated seriously, or else the product may be damaged, or endanger personal safety of the users.
- ****For your personal and property safety, please follow the safety tips within this manual to minimize property damage and personal injury. Do not operate this product without reading and understanding this manual, otherwise problems may occur.
- ****This product is not suitable for outdoor or indoor humid place. It must be installed indoors in a cool, dry and stable place strictly accordance with the requirements in this manual. Keep out of direct sunlight, flammable objects and other heat sources. Avoid places where water is splashed. Do not put foam, cardboard and other sundries on the bottom, to avoid water accumulation leading to electricity leakage.
- ****It is strictly forbidden to invert the product when it is energized; It is forbidden to invert the product when there is water in the product.
- ****Do not disassemble and repair the product yourself; Do not modify the product yourself, otherwise it will lead to safety accidents such as water leakage and electricity leakage.
- ****If the power cord is damaged, must be replaced by the designated repair point. It is strictly prohibited to modify the power plug or lengthen the power cord by yourself to avoid fire cause.
- ****Please do not squeeze, drop, collision the product in the transportation, installation, use process, otherwise it will lead to product damage or water leakage, electricity leakage and other safety accidents.
- If there’s any water leakage condition, turn off the power immediately and take off the water tank, discharge the remaining water in the system completely. Also please notify our online customer service or to be handled by professional service personnel, do not repair it by yourself. C-38°C(50°F-100.4 °F),
- The best working temperature of the water filter is 10 humidity<90%.
- If the water filter will not be used in a long time(above 3 days), please press the outlet button to discharge the remaining water completely, and turn off the power finally.
- The machine should be placed on a flat surface when using, and the inclination should be less than 5° to avoid injury caused by product falling. The fuselage should be more than 10cm away from other objects, otherwise it will affect the heat dissipation of the machine.
Technical Parameters
Note: All data are measured below 25°C.
Working Schematic Diagram
Note: Working schematic diagram is for your reference, specific situation is subject to the actual product.
Packing List
- RO Machine x1
- Drip Tray x1
- Instruction Manual x1
- PPC Composite Filter x1
- RO Filter x 1
Installation Method
- The installation of the product must obey following instructions. Incorrect installation may cause safety accidents, such as water leakage and electronic leakage.
- Take out the machine from the box and put it on the stable countertop. Fill the raw water tank and install it to the machine. Make sure the installation is complete, and then turn on the power.
- There will be some water in RO machine after using. If you want to move the machine to another place, please move it horizontally after unplug the plug, do not tilt.
Direction For Use
Status Explanation
- Change water light on: Means the raw water tank is lack of water (needs to change water), or the raw water tank has been taken away.
- Filtering light on: Means the RO system is filtering water.
- Flushing light on: Means the system is flushing filter elements.
- RO/PPC filter flashing: Means the life of the filter element has expired and needs to be replaced.
- UV light on: Means the water is in the UV sterilization status.
- Optional volume light on: Means the volume of the water has been chosen, you will get corresponding volume of water.
- Child look-button light on : Means it currently is in the child lock state and water is prohibited filtering; Light off indicates that it currently is in the unlocked state and water can be discharged.
- Outlet button light on: Means the RO system can be operated currently, and light flashing means purified water is discharging.
Direction for first use
- Step 1 : Take out the raw water tank and fill the water (below the maximum water level), place it on the RO machine and cover the tank.
- Step 2 : Turn on the power, machine automatically flushes 30 seconds and then enter into filtering status. Entire process lasts about 30 minutes.
- Step 3 : Prepare a container with large capacity (more than 2.5L) placed at the outlet water, when change water light flashes, touch the child lock button, and then touch the water outlet button 8 seconds to drain until no water flows from the outlet.
- Step 4 : While draining, the display screen flashes and lasts 5 minutes. In this time, you should take out the raw water tank, pour out the residual water and refill, then put it on the system again.
- Step 5 : You can get purified water after the display screen stop flashing for one minute.
Direction for operating
- Child Lock Button: When touch the child lock button, the child lock light on, and the water cannot be discharged by touching the outlet button. Touch the child lock button again, the child lock light off and unlocks.
- Outlet Button: The outlet light is normally on and flashes when filtered water is out. In the child lock state, the water can not be discharged by touching the outlet button. In the child lock unlock state, select the water volume needed, touch the outlet button, outlet light flashes and water will be discharged. You can also touch outlet button to stop the water discharge.
- Optional Volume: The RO machine is designed with five different volume options: “160ml”, “230ml”, “330ml”, “450ml” and “Manual”. Touch the volume button as required and the selected volume light on. Then touch the outlet button to get pure water. By default, the volume set is 160ml when the system is working.
Screen Lock Explanation
- The product has set up the lock screen mode for environmental protection and safety. If there’s no operation for more than 60 seconds, the machine will enter the lock screen mode. In this mode, except the outlet button light on (when the child lock mode is turned on, the child lock light is always on), all other display lights are off.
- Under the lock screen mode, touch any buttons can wake up the screen.
Filter Element Replacement
- The filter element is a consumable material, it will lose original filtering effect when reached its service life; If Filter Lifespan Display light on, outflow is significantly reduced, or the quality and taste of filtered water become badly, means the filter element needs to be replaced.
Model | Filter Name | Function | Replacement Period |
---|---|---|---|
OM-ROF01-B | PPC Composite Filter | Effectively filter sediment , rust , |
suspended colloid, red worm and other solid impurities ; Removes residual
chlorine , peculiar color and ordor, macromolecular organic compounds and
other impurities in water.| 6-12 Months
OM-ROF01-A| RO Filter| 0.0001 micron RO membrane , effectively remove bacteria
, chemical pesticide residues, heavy metal ions , radioactive particles ,
microorganisms and other harmful substances in water.| 12-24 Months
Steps To Replace the Filter
- Turn off the power:
- Take off the water tank cover, refill the water.
- Rotate the filter element counterclockwise and take out the filter element that needs to be replaced.
- Rotate the new filter element clockwise.
- Cover the water tank cover.
- After the machine is placed stably, turn on the power.
- Reset the corresponding filter element life reminder.
Steps To Reset the Filter Element Life Reminder
- After changing the corresponding filter element, turn on the power.
- Touch “child lock button” and “outlet button” at the same time, after the beep sound, the filter life bar flashes quickly, then touch the “outlet button” to select the filter that needs to be reset. The selected filter light flashes, then touch the “child lock button” for 5 seconds, the reset is successful with a beep. The filter life bar lights again normally after the reset is successful.
Fault Diagnosis and Troubleshooting
- When the following fault code indicator lights up on screen, please contact our online service
Fault Code | Troubles | Cause Description | Solutions |
---|---|---|---|
ED | Bad water quality | The cartridge is going to be expired | Change new |
cartridge
Note: The filter needs to be replaced in time to ensure the safety of the filtered water. If not replace filter in time, it’ll weaken filtration efficiency, increase maintenance cost, shorten service life of water filter and cause other adverse effects.
Warranty Statement
The OEMIRY countertop Reverse Osmosis water filter system(model No: OM-ROF01) offers 1-year warranty, which covers defects in materials and workmanship from the original date of purchase. If the product proves to be defective within 1 year from the date of purchase, please contact us get support via Customer Service Center. During the warranty period, we will replace or repair any part that is deemed to be defective if the product has not been subjected to tampering, alteration, or improper use after delivery, and has not been repaired by the manufacturer. The product is not warranted against misuse, use in abnormal temperature conditions, conditions listed outside the operating parameters, or use in commercial operations or any other manner outside the “system specification” set forth in the owner’s manual. Our obligation does not include the cost of transportation, We are not responsible for damage in transit; claims for such damage should be presented to the carrier by the customer.
NOTE: The warranty does not apply to any filter cartridge, which has a life expectancy that varies based on incoming water quality.
- Online Technical Suppor t: Beheal7@outlook.com