yes RM148 5G Infinite Gateway User Guide

Quick Start Guide
Yes 5G Infinite Gateway

Your Yes SG Infinite Gateway

1. 12V
   Use this port to conned the power adapter to the power supply.

2. LAN
   Use this RJ 45 port to connect to your Ethernet device.

3. WPS
   Press and hold this button for 5 seconds to activate the WPS feature — to connect wireless devices without using WiFi Password.

4. USB
   Type C USB Port for diagnosis purposes only.

5. Power LED
   Indicates device power on/off status.

6. LAN LED
   Indicates device LAN status.

7. WiFi LED
   Indicates device Wi-Fi status.

8. Connection LED
   Indicates device connection status with the mobile network.

9. Signal LED
   Indicates receiving mobile network signal.

10. SIM Slot
    Slot to insert U-SIM card.

11. Reset Button
    Use a pin to push and hold this button for 5 seconds for a factory reset.

12. Device Label
    Information about the device such as model name, IMEI, and Wi-Fi information.

Setting up your Yes SC Infinite Gateway

Install SIM Card

1. Remove the SIM slot cover.

2. Install the SIM card into the spring-loaded SIM slot as directed. To remove the SIM, press the edge of the SIM inward and the SIM will pop out (please ensure that you use the Standard and not the Micro or Nano SIM).

3. Close the SIM cover.
   Connect Power Adaptor

4. Connect your power adaptor to the wall outlet.

5. Connect the power adaptor to the 12V port on the device. Note: Use only factory-supplied power adaptor to avoid harming the device and voiding the warranty.
   Connection with Wired or Wireless Devices

6. Use a LAN port to connect your wired device via Ethernet cable.

7. To connect using WiFi, scan the WiFi SSID name on the device label and enter the password.

No SIM card or failed to detect SIM card.
OFF| —| No Signal
Connection | ON| Green| The device is connected to the mobile network
Blinking| Green| The device is trying to connect to the mobile network
OFF| —| The device is disconnected from the mobile network
WiFi | ON| Green| WiFi is turned on
OFF| —| WiFi is turned off
LAN | ON| Green| LAN port is active
OFF| —| LAN port is inactive
Power | ON| Green| The device is powered on
OFF| —| The device is powered off

Setup Using Browser
You can access your Yes 5G Infinite Gateway Web Interface to view device status and change the settings.

1. Connect to the Yes 5G Infinite Gateway over WiFi or LAN.
2. Use any web browser and enter http://192.168.0.1
3. The login username is “admin”.
4. Password can be found on the device label.
5. From the HOME menu, you can view your device information and network status.
6. If the network status is showing connected and you can see the IP address under Internet status. That indicates that the Yes 5G Infinite Gateway is connected to the mobile network and ready to use.
7. For WiFi-related settings such as SSID Name and Password, go to SETTINGS > WiFi Settings.

Factory Reset
To reset your Yes 5G Infinite Gateway to factory default:

1. Make sure your Yes 5G Infinite Gateway is powered on.
2. Insert a pin into the Reset pinhole, push down and hold for 5 seconds.
3. The device will reboot to factory settings.

Using Web Interface

1. Make sure your Yes 5G Infinite Gateway is powered on and you have access to Web Interface.
2. Goto Systems > Backup and Restore
3. Click the Restore Factory Defaults button.

The device will then restore the factory defaults and reboot.
Note: Make sure the power adaptor is connected to the Yes 5G Infinite Gateway during the entire reset process.

FAQ:

The Power LED indicator is not ON.****

– Check if the Power adapter is plugged properly into the AC socket.
– Check power adapter is connected to the device properly.
– Note: Use only provided factory-supplied Power Adaptor

Web Interface cannot be accessed****

– Ensure that the device is powered on.
– Ensure that your device is connected over a wired or wireless connection.
– Try using a different browser or try to clear the browser cache.
– Restart or factory reset the device.

The device cannot access the network****

– Ensure your U-SIM card is valid and active.
– If the Connection LED is OFF, log in to Web Interface and check the network status.
– If the network status is “disconnected” or “connecting”, check network parameters RSRP value — it must be greater than -115dBm.

For any support & query:
Our website: www.yes.my/support/contact-us
Or email us: [email protected]
YTL Communications All Rights Reserved

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>