Yingda F100 Portable Projector User Manual

Yingda F100 Portable Projector

Specifications

• Compliance: FCC Part 15
• Radiation Exposure Limits: FCC Compliant
• Minimum Distance: 20cm between radiator and body

Safety Precautions

1. Any unauthorized changes to the device may void its operation authorization.
2. Maintain a minimum distance of 20cm between the device radiator and your body.

Installation

1. Place the device on a stable surface.
2. Ensure there is at least 20cm of space between the device radiator and your body.
3. Connect the device to a power source following the provided instructions.

Operation

1. Power on the device using the designated button or switch.
2. Follow the specific instructions for the intended use of the device.
3. In case of any interference, ensure the device is accepting it as per FCC regulations.

FAQ
Q: What should I do if I encounter interference while using the device?
A: Make sure the device is accepting any interference as required by FCC regulations. Check for any nearby sources of interference and try to minimize them.

User Manual

Attention
Please read this manual carefully before use and keep it for future reference.

1. The projector is non dustproof or waterproof.
2. In order to reduce the risk of fire and electric shock, do not expose the projector to rain and fog.
3. Please use the original power adapter. The projector should work under a specified rated power supply.
4. When the projector is working, please do not look directly into the lens, the strong light will flash your eyes and cause slight pain. Children should use the projector under the supervision of adults.
5. Do not cover the vents of the projector. Heating will reduce the life of the projector and cause danger.
6. Regularly clean projector vents, or dust may cause cooling malfunctions.
7. Do not use the projector in a greasy, damp, dusty or smoky environment. Oil or chemicals will cause malfunction.
8. Please handle it with care during daily use.
9.  Please cut off the power if the projector is out of use for long time.
10.  Non-professionals are forbidden to disassemble the projector for testing and maintenance.

Structure Description

This manual is for reference only. It is subject to change without prior notice. Hotac reserves the of final interpretation.

Remote Component and Functions

Power ON/OFF

Power On Long
press the Power button on projector for 3 seconds.

Power Off
When the projector is powered on, press and hold the power button on the projector or the remote control for 3s to power off.

Focus Adjustment

When the projector is on, adjust sharpness by focusing the wheel on the back of the projector.

Launcher Ui

Wi-Fi
Wifi Setting > To choose the network and type the password that you want to connect to.

BT Setting
BT setting, BT”ON*, click Refresh Device and choose an objective device to pair.

About this machine
Setting-Device Preferences-About.Local machine information can be viewed

Application
Hone page-ly Apps. All installed can be viewed

OSD Language
Setting-Device Preferences-LanguangeTo choose your language Language

Home Background
Hone page-Frojector Setting-WallpapersChoose the Home Background you want.

Projector Mode
Home page-Projector Setting-Keystone Adjust-Frojection ode > To select different modes according to your application scenario. Four modes are available ‹ Front Table, Front Ceiling, Back Table. Back Ceiling >.

Factory Restore
Setting-Device Preferences-Reset > To reset system. he user data will be cleared.

Trapezoid Home
page-Projector Setting-Keystone Adjust- Trapezoid›You can adjust the four points of the picture separately to ensure that the picture achieves the

Media Player
Insert the U disk and click the USB icon on the homepage to read the local video & music & photo & Book.

HDMI Signal
Connect projector and external sourcing device by HDMI cable. Enter HDMi on the homepage, the signal from the sourcing device will be transmitted to projector and cast out.

Wireless Screen
(The Android Mobile/Pad must be on the same network as the projector device.)

1. Open the settings menu on your Android Mobile/Pad. ios
2. Access your display settings or screen mirroring.
3. Select the device name

ios

DLNA
(The phone/Pad must be on the same network as the projector device.)

iOS
Cast iOS Cast AP Connect with iOS Phone via screen mirroring:

1. Open WIFl and find the device name from your phone. Then input the password on your phone.
2. Click Airplay/Screen mirroring on your phone and connect the projector.

iOS
Cast (The phone/Pad must be on the same network as the projector device.)

1. Open your iPhone Control Centre and select Screen Mirroring.
2. Click the device name

(Safety instructions]

• Please pay attention to important information related to the operation and maintenance of the projector. You should read this information carefully to avoid problems. Following safety instructions will increase the life of projector.
• Please consult the qualified personnel for installation and repair services, and do not use damaged wires, accessories and other peripherals.
• Projector should be kept away from flammable, explosive, strong electromagnetic interference (large radar stations, power stations, substations) , etc. Strong ambient light (avoid direct sunlight), etc.
• Do not cover projector vents.
• Please use the original power adapter.
• Keep adequate ventilation and make sure vents are not covered to avoid projector overheating.
• When projector is working, please do not look directly into the lens, the strong light will flash your eyes and cause slight pain.
• Do not bend or drag the power cord.
• Do not put power cord under projector or any heavy objects.
• Do not cover other soft materials on power cord.
• Do not heat the power cord.
• Avoid touching power adaptor with wet hands.

(Disclaim]

This manual is general instructions, The pictures and functions in this manual should subject to the actual product. Our company is devoting to improve product performance, we reserve the right to modify product functions and interface described in this manual without notice. Please keep your device properly.We are not responsible for any loss caused by wrong operation of software/hardware or repairing or any other reasons. We are not responsible for any loss of any third party claims. This manual has been carefully checked by professional engineer, please understand for any inevitable omissions.

Attention:
Please do not look directly into the lens when projecting to prevent the strong light doing harm to your eyes. Kids should use the projector under the supervision of adults.

FCC Warning:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference e to radio or television reception, which can be determined by turning the equipmentoff and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>