MADIGI MPC43 Mini PC User Manual
- June 12, 2024
- MADIGI
Table of Contents
MADIGI MPC43 Mini PC
Product Information
The MPC43 is a Mini PC manufactured by Shenzhen MADIGI Electronic Technology Co., Ltd. It is designed for business clients and digital signage applications. The Mini PC features multiple outputs (OUTPUT 1, OUTPUT 2, OUTPUT 3, OUTPUT 4) that support either 12V or 19V electric power. It also includes various ports such as USB 3.2 Gen2 Port, USB 2.0 Port, Ethernet Port, HDMI Port, and Display Port.
The device is equipped with WLAN, Bluetooth BR/EDR, Bluetooth BLE, and RLAN technologies. It operates within specific frequency ranges (MHz) for different functions, including 2412-2472 MHz, 2402-2480 MHz, 5150-5250 MHz, 5250-5350 MHz, 5470-5725 MHz, 5745-5825 MHz, and 5945-6425 MHz. The RF power output varies depending on the frequency range. The MPC43 complies with Directive 2014/53/EU and FCC Part 15 regulations. It meets FCC radiation exposure limits and maintains frequency stability within the specified U-NII bands.
Product Overview
Description
- USB 3.2 Gen2 Port
- Display Port
- HDMI Port
- Ethernet Port
- USB 2.0 Port
- Electric Power lnlet
- RESET
- Power Button/LED
- Anti-Theft Key Lock Hole
Installation Instructions
M.2 SSD
Safety and Caution Information
- AC Power Adapter: Risk of electric shock, fire, or burn if using an AC adapter other than the one provided with this device. Indoor use only and in dry locations. Device must only be repaired by a professional. Do not open enclosure. The adapter is rated for use between 0 ‘C and 35 C (32 F and 95 ‘F). Connect only to a properly wired and grounded outlet. 19V, 6.32A, 120W
- Risk of explosion if the battery is replaced with an incorrect type. Batteries should be recycled where possible. Disposal of used batteries must be in accordance with local environmental regulations.
- Failure to use the included power adapter shall violate regulatory compliance requirements and may expose the user to safety hazards.
- Temperature: This device is intended for use in ambient temperatures between 0°C and 35°C (32°F and 95 ‘F). Avoid using or storing next to heat sources, in direct sunlight, or outside the intended temperature ranges.
- Medical: This device may interfere with the operation of some pacemakers, hearing aids or other medical devices. To reduce the risk, maintain a separation distance of 20 cm (8 inches) between the device and the medical device. Refer to the medical device for additional information.
- Modify: Modification of the wireless solution, thermal solution, device components or enclosure shall violate regulatory compliance requirements and may induce safety hazards.
Hereby, Shenzhen MADIGI Electronic Technology Co., Ltd declares that the radio equipment type Mini PC is in compliance with Directive 2014/53/EU.
Specifications
Technology
| Frequency MHz|
RF Power
---|---|---
From| To
WLAN| 2412| 2472| 19.7dBm
Bluetooth BR/EDR| 2402| 2480| 13.1dBm
Bluetooth BLE| 2402| 2480| 10.0dBm
RLAN| 5150| 5250| 23.0dBm
RLAN| 5250| 5350| 23.0dBm
RLAN| 5470| 5725| 23.0dBm
SRD| 5745| 5825| 13.9dBm
6GHz RLAN| 5945| 6425| 22.97dBm
FCC STATEMENT
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference.
- this device must accept any interference received, including interference that may cause undesired operation.
FCC RF Exposure Warning Statements:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment shall be installed and operated with
minimum distance 20cm between the radiator & body.
The frequency stability of all transmission frequencies of U-NII-1, U-NII-2A,
U-NII-2C ,U-NII -3, U-NII 5, U-NII 6, U-NII 7 and U-NII 8 meets the 47 CFR FCC
Part15.407(g) requirements, and the manufacturer states that their
transmissions remain within the U-NII-1, U-NII-2A, U-NII-2C ,U-NII -3, U-NII
5, U-NII 6, U-NII 7 and U-NII 8 bands.
Connect to a Network
- Click the network icon in the notification area in Windows. A list of available wireless neworks will be shown.
- Select the desired network,input the information (if needed).
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>