Meridian jX60 3D Active Glasses User Manual

3D Active Glasses
User Manual

Bluetooth Transfer 3D Signal Applied to 3D Display Device

Product Overview

Thank you for choosing 3D active glasses. The glasses is one device enables you Lo enjoy your 3D vision. When using the glasses with a 3D display device that supports the 3D function via bluetooth way. You can enjoy realistic, vivid 3D images.

Parts and Components

Supported 3d Device

Bluetooth Transfer 3D Signal Applied to 3D Display Device.

Active Glasses

On Bution:
Pairing 3D Active Glasses
What s pairing? Pairing s a process of connecting 3D glasses and a 3D display device so that the two devices can exchange data
Ensure your 3D display device and 30 glasses are no farther than 19.5inch (‘1m )apart from each another while pairing is in progress.
Turning the glasses on
Press the power bution briefly. The green LED s turned on for 3 seconds. (Make sure that 3D is activated on the 3D display device before using the 30 glasses.)
Tirming the glasses off
Press the power button briefly.
When the giasses s on
Performing the pairing process
The green LED will blink in progress.

• Indicator Light
• LCD Lens
• Rechargeable glasses:
  3D Shutter glasses can work for approximately 35-hours full charge

Tips:

If press the power button, the LED can’t blink ;mean that battery need to be charged for recharged glasses, or need to change another new Li-M dioxide (cr1632)
Pairing steps:

1. Turn on the 3D display device and then move the glasses within 19.5inches(50cm)of the 3D display device,
2. Press the power button on the 3D glasses briefly. The 3D glasses will power on and pairing will start.
3. The message 3D glasses are connected to TV”.will be displayed on the screen when pairing is successfully completed for some band of display device. But there ar not the message will be displayed on the screen when pairing successfully, if you see screen also can enjoy 3D) vision, it also means that pairing is successfully cempleted for some band of display device
    If ihe pairing failed, the 3D glasses willpowor off
   If the first attempt to pair fails, power the TV off and on again and perform step2
   How to pair again: Press the power button on the. glasses for mare acol

Operating range:

Note: Tha 3D acive glasses are designed o it ver mos standard gasses.

Change battery or Recharge battery

Charge Li-con battery way (Rechargeable glasses):

Warm Reminder: If you leave the 3D glasses for along time, it’s recommended tofully charge the 3D glasses first, o avoid a long-term non-use and the battery remains dead, otherwise the 3D glasses willnolonger be charged and damaged.

3D Viewing Guidelines

• When watching 3D images under a fluorescent lamp (50Hz~60Hz) or a 3 wavelength lamp, you may notice 2 small amount of screen flickering. If so, dim the light orturn the lamp off.
• If you change the channel disconnected due to either a change in the viewing angle or distance, the 3D glasses tum off automatically.
• If the TV Emitier becames disconnected due to either a change in the viewing angle or distance, the 3D glasses turn off automatically.
• The 3D aciive glasses may not work properly if there is any other 3D product or electronic devices turned on near the glasses or TV.
• Be sure to stay within the viewing angle and optimum TV viewing distance when watching 3D pictures.
• Otherise, you may not be able o enjoy proper 3D effects.
• If you lie on your side while watching TV with 3D active glasses, the picture may look dark or may not be visible

CAUTION

IMPORTANT HEALTH AND SAFETY INFORMATION FOR 3D PICTURES READ THE FOLLOWING WARNINGS BEFORE YOU OR YOUR CHILD USES THE 3D FUNCTION.

• Aresponsible adult should frequently check on children who are using the 3D function. If there are any reports oftired eyes, headaches, dizziness, or nausea, have the child stop viewing 3D TV and rest.
• Do not use the 3D active glasses for other purpose ( such as general sysglasses, sunglasses, protective goggles, etc)
• Some viewers may experience discomfort while viewing 3D TV such as dizziness, nausea and headaches. Ifyou experience any such symptom, stop viewing 3D TV, remove 3D active glasses and rest
• Watching 3D images for an extended period of time may. cause eye strain. If you feel eye strain, stop viewing 3D TV. remove your 3D active glasses and rest
• Do not use the 3D function or 3D active glasses while walking or moving around. Using the 3D function or 3D function or 3D active glasses while moving around may resultininjuries due to running into objects, tripping. andi or falling
• Please periodically charge the 30 glasses Ifyou purchase the rechargeable glasses

Troubles hooting

➢ glasses, or change a new battery for
➢ Focus your 3D glasses towards TV front.
➢Make sure that the distance between 3D display device and 3D glasses in recommended range.
➢ Check the 3D function setting of your 3D display device.
➢ Touch on button again when viewing abnormally
The LEDs don’ t blink when press on button.| The battery is drained, please charge the
➢ battery for rechargeable glasses, or change a new battery for non- rechargeable glasses.

Specifications

The battery is drained, please charge it

Model Name|

3D Active Glasses

---|---
Optics| Shutters| Liquid Crystal| Transmittance| 36% (TYP.)
Field Rate| 120Hz| Contrast Ratio| 1000:1
Power supply| Rechargeable Glasses| Battery type:3. 7V Li-con
Work time:45H
Charge time:2.5H
Blutooth| Received Distance| 10 m(typ)|
Temperature| Operating| 0°C —50°C| Storage| -30°C 70″C
Weight| 37±2 g (max.)

FCC Warnning:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection againstharmful interference in a residential installation. This equipment generates, uses and can radiateradio frequency energy and, if not installed and used in accordance with the instructions, maycause harmful interference to radio communications. However, there is no guarantee thatinterference will not occur in a particular installation. If this equipment does cause harmfulinterference to radio or television reception, which can be determined by turning the equipmentoff and on, the user is encouraged to try to correct the interference by one or more of thefollowing measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1)This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment . The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>