OEMIRY OM-CF01 Countertop Water Filter System Instruction Manual

OEMIRY OM-CF01 Countertop Water Filter System

MODEL NO. OM-CF01

Countertop Stainless-Steel
Faucet Water Filtration System

About the System
Thanks for choosing OEMIRY Countertop Stain-Steel Faucet Water Filtration System. The product adopts activated carbon block to provide you with healthy water and release beneficial minerals. Its multistage filtration can reduce harmful substances such as chlorine lead, fluoride, arsenic, etc. Also, it inhibits the bacteria from building up. The filtration system is made of 304 food-grade stainless steel to ensure quality and durability, and the precise design makes it easy to install. The system doesn’t need a power supply while it produces no waste water. You can get both tap water and filtered water by a switch.

System Specifications

NOTE: Do not use water that is microbiological unsafe or of unknown quality without adequate disinfection before or after use of the system

Parts List

• (A) Filter housing
• (B) Filter
• (C) Stainless-steel base
• (D) Spout
• (E) Mounting base
• (F) Wrench1
• (G) A3 adapter (15/16″ -27)
  • A4 adapter (13/16″)
  • A5 adapter (M18.5)
  • A6 adapter (M21.5)
  • B4 adapter (M18.5)
• (H) Wrench 2

Installation Instructions

1. Take out the system and accessories.
2. Remove the faucet’s aerator and choose the right adapter to match your faucet threading. Make sure the washer between faucet and the the system is installed firmly.

How to choose the right adapter

1. For external threaded faucets, please connect the adapter directly to the mounting base (E). Please select adapter(B4) if the mounting base(E) is not fitted to the faucet.
2. For internal threaded faucets, select the appropriate adapter (A3/4/A5/A6) according to the thread size, connect it to the faucet and tighten them with a coir like below. Make sure the white sealing ring is in the mounting base (E), then connect the adapter to the the mounting base(E), please install it firmly.
3.  Screw the the filter housing and base with wrench (F) and wrench (H) (Figure 1.1
4. Put the water system in its proper position. Switch the lever to the level position and run water to the svstem slightly. Flush it for 3-5 minutes before the first use.

Tips: If there is water leakage at the connecting position between the faucet and the system, it is recommended to use a wrench to help tightening the nut on, or use the Teflon tape inside the instruction package to avoid leakage. If water still leaks, please put another 1.5mm sealing ring (in the package) on mounting base, then install it firmly to avoid leakage. NOTE: There may be a small amount of black water during the first use, don’t worry and this is a normal phenomenon because of the activated carbon. Please use the water after it becomes clear.

Use Method

1.  Switch the lever to the downward direction to get tap water. (Figure 1.3)
2. Switch the lever to the level direction to get the pure water. (Figure 1.4)

NOTE:

1. Before the first use, flush it for 3-5 minutes in the “pure water” position. Do not run water at a temperature higher than 100°F / 38°C. There may be a small amount of black water and the sound of water pushing air out of the filter during the first use. This is a normal phenomenon because of the activated carbon. Please use the water after it becomes clear.
2. Check for water leaking, please contact customer service instantly to get help when it happens.

Filter Replacement
For optimum performance, we recommend you use our original OEMIRY faucet replacement water filter. To keep water fresh and healthy, we advertise you to change your filter every 12 months or 8000 gallons, whichever comes first. This will vary based on your waste usage and water quality.

1. Place the system on the countertop, use wrench (F) and wrench (H) provided in the package to unscrew the filter housing and base.
2. Remove the expired filter from the system and insert the new filter into the base (C). Make sure the sealing ring is installed firmly.

Warnings

1.  Do not run water at a temperature higher than 100°F / 38°C.
2. flue or o5 minutes deform the 24 hours, run water for place before use.
3. Do not touch the filtered water outlet of the system in order to prevent bacteria from building up.
4. Protect the filter system from freezing temperature, frost, snow, sleet, and ice.
5. Clean the exterior of the system with a soft cloth to maintain its appearance and service life.
6. Replace the filter every 12 months or 8000 gallons for best filtration performance.

Frequently Asked Questions

1. Q: Why does the filtered water taste weird?
   A: The filter is not installed appropriately, or it should be replaced. Please re-install it in a correct way. If the taste is still bad, we suggest you replace a new filter.

2. Q: Why does the TDS value not lower after filtration?
   A: TDS stands for total dissolved solids. It is composed of inorganic salts and a small amount of organic matter. This system cannot lower the TDS value because it removes harmful substances while keeping beneficial trace elements, which can increase the TDS value.

3. Q: Why does water leak between the mounting base and the faucet?
   A: Remove the filtration system from the faucet and check it whether the O-ring at the connection is placed correctly. Ensure the thread between faucet and filtration system is screwed firmly so the O-ring can work.

4. Q: Why is the water leaking or dripping?
   A: Check it whether the selected adaptor is correct, or whether the adaptor sealing ring and the base sealing ring are installed firmly. Also check it if the spout (D) and the stainless-steel base (C) are installed in place. Flush the filter for 3-5 minutes to activate it, and there will not be water leaking or dripping.

Limited Warranty

The OEMIRY activated carbon block faucet filtration system ( model No: OM- CF01) offers 1-year warranty, which covers defects in materials and workmanship from the original date of purchase. If the product proves to be defective within 1 year from the date of purchase, please contact us get support via Customer Service Center. During the warranty period, we will replace or repair any part that is deemed to be defective if the product has not been subjected to tampering, alteration, or improper use after delivery, and has not been repaired by the manufacturer. The product is not warranted against misuse, use in abnormal temperature conditions, conditions listed outside the operating parameters, or use in commercial operations or any other manner outside the “system specification” set forth in the owner’s manual. Our obligation does not include the cost of transportation. We are not responsible for damage in transit; claims for such damage should be presented to the carrier by the customer.

NOTE: The warranty does not apply to any filter cartridge, which has a life expectancy that varies based on incoming water quality.

Online Technical Support:Beheal7@outlook.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>