GRECELL GR-SE0005 Portable Power Station User Manual

GRECELL GR-SE0005 Portable Power Station User Manual

Thanks for your purchase from GRECELL.
For the best performance and safety purposes, please read this manual carefully beforeuse. Please keep this manual for further reference.

**CHARGE FIRST!
** Please fully charge your new 2000 W Power Station before first use. Highly recommend charging 2000W Power Station when battery indicates less than 20%.

Product Overview

Buttons Function

• Power On/Off Control Button
  This button is the master switch. Long press it to turn on the power or to shut down the output(s) when not in use.

• LED Light Control Button
  Operate method: short press to turn on and change the light mode (light/SOS). Long press the button for 1-2 seconds to turn off the LED light.

• USB Control Button
  Make sure the button “Power On/Off” is activated before pressing this button to turn on.
  Operate method: short press to turn on/off.

| |
---|---|---
USB-Ax 2 5V/2.4A| USB-A x 2 QC3.0-18W| TYPE-C x 2 PD-100W

• DC Control Button
  Make sure the button “ Power On/Off ” is activated before pressing this button to turn on.

• Operate method: short press to turn on/off.

| |
---|---|---
Output x 2 12V/3A| Cigar Lighter x 1 12V/10A| XT60 x 1 12V/25A

• LCD Screen Display
  Present the remaining power and use data. And the LCD Screen will enter Sleep Mode after the 30s of inactivity and will Wake up when inputting a charging cord or when any button is pressed.

• Air Intake/Outlet (built-in cooling fan)
  2001A utilizes an internal cooling fan to ensure the product operates within the appropriate temperature range. 2001A, when it experiences a higher output load, will automatically turn on the fan during discharge or recharging; the fan may operate intermittently to keep the internal temperature within operating range. The fan will likely start when the AC circuit is activated to ensure proper operation.

• AC Control Button (50Hz/60Hz Switching Control)
  Make sure the button * Power On/Off ” is activated before pressing this button to turn on.
  Operate method: short press to turn on/off.
  Notice:

1. Please confirm the output voltage or frequency before using.
2. Long press the button for 2s to enter the frequency changing mode, 50Hz, and 60Hz will flash in the display, press again the button to choose the right frequency, wait till the frequency is not flashing, then you will get the frequency you want.
3. Quick short press 10 times to switch the voltage to 100V or 110V.

• PV Input
  Use the included Anderson to MC4 conversion cable to connect the solar panel.
  As for PV input, the maximum input of the solar panels is up to 500W and the maximum voltage is up to 50V.

• AC Input
  Use the included wall socket to get 1100W fast charging, which can fully charge from 0 to 100% in 2 hours.
  Notice:

1. The product can be charged directly by the wall socket; please do not use extension cords and cable taps. When charging, do not plug other products in the same socket.
2. Please do not plug several devices together in an extension socket at once; the current will be too high and bring damage to the cable and dire risk.
3. Do not use the same socket to connect other devices when charging this product. When the same wiring in a general household exceeds 1500V, it will activate the safety circuit breaker. w

• Overload Protection
  Prevent damage to the product due to excessive AC input current caused by lightning and power grid fluctuations. When such a situation occurs, the overload protector will cut off the AC input to protect the product. Restore the AC input function of the product in the following sequence.

1. Turn off the power button and unplug all ports.
2. After confirming that all parts are standard, turn on the power button.
3. Press the overload protection button to switch on the AC line to restore AC input.

LCD Features

1. Remaining discharge time
2. Fan status
3. High/low temperature
4. Battery level indicator
5. Total input power
6. Total output power
7. LED light status
8. AC output status
9. Type-C output status
10. USB output status
11. AC charging status
12. Anderson charging status
13. DC output status
14. Cigarette lighter output status
15. XT-60 output status

Display Attention

 Please keep the air intake/outlet unobstructed when this icon lights up.

When this icon lights up, please note the device is now with high/low temperature and will  possibly stop working till the temperature is back to the usual standard.

 When this icon is flashing, it represents that the AC input is at fault; please recheck the power/Hz/cable.

 When the icon is blinking, i represent the @ output is fault, please recheck.

UPS Mode

• UPS Function
  This product has the bypass mode, does not need to pass through the battery, can directly output from the AC. In UPS mode, when the AC input power of the mains is cut off due to a power outage, the ac input power of the mains can be used in about automatic switch to the product battery within 10 ms to ensure AC output.

• UPS Connections
  As shown in the figure below, connect the product between the socket on the wall and the electrical appliances, and the power of the product is in the ON state. When you turn on the power of the electrical appliances, it will directly use the AC power of the power grid.

In this state, when the power grid is cut off, it will automatically switch to the product’s internal battery to supply power.
In UPS mode, the maximum power output of AC is below 1100W.
In UPS mode, if the AC output exceeds 1100W, the AC output icon”@”will blink, indicating overload.

Accessory List

• Anderson to MC4 Cable

• AC Charger

• Car Charger

• User Manual

• Cable Storage Bag

Recommend to use 2*200W Solar panel (not included).

General Specifications

General Specs
Rated Capacity: 1997Wh
Weight (including accessories): =23kg
Net Weight: =22kg
Product Size: 392279323mm

Input
Recharging Input Voltage: 100V-120V
Solar Charge Input: 11.5-50V
Recharging Input Power: 1100W
Car Charger: 12/24V

Output
AC Output Voltage: 100V-120V~50-60Hz
*DC 552.1 Output: 12V = 3A
Rated Output Power: 2000W
Output Waveform: Pure Sine Wave
USB Output: 12W
USB 3.0 Output: 18W
Type-C Output: PD100W
Car Port Output: 12V == 10A
XT60 Output: 12V ==25A
Overload Protection Power: 2100W
LED Light Output:** 1W

Battery
Battery Type: 32130 LiFePo4
Charging Temp: 0-40°C
Operating Temp: -10 to 40°C
Storage Temp: -10-40°C

Solar Panel Charging

1. Do not charge the unit via a solar panel that operates voltage exceeding 50V.
2. Support 500W max solar input (solar panels not included); the charging time depends on the solar light intensity. If the solar panels produce 400 watts of power then it can be fully charged within 5 hours.

Connecting Pattern

AC Charger Charging

Please use the AC charger that we provided to charge this unit, it will only need 2 hours to fully charge the device.

Car Charger Charging

Please use the car charger that we provided to charge this unit, and car charging is usually low power of 90-120W, so the charging time will be long. If you need a quick charge, it is recommended to use the AC adapter.

Fault Resolution

Above icons flash and buzz.

|

Output exceeds the standard (short circuit).

| Remove the output device.
2. Check whether the overload
protector is activated. If it is
activated, press the overload
protection button, press the
AC output button.
3. If the overload protector does and buzz. not spring up, directly press
AC output to restore the
output function.
The temperature warning icon flashes and buzzes.| The temperature of this product has exceeded the appropriate temperature.| Remove the equipment, turn off the power of this product, and wait for the equipment to reach the appropriate temperature.

Charging unavailable.

| Bad wire connection.| Confirm the connection status of the line and the power supply status
Overload protection function activated.| Turn off the power button and
remove cables from all ports.
2. After verifying that all components
are normal, turn on the power
button.
3. Press the overload protection
button to connect the AC cable
to recover AC input.

Warning

1. lease avoid using the product near high temperature, high humidity, direct sun environment and fireplace.
2. Do not disassemble or modify this product; it will cause malfunction and fire.
3. Please discard or recycle the product according to the methods prescribed by local laws.
4. Be careful not to drop the product from a high place and give the product a strong impact.
5. Keep or use the product in a place out of the reach of children.
6. Please use our company’s genuine accessories. The damage caused by non-genuine supplements cannot be repaired free of charge.
7. Please leave a space of about 30cm away from the side suction and exhaust ports not to affect the product’s heat dissipation.
8. When not using this product, please turn off the power and unplug the power cord. Please avoid storing the product in a place exposed to direct sunlight with high temperature and humidity.
9. For long-term storage, please consume power from full power to no power once every three months and then recharge to about 50%.
10. Please do not use this product and its accessory cables and connecting equipment when there is a defect.
11. Please do not store the product for a long time in highly high and low-temperature places such as in the car and the field warehouse to avoid shortening the battery life.

Note:
A photovoltaic panel as input for charging the internal battery shall be provided with an inverter and/or a charge controller in accordance with UL 1741 or UL 62109-1; The external power supply shall be a power source in accordance with the Standard UL 60950-1 and CAN/CSA C22.2 No. 60950-1, or UL 1310 and No. 1, CAN/CSA C22.2 No. 223, or No.1, CAN/CSA C22.2 No. 223; A vehicle adapter that complies with the enclosure and input contacts requirements in the Standard for Vehicle Battery Adapters, UL 2089, and Power Supplies, CAN/CSA C22.2 No. 107.1. The connector plug shall incorporate a fuse or other protective device having a current rating not greater than 15 A.
INSTRUCTIONS PERTAINING TO RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS.
IMPORTANT SAFETY INSTRUCTIONS

1. WARNING — When using this product, basic precautions should always be followed, including the following:
   a) Read all the instructions before using the product.
   b) To reduce the risk of injury, close supervision is necessary when the product is used near children.
   c) Do not put fingers or hands into the product.
   d) Use of an attachment not recommended or sold by power pack manufacturer may result in a risk of fire, electric shock, or injury to persons.
   e) To reduce the risk of damage to the electric plug and cord, pull the plug rather than the cord when disconnecting the power pack.
   f) Do not use a battery pack or appliance that is damaged or modified. Damaged or modified batteries may exhibit unpredictable behavior resulting in fire, explosion, or risk of injury.
   g) Do not operate the power pack with a damaged cord or plug, or a damaged output cable.
   h) Do not disassemble the power pack, take it to a qualified service person when service or repair is required. Incorrect reassembly may result in a risk of fire or electric shock.
   i) To reduce the risk of electric shock, unplug the power pack from the outlet before attempting any instructed servicing.

j) WARNING — RISK OF EXPLOSIVE GASES.

1. To reduce the risk of battery explosion, follow these instructions and those published by the battery manufacturer and manufacturer of any equipment you intend to use in the vicinity of the battery. Review cautionary marking on these products and on engines.

k) PERSONAL PRECAUTIONS

1. Have plenty of fresh water and soap nearby in case battery acid contacts skin, clothing, or eyes.
2. Wear complete eye protection and clothing protection. Avoid touching eyes while working near the battery.
3. If battery acid contacts skin or clothing, wash immediately with soap and water. If acid enters the eye, immediately flood the eye with running cold water for at least 10 minutes and get medical attention immediately.
4. NEVER smoke or allow a spark or flame in the vicinity of the battery or engine.
5. Be extra cautious to reduce the risk of dropping a metal tool onto the battery. It might spark or short-circuit battery or other electrical parts that may cause an explosion.

l) When charging the internal battery, work in a well-ventilated area and do not restrict ventilation in any way.
m) Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help. Liquid ejected from the battery may cause irritation or burns.
n) Do not expose a power pack to fire or excessive temperature. Exposure to fire or temperature above 130°C may cause an explosion. The temperature of 130°C can be replaced by the temperature of 265°F.
0) Have servicing performed by a qualified repair person using only identical replacement parts. This will ensure that the safety of the product is maintained.
SAVE THESE INSTRUCTIONS.

Disposal/Recycle

Do not place equipment and its accessories in the trash. Items must be properly disposed of following local regulations. See www.epa.gov for additional information.

Warranty

All GRECELL products come with a full 2-year limited warranty from the date of purchase (accessories excluded). It will be out of guarantee if damaged due to incorrect use or force majeure.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>