YYSWIE CT1001 Tablet PC User Manual
- June 15, 2024
- YYSWIE
Table of Contents
YYSWIE CT1001 Tablet PC
Product Information
Specifications
- Product Name: [Product Name]
- Model Number: [Model Number]
- SAR Level: [SAR Level]
- Operating Frequency Bands: [Frequency Bands]
- Power Levels: [Power Levels]
Product Usage Instructions
General Safety Guidelines
Before using the product, please read and understand the following safety guidelines:
- Keep the product away from water and other liquids.
- Avoid exposing the product to extreme temperatures.
- Do not use the product near flammable materials.
- Keep the product out of reach of children.
- Only use accessories and batteries recommended by the manufacturer.
Specific Absorption Rate (SAR) Information
The Specific Absorption Rate (SAR) measures the rate at which the body absorbs radiofrequency energy from the product. It is an indicator of the maximum exposure level to electromagnetic radiation. The SAR tests conducted for this product were done using standard operating positions accepted by the FCC (Federal Communications Commission).
SAR Level Explanation
The SAR level mentioned in the user manual represents the highest certified
power level at which the tests were conducted. However, during normal
operation, the actual SAR level of the phone can be well below this maximum
value.
Proximity to the Product
The SAR level can vary depending on your proximity to the product. In general,
the closer you are to the product, the higher the SAR level. It is advisable
to maintain a safe distance from the product to minimize exposure to
electromagnetic radiation.
Product Usage
Follow these instructions to ensure safe and effective use of the product:
Step 1: Charging
Before using the product for the first time, ensure that it is fully charged.
Connect the provided charger to the product and plug it into a power outlet.
Allow the product to charge until the battery is full.
Step 2: Powering On/Off
To power on the product, press and hold the power button until the device
vibrates or the screen turns on. To power off, press and hold the power button
again until the device vibrates or the screen turns off.
Step 3: Making Calls
To make a call, unlock the device (if necessary) and open the phone
application. Enter the desired phone number using the keypad or select a
contact from the address book. Press the call button to initiate the call.
Step 4: Receiving Calls
When receiving a call, you will be notified through a ringing sound or
vibration. To answer the call, swipe the answer icon on the screen. To reject
the call, swipe the reject icon.
Step 5: Adjusting Settings
You can adjust various settings of the product by accessing the settings menu.
This includes options such as Wi-Fi, Bluetooth, sound, display, and more.
Refer to the user manual for detailed instructions on specific settings.
Frequently Asked Questions (FAQ)
Q1: What is SAR?
A1: SAR stands for Specific Absorption Rate. It measures the rate at
which the body absorbs radiofrequency energy from a product.
Q2: Is the SAR level mentioned in the user manual safe?
A2: Yes, the SAR level mentioned in the user manual represents the
highest certified power level at which the tests were conducted. However,
during normal operation, the actual SAR level of the phone can be well below
this maximum value.
Q3: How can I minimize my exposure to electromagnetic radiation?
A3: To minimize your exposure to electromagnetic radiation, maintain a
safe distance from the product, use hands-free options when possible, and
limit the duration of your calls.
Attention
- Avoid do poing or tie dely in in emp nature, me, sure, could use paorma or physical damage to the display screen.
- Please charge the device under the following conditions:
- When the battery power icon shows no power.
- When the system automatically shuts off and needs to be restarted soon after.
- When the operation buttons are unresponsive.
- When a red icon appears in the top right corner of the device.
- When the device is in the process of formatting or uploading and downloading files, please do not suddenly disconnect, as this could cause application errors.
- Do not disassemble the product, and refrain from using alcohol, thinner, or benzene to clean the device.
- Only use the pre-installed software on the machine. For additional software support, please contact us.
Main Function
- Operation Systems: Android™ 13
- Processor: A523
- CPU Processor Speed: 64-Bit Octa 4 Cortex-A73 + 4 Cortex-A53 2.0GHz
- EMMC: 64GB
- RAM: 4GB
- WI-FI Function: 802.11b/g/n/ac/ax
- Bluetooth: 5.2
- TF Card: up to 512GB
- Display Screen: 10. linch Capacitive Multi-touch
- Resolution: 1280*800 IPS
- Dual Camera: Front: 5.0M Pixels; Rear: 8.0M Pixels
- Battery and Capacity: Rechargeable built-in type polymer battery, 3.8 V/7000mAh
- USB: 2.0
- G-sensor 3D
- Support Speaker
- Record: Built-in microphone
- MIC Phone: Input
- Video:DIVX4/DIVX5/DIVX6/DIVXHD/XVID/MPEG-4 SP/ASP/MPEG2/HEVC/Sorenson Н.263/H.263/VP9/H.264
- Audio: WAV, MP3, MP2, AAC, AMRNB, AMR-WB, MIDI, Vorbis, APE, AAC-plus v1,AAC-plus v2, FLAC, WMA, ADPCM
- Pictures: JPG, JPEG, BMP, and PNG
- Recording Function: Format supported 3ga Format
- 3G Function: Support external 3G USB-DONGLE wireless network
- E-book Function: Format Supported: TXT,EPUB,PDF,WORD,EXCEL,PPT
- Working Temperature: -5-40°C
- Languages:Chinese, English, Japanese , French, German, Spanish, Russian, etc.
The company reserves the right to make improvements to the product. Product specifications and design are subject to change, and the information is subject to updates without prior notice.
Appearance and Button
- Power Button
- TYPE-C
- Volume Buttons
- TF Card
- Rear Camera
- Reset Button
- Headphone Jack
- Speakers
First Use
Battery Management and Charging
Before the first use, please ensure to charge the device’s battery to 100%.
For the first two charging cycles, it is recommended to keep the device
charging for approximately 6 hours.
After that, you can charge it for around 4 hours or until it is fully charged.
Note: This tablet utilizes a built-in polymer battery. When charging, please use a standard adapter (Power Supply Adaptor- DC 5V 3A; Adaptor Technical Data – Input: AC100-240V,50/60Hz, DC5V 3A).
Connection with a PC
To connect the device to a PC, please follow these steps:
- Turn on she debie to connect it to the PC.
- On the notification bar, click on the USB connection window.
- Lastly, enable “Transfer Files” to establish a connection with the PC.
- In the loading mode, you can copy and delete files both on the device and on the memory card.
Equipment Operation Interface
Main Interface Description
Upon startup, you will enter the main interface. In the main interface, you
have the ability to manage software icons by performing the following actions:
-
To rearrange icons: Long-press an icon for 3 seconds. Once the icon enlarges, you can drag it to any desired location on the interface.
-
To delete icons: Long-press an icon for 3 seconds, then drag it to the Recycle Bin icon.
When the Recycle Bin icon turns red, release the icon, and the respective app will be deleted. -
To change the wallpaper: Go to “Settings” > “Display” > “Wallpapers” and select the desired wallpaper from the available options.
Status Bar Description
The top right of the screen displays various information on the status bar,
including battery status, battery charge icons, current time, and access to
the Settings Menu.
Using the Touch Panel
Regardless of the interface you are in, you can navigate back to the main
screen by pressing the soft key located in the bottom middle corner of the
main screen.
In different applications, tapping the back soft key in the bottom middle
corner of the touch screen allows you to return to the previous interface
within that specific application.
Equipment Basic Setting
Click the setting icons to enter the setting Interfaces.
Sound Volume
Application
Manage Applications:
- Enter “Settings” > “Apps & Notifications,” and you will see a list of apps.
- Select the app you want to uninstall, and it will take you to the following interface.
- Click on “Uninstall,” and you will be able to delete the application.
Reset Options
Please navigate to the following path: “Settings” > “System” > “Reset Options”
“Erase all data (factory reset)” > “Erase all data”.
Storage
Remove the TF card to view the available storage space.
Note: Please tap on the “Delete TF card” option to safely remove the TF card.
Language & Keyboard
Super tamed age: s ins trainal in tiagesire available.
Date & Time Settings
Set the date, time, time zone, and date format in this section.
About Tablet
To access information about the tablet, go to “Settings” > “System” > “About
Tablet”.
File Manager
The tales and as copid po the is FLATor Tes. Most apps can be insalled from Open the “Files Go” app to check and manage apps, images, videos, audio, and documents.
Problem Solutions
Device can’t be turned on
- Check the battery power.
- Connect the adaptor first, then check again.
- Press the “reset” key first, then press the “power” key.
- If the device still can’t be turned on after charging, please contact the supplier.
Device shuts down after startup
If the device shuts down after the screen or the Power On Image appears, it
indicates low power. Please charge the device.
Headset can’t produce sound
- Please check if the volume is set to 0.
- Check if the music file is damaged. Try playing another audio file.
- Damaged files may result in serious noise or popping sounds.
Unable to copy files or play music
- Please check if the computer and device are correctly connected.
- Check if the memory storage space is full.
- Check if the USB cable is in good condition.
- Ensure that the USB connection is not disconnected.
Forgot the password
- Hold down the POWER and Volume “-” keys simultaneously for 5-8 seconds.
- Release the volume key when the device enters factory mode, then continue using the volume reduction key to select “Clear eMMC,” and confirm with the power key.
- Wait for approximately one minute for the welcome screen to appear, and then re-enter the Android system.
Warning
Any changes or modifications not expressly approved by the party responsible
for compliance may void the user’s authority to operate the equipment.
- This device complies with Partasion is sueR the following two conditions:
- This device must accuse intererence, including interference that may cause undesired operation of the device.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, as outlined in Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in residential installations. This equipment generates, uses, and can emit radio frequency energy. If not installed and used in accordance with the instructions, it may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try correcting the interference using one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the distance between the equipment and the receiver.
- Connect the equipment to an outlet on a different circuit than the one to which the receiver is connected.
- Seek assistance from the dealer or an experienced radio/TV technician.
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.
Specific Absorption Rate (SAR) information
SAR tests are conducted using standard operating positions accepted by the FCC
with the device transmitting at its highest certified power level in all
tested frequency bands, although the SAR is determined at the highest
certified power level, the actual SAR level of the phone while operating can
be well below the maximum value, in general, the closer you are to a wireless
base station antenna, the lower the power output.
Before a new model device is a available for sale to the public, it must be
tested and certified to the FCC that it does not exceed the exposure limit
established by the FCC, Tests for each phone are performed in positions and
locations (e.g. at the ear and worn on the body)as required by the FCC
For body worn operation, this model has been tested and meets the FCC RF
exposure guidelines when used with an accessory designated for this product or
when used with an accessory.
WARRANTY CARD
Model Name
Product Serial No.
Date of Purchase
dd
mm
YY
Customer’s Details
Name
Address in Full.
Telephone No..
Dealer Name & Address.
Customer’s Signature & Date
Dealer’s signature with rubber stamp
CONTACT INFORMATION
reenex803@outlook.com
www.yyswie.com
The emissions are maintained within the band of operation under all conditions of normal operation
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>