SOCOMEC ATyS C25 ATS Controller User Manual
- June 17, 2024
- Socomec
Table of Contents
SOCOMEC ATyS C25 ATS Controller User Manual
DIN rail mounting
Mounting
Unmounting
Door mounting (IP 40)
dimensions in mm.
HMI
- Source 1 availability information (Green fixed when source 1 is present and available and within threshold limits, green blinking when source 1 is present but outside of threshold limits, off when under 50VAC).
- Switch 1 LED position indication (Green fixed when in position 1)
- Zero position LED indication (Yellow when in position 0)
- Load supplied information (Green fixed when load is supplied by an available source)
- Switch 2 LED position indications (Green fixed when in position 2).
- Source 2 availability information (Green fixed when source 2 is present and available and within threshold limits, green blinking when source 2 is present but outside of threshold limits, off when under 50VAC).
- Auto LED indication (Green fixed when in automatic, blinking when the transfer is ongoing, off when in manual mode).
- Test LED (Yellow fixed when test on load is ongoing)
- Configurations dip switches (see settings)
- Run LED (Green when product is powered)
- COM LED (yellow blinking when RS communications are ongoing).
- Fault LED (Red blinking – long blink when a fault or inhibit is activated (63A/64A open), short blink when a dip switch parameter has been changed and needs validation).
- Fire (Red when fire input is activated)
Hysteresis & Timers
Standards
When type tested with IEC 60947-6-1 RTSE Test level; Between SOURCES
Connection with ATyS
Dimensions
Settings
Warning: The product must be in manual mode (LED 7 OFF) for configuration changes. After changing the DIP switch settings press the RES button shortly (<3s) to validate.
DIP Switch
Technical characteristics
Connectors
Connectors top view
Connectors bottom view
Download PDF:SOCOMEC ATyS C25 ATS Controller User Manual
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>