TRUCKERY HCSP24V150 Intelligent Lithium Battery Instruction Manual
- June 15, 2024
- TRUCKERY
Table of Contents
TRUCKERY HCSP24V150 Intelligent Lithium Battery
Welcome to choose our company’s products. This product is a new type of
lithium battery startup power supply developed by our company. For the safe
and reasonable use of this product, please read this manual in detail before
using it. A high-perfor-mance, long-life intelligent lithium battery leading
in China, incorporating high-tech features such as ultra-low-temperature high-
current starting, high-power long-endurance power supply, and remote online
diagnostics. 
- Mobile View Function By scanning the QR code on Truckery, you can view various battery parameters such as voltage, current, temperature, battery level, and usage count in real-time on your mobile phone.
- Cloud Monitoring Function Real-time monitoring of product operation status is conducted from the cloud. In case of a failure, the user will be promptly informed about the fault information via the internet and telecommunication networks.
Installation Instructions
Product Inventory
Wiring Diagram
Installation Steps
- Turn off the main power supply.
- Unfasten the fixation clip, open the cell cover of the Card Power Treasure.
- Dismantle positive and negative harnesses.
- Remove fixating bolts and pressure strips, take out the original vehicle battery.
- Install the Card Power Treasure according to the position of the fixing hole.
- Install the fixing pressure strip and bolts.
- Correspondingly install positive and negative harnesses.
- Mount the cover onto the cell compartment of the Card Power Treasure, tighten the clamp and switch on the power.
System Performance Metrics
HCSP24V150 Smart LiFeP04 Starting Battery
Product Dimensions
Instructions for Use
- Do not bear weight or compress the power source, as it could potentially result in battery damage.
- Avoid placing the product near heat sources, open flames, or flammable and explosive materials, as it may lead to fire or explosion.
- Do not disassemble the battery box on your own, nor modify or cut the internal parts of the product.
- Do not immerse the product in water or any other liquids.
- Do not charge the startup power source using any unqualified or incompatible chargers.
- The installed truck requires that the output voltage of the original vehicle’s generator must be 24V.
- During the transportation process, it is necessary to keep the box stable, and placing it at an overly high position is prohibited.
- Do not short-circuit the positive and negative terminals during power-on to avoid unnecessary loss.
FCC Statement
This device complies with part 15 of the FCC rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. Changes or
modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to r adio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Reorient or relocate the receiving antenna.
- Reorient or relocate the receiving antenna.
- consult the dealer or an experienced radio/TV technician for help with important announcement
Important Note:
Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator and your body.
This transmitter must not be co‐located or operating in conjunction with any
other antenna or transmitter.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>