DEWALT DCF887 20V Max Brushless Cordless Impact Driver Instruction Manual
- June 15, 2024
- Dewalt
Table of Contents
Instruction Manual
DCF887
DCF887 20V Max Brushless Cordless Impact Driver
20V Max 1/4″ (6.35 mm) Brushless Cordless Impact Driver Visseuse à percussion sans fil et sans balai de 6,35 mm (1/4 po), 20 V max
- Battery pack
- Battery release button
- Variable speed trigger
- Forward/reverse button
- Chuck collar
- 1/4″ (6.35 mm) hex quick-release chuck
- Mode selector
- Worklight
- Belt hook (optional accessory)
- Mounting screw
If you have questions or comments, contact us.
www.DEWALT.com
1-800-4-DeWALT
WARNING: Read all safety warnings, instructions, illustrations, and
specifications in this manual, including the battery and charger sections
provided in an original tool manual or the separate
Batteries and Chargers manual.
Manuals can be obtained by contacting Customer Service as described elsewhere
in this manual. Failure to follow the warnings and instructions may result in
electric shock, fire and/or serious injury.
Definitions: Safety Alert Symbols and Words
This instruction manual uses the following safety alert symbols and words to
alert you to hazardous situations and your risk of personal injury or property
damage.
DANGER: Indicates an imminentlyhazardous situation which, if not avoided,
will result in death or serious injury.
WARNING: Indicates a potentiallyhazardous situation which, if not
avoided, could result in death or serious injury.
CAUTION: Indicates a potentially hazardous situation which, if not
avoided, may result in minor or moderate injury.
(Used without word) Indicates a safety related message.
NOTICE: Indicates a practice not related to personal injury which, if not
avoided, may result in property damage.
original instructions
Scan the QR code on the tool to access the manual online.
Intended Use
These impact drivers are designed for professional impact screwdriving
applications. The impact function makes this tool particularly useful for
driving fasteners in wood, metal and concrete.
DO nOT use under wet conditions or in presence of flammable liquids or gases.
These impact drivers are professional power tools.
DO nOT let children come into contact with the tool.
Supervision is required when inexperienced operators use this tool.
GENERAL POWER TOOL SAFETY WARNINGS
WARNING: Read all safety warnings, instructions, illustrations and
specifications provided with this power tool. Failure to follow all
instructions listed below may result in electric shock, fire and/or serious
injury.
SAVE ALL WARNINGS AND INSTRUCTIONS FOR FUTURE REFERENCE.
The term “power tool” in the warnings refers to your mains‑operated
(corded) power tool or battery‑operated (cordless) power tool.
-
Work Area Safety
a ) Keep work area clean and well lit. Cluttered or dark areas invite accidents.
b ) Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes.
c ) Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control. -
Electrical Safety
a ) Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce risk of electric shock.
b ) Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.
c ) Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.
d ) Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of electric shock.
e ) When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock.
f ) If operating a power tool in a damp location is unavoidable, use a ground fault circuit interrupter (GFCI) protected supply. Use of a GFCI reduces the risk of electric shock. -
Personal Safety
a ) Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury.
b ) Use personal protective equipment. Always wear eye protection. Protective equipment such as a dust mask, non‑skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries.
c ) Prevent unintentional starting. Ensure the switch is in the off‑position before connecting to power source and/or battery pack, picking up or carrying the tool. Carrying power tools with your finger on the switch or energizing power tools that have the switch on invites accidents.
d ) Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury.
e ) Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations.
f ) Dress properly. Do not wear loose clothing or jewelry. Keep your hair, clothing and gloves away from moving parts. Loose clothes, jewelry or long hair can be caught in moving parts.
g ) If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. Use of dust collection can reduce dust‑related hazards.
h ) Do not let familiarity gained from frequent use of tools allow you to become complacent and ignore tool safety principles. A careless action can cause severe injury within a fraction of a second. -
Power Tool Use and Care
a ) Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed.
b ) Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired.
c ) Disconnect the plug from the power source and/ or remove the battery pack, if detachable, from the power tool before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally.
d ) Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users.
e ) Maintain power tools and accessories. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tool’s operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools.
f ) Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control.
g ) Use the power tool, accessories and tool bits etc. in accordance with these instructions, taking into account the working conditions and the work to be performed.
Use of the power tool for operations different from those intended could result in a hazardous situation.
h ) Keep handles and grasping surfaces dry, clean and free from oil and grease. Slippery handles and grasping surfaces do not allow for safe handling and control of the tool in unexpected situations. -
Battery Tool Use and Care
a ) Recharge only with the charger specified by the manufacturer. A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack.
b ) Use power tools only with specifically designated battery packs. Use of any other battery packs may create a risk of injury and fire.
c ) When battery pack is not in use, keep it away from other metal objects, like paper clips, coins, keys, nails, screws or other small metal objects, that can make a connection from one terminal to another. Shorting the battery terminals together may cause burns or a fire.
d ) Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help. Liquid ejected from the battery may cause irritation or burns.
e ) Do not use a battery pack or tool that is damaged or modified. Damaged or modified batteries may exhibit unpredictable behavior resulting in fire, explosion or risk of injury.
f ) Do not expose a battery pack or tool to fire or excessive temperature. Exposure to fire or temperature above 265 °F (130 °C) may cause explosion.
g ) Follow all charging instructions and do not charge the battery pack or tool outside the temperature range specified in the instructions. Charging improperly or at temperatures outside the specified range may damage the battery and increase the risk of fire. -
Service
a ) Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained.
b ) Never service damaged battery packs. Service of battery packs should only be performed by the manufacturer or authorized service providers.
Impact Wrench Safety Warnings – All Operations
• Hold the power tool by insulated gripping surfaces, when performing an operation where the fastener may contact hidden wiring. Fasteners contacting a “live” wire may make exposed metal parts of the power tool “live” and could give the operator an electric shock.
• Wear ear protectors during use. Exposure to noise can cause hearing loss.
WARNING: Impact wrenches are not torque wrenches. DO NOT use this tool for tightening fasteners to specified torques. An independent, calibrated torque measurement device such as a torque wrench should be used when under tightened or over tightened fasteners can lead to the failure of the joint.
• Wear safety goggles or other eye protection.
Hammering and drilling operations cause chips to fly.
Flying particles can cause permanent eye damage.
• Do not operate this tool for long periods of time. Vibration caused by tool action may be harmful to your hands and arms. Use gloves to provide extra cushion and limit exposure by taking frequent rest periods.
• Accessories and tools get hot during operation. Wear gloves when touching them. Additional Safety Information
WARNING: Never modify the power tool or any part of it. Damage or personal injury could result.
WARNING: ALWAYS use safety glasses. Everyday eyeglasses are NOT safety glasses. Also use face or dust mask if cutting operation is dusty. ALWAYS WEAR CERTIFIED SAFETY EQUIPMENT:
• ANSI Z87.1 eye protection (CAN/CSA Z94.3),
• ANSI S12.6 (S3.19) hearing protection,
• NIOSH/OSHA/MSHA respiratory protection.
WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are:
• lead from lead‑based paints,
• crystalline silica from bricks and cement and other masonry products, and
• arsenic and chromium from chemically‑treated lumber. Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these chemicals: work in a well ventilated area, and work with approved safety equipment, such as those dust masks that are specially designed to filter out microscopic particles.
• Wear protective clothing and wash exposed areas with soap and water. Allowing dust to get into your mouth, eyes, or lay on the skin may promote absorption of harmful chemicals. Direct particles away from face and body.
• Use the appropriate dust extractor vacuum to remove the vast majority of static and airborne dust. Failure to remove static and airborne dust could contaminate the working environment or pose an increased health risk to the operator and those in close proximity.
• Use clamps or other practical ways to secure and support the workpiece to a stable platform. Holding the work by hand or against your body is unstable and may lead to loss of control and injury.
• Air vents often cover moving parts and should be avoided. Loose clothes, jewelry or long hair can be caught in moving parts.
CAUTION: When not in use, place tool on its side on a stable surface where it will not cause a tripping or falling hazard. Some tools with large battery packs will stand upright on the battery pack but may be easily knocked over.
The label on your tool may include the following symbols. The symbols and their definitions are as follows:
V …………………….volts
Hz ………………….. hertz
min ………………… minutes
or DC …… direct current
…………………. Class I Construction (grounded)
RPM ……………….. revolutions per minute
sfpm ………………. surface feet per minute
SPM ……………….. strokes per minute
A ……………………. amperes
W …………………… watts
Wh …………………. watt hours
Ah ………………….. amp hours
or AC ……….. alternating current
or AC/DC …. alternating or direct current
…………………. Class II Construction (double insulated)
………………….. no load speed
n ……………………. rated speed
PSI………………….. pounds per squareinch
…………………. earthing terminal
**** ………………… safety alert symbol
…………………visible radiation do not stare into the light
………………… wear respiratory protection
………………… wear eye protection
………………… wear hearing protection
………………… read all documentation
ASSEMBLY AND ADJUSTMENTS
WARNING: To reduce the risk of serious personal injury, turn unit off and
remove the battery pack before making any adjustments or removing/installing
attachments or accessories. An accidental start‑up can cause injury.
Lanyard-Ready Attachment Kit (Fig. B–E)
(included on some models)
NOTE: Bit clip and belt hook cannot be used with the lanyard-ready
attachment kit installed. safety Warnings specific for Use At height
WARNING:
-
Only use batteries that contain the integral battery strap.
Do not use unsecured batteries while the tool is tethered.
Unsecured batteries may detach from the tool if dropped. -
If the tool is dropped for any reason, the lanyard attachmentpoint and battery strap components must be inspected and properly serviced prior to re‑use. The lanyard attachment point is designed to stretch to absorb the shock of a drop. Any permanent stretch to the device exposing the red marked internal coils indicates it has been compromised and must be serviced prior to reuse.
-
Always keep the tool and accessories tethered when working “at height”. (Maximum lanyard length: 6.5 ft [2 m].)
-
Use only with lanyards appropriate for this tool type and rated for at least the weight identified on the tool lanyard attachment point label.
-
Crush, cut or entanglement hazard. Do not use near moving parts, mechanisms or running machinery.
-
Do not anchor the tool lanyard to anything on your body. Anchor to a rigid structure that can withstand the forces of a dropped tool.
-
Make sure the lanyard is properly secure at each end prior to use.
-
Inspect tool and lanyard before each use for damage and proper function (including fabric and stitching). Do not use if damaged or not functioning properly.
-
Do not alter the lanyard attachment point or use in a manner other than as instructed in this manual.
-
Only attach tool to a lanyard with a locking carabiner. Do not attach by looping or knotting the lanyard. Do not use rope or cord.
-
Electrical shock hazard. Be sure power is off when working in high voltage areas. Some lanyards are conductive.
-
Dropped tools will swing on the lanyard, which could cause injury or loss of balance.
-
Do not carry the tool by the attachment point, the battery strap or the lanyard.
-
Do not attach more than one tool to each lanyard.
-
Only use appropriate DeWALT brand lanyard‑ ready attachment kit. NEVER modify tools to create attachment points.
-
Only transfer the tool between hands while properly balanced in a stable orientation.
-
Do not attach lanyards to tool in a way that keeps guards, switches or lock‑offs from operating properly.
-
Avoid getting tangled in the lanyard.
-
Keep lanyard away from the cutting area of the tool.
-
Do not use lanyards or attachment devices to get additional leverage from the tool.
-
Do not use for personal fall protection.
-
Falling object hazard! Only change batteries, accessories and attachments where a dropped object won’t cause a hazard below you. Consult your Authority Having Jurisdiction (AHJ) or site supervisor for procedures for working at height.
-
Do not use the charger or contractor bag at height.
-
Use multi‑action or screw gate type carabiners. Do not use single action spring clip carabiners.
The lanyard-ready attachment kit is intended for use by competent personnel who are trained and knowledgeable regarding working with tools in and around machinery and “at height”. A lanyard-ready attachment kit may only be added to certain models and must be installed by an authorized service center. The lanyard attachment point 12 is for attaching appropriate lanyards with locking carabiner ends for use at height, 6.5 ft (2 m) maximum length, rated for at least the weight identified on the tool lanyard attachment point label. Refer to Figure B.
Installing the Battery Strap Carabiner to the Lanyard Attachment Point
WARNING: DO NOT attach the lanyard to the battery strap. Lanyards should
only be attached to the lanyard attachment point.
The carabiner at the end of the battery strap 13 , should be opened and then
attached to the lanyard attachment point.
To open the carabiner:
- Install battery into tool.
- Flip open the carabiner tab 15 .
- Pull the tab upward.
- Move the carabiner locking arm 14 out to open.
- Attach the carabiner locking arm to the lanyard attachment point 12 .
- Move the locking arm back into place, push the tab back down so the pin engages the locking arm.
- The tool is now ready for a lanyard. Refer to Figure B.
Quick-Release Chuck (Fig. A, H)
WARNING: Use only impact accessories. Non‑impact accessories may break
and cause a hazardous condition. Inspect accessory prior to use to ensure that
it con tains no cracks.
NOTE: The chuck 6 accepts 1/4″ (6.35 mm) hex accessories and 1″ (25.4
mm) bit tips only. Place the forward/reverse button 4 in the lock-off
(center) position and remove battery pack before changing accessories.
To install an accessory, fully insert the accessory. The accessory is locked
into place (Fig. H).
To remove an accessory, pull the chuck collar 5 away from the front of the
tool. Remove the accessory (Fig. H).
OPERATION
**WARNING: To reduce the risk of serious personal injury, turn unit off
and remove the battery pack before making any adjustments or
removing/installing attachments or accessories. An accidental start‑up can
cause injury.
Installing and Removing the Battery Pack (Fig. F)
WARNING: Ensure the tool/appliance is in the off position before
inserting the battery pack.
NOTE:** For best results, make sure your battery pack is fully charged.
To install the battery pack 1 into the tool handle, align the battery pack
with the rails inside the tool’s handle and slide it into the handle until the
battery pack is firmly seated in the tool and ensure that it does not
disengage.
To remove the battery pack from the tool, press the release button 2 and
firmly pull the battery pack out of the tool handle. Insert it into the
charger.
Proper Hand Position (Fig. G)
WARNING: To reduce the risk of serious personal injury,
ALWAYS use proper hand position as shown.
WARNING: To reduce the risk of serious personal injury, ALWAYS hold
securely in anticipation of a sudden reaction. Proper hand position requires
one hand on the main handle 11 .
Variable Speed Trigger and Forward/Reverse Control Button (Fig. A)
The tool is turned on and off by pulling and releasing the variable speed
trigger 3 . The farther the trigger is depressed, the higher the speed of the
tool. Your tool is equipped with a brake. The chuck will stop as soon as the
trigger switch is fully released.
A forward/reverse control button 4 determines the rotational direction of
the tool and also serves as a lock-off button.
- To select forward rotation (clockwise), release the trigger and depress the forward/reverse control button on the right side of the tool.
- To select reverse (counterclockwise), depress the forward/ reverse control button on the left side of the tool.
NOTE: The center position of the control button locks the tool in the off position. When changing the position of the control button, be sure the trigger is released.
NOTE: Continuous use in variable speed range is not recommended. It may damage the switch and should be avoided.
NOTE: The first time the tool is run after changing the direction of
rotation, you may hear a click on start-up. This is normal and does not
indicate a problem.
Worklights (Fig. A)
CAUTION: Do not stare into worklight. Serious eye injury could result.
There are three worklights 8 located around the chuck collar 5 . The
worklights are activated when the trigger switch is depressed. When the
trigger is released, the worklight will stay illuminated for up to 20 seconds.
If the trigger switch remains depressed, the worklights will remain on.
NOTE: The worklights are for lighting the immediate work
surface and are not intended to be used as a flashlight.
Mode Selector (Fig. A)
Your tool is equipped with a mode selector 7 which allows you to select
one of three modes. Select the mode based on the application and control the
speed of the tool using the variable speed trigger switch 3 .
Precision Drive (Fig. A)
In addition to normal impacting modes, this tool features the Precision Drive
mode which enables greater control in lighter applications to avoid damage to
materials or fasteners. It is ideal for light applications such as cabinet
hinge screws or machine screws. Precision Drive mode will work as a
screwdriver in light applications, before hesitating as the screw head reaches
the work piece, and then (if required) start a slow controlled impact to
ensure the head ends perfectly flush.
NOTE: This mode is for light duty screwdriving applications. If the tool
will not drive a fastener in Precision Mode, please select mode 2 which will
give the additional power required.
Mode 1 | Precision Drive | rpm | 0–1000 |
---|---|---|---|
Mode 2 | Normal Impacting | rpm | 0–2800 |
Mode 3 | High Speed Impacting | rpm | 0–3250 |
Maximum Torque
Mode | Ft.-lbs. | in.-lbs. | nm |
---|---|---|---|
1 | 20 | 240 | 27 |
2 | 125 | 1500 | 170 |
3 | 152 | 1825 | 205 |
Usage (Fig. A)
CAUTION: Ensure fastener and/or system will withstand the level of torque
generated by the tool. Excessive torque may cause breakage and possible
personal injury.
- Place the accessory on the fastener head. Keep the tool pointed straight at the fastener.
- Press variable speed trigger switch 3 to start operation.
Release variable speed trigger switch to stop operation.
Always check torque with a torque wrench, as the fastening torque is affected by many factors including the following:
‑ Voltage: Low voltage, due to a nearly discharged battery, will reduce fastening torque.
‑ Accessory size: Failure to use the correct accessory size will cause a reduction in fastening torque.
‑ Bolt size: Larger bolt diameters generally require higher fastening torque. Fastening torque will also vary according to length, grade, and torque coefficient.
‑ Bolt: Ensure that all threads are free of rust and other debris to allow proper fastening torque.
‑ Material: The type of material and surface finish of the material will affect fastening torque.
‑ Fastening time: Longer fasten ing time results in increased fastening torque. Using a longer fastening time than recommended could cause the fasteners to be overstressed, stripped or damaged.
MAINTENANCE
WARNING: To reduce the risk of serious personal injury, turn unit off and
remove the battery pack before making any adjustments or removing/installing
attachments or accessories. An accidental start‑up can cause injury.
Your DeWALT power tool has been designed to operate over a long period of time
with a minimum of maintenance. Continuous satisfactory operation depends upon
proper tool care and regular cleaning.
Cleaning
WARNING: Blow dirt and dust out of all air vents with clean, dry air at
least once a week. To minimize the risk of eye injury, always wear ANSI Z87.1
approved eye protection whenperforming this procedure.
WARNING: Never use solvents or other harsh chemicals for cleaning the
non‑metallic parts of the tool. These chemicals may weaken the plastic
materials used in these parts. Use a cloth dampened only with water and mild
soap.
Never let any liquid get inside the tool; never immerse any partof the tool
into a liquid. Accessories
WARNING: Since accessories, other than those offered by DeWALT, have not
been tested with this product, use of such accessories with this tool could be
hazardous. To reduce the risk of injury, only DeWALT recommended accessories
should be used with this product.
Recommended accessories for use with your tool are available at extra cost
from your local dealer or authorized service center. If you need assistance in
locating any accessory, please contact DeWALT; call 1-800-4-DeWALT
(1-800-433-9258) or visit our website:
www.dewalt.com.
Belt Hook and Bit Clip (Fig. A)
Impact Accessories
WARNING: To reduce the risk of injury, use only DeWALT impact‑ready
accessories.
WARNING: Use only impact accessories. Non‑impact accessories may break
and cause a hazardous condition.
Inspect accessories prior to use to ensure that they contain no cracks.
Optional Accessory
WARNING: Drop Hazard. To reduce the risk of serious personal injury, DO
NOT use the belt hook for tethering or securing the tool to a person or object
during use when elevated.
WARNING: To reduce the risk of serious personal injury, DO NOT suspend
tool overhead or suspend objects from the belt hook. ONLY hang tool’s belt
hook from a work belt.
WARNING: To reduce the risk of serious personal injury, ensure the screw
holding the belt hook is secure.
NOTE: Bit clip and belt hook cannot be used with the lanyard-ready attachment
kit installed.
IMPORTANT: When attaching or replacing the belt hook, use only the screw
10 that is provided. Be sure to securely tighten the screw.
The belt hook 9 can be attached to either side of the tool using only the
screw 10 provided, to accommodate left- or right-handed users. If the hook
is not desired at all, it can be removed from the tool.
To move belt hook, remove the screw that holds the belt hook in place then
reassemble on the opposite side. Be sure to securely tighten the screw.
Repairs
The charger and battery pack are not serviceable. There are no serviceable
parts inside the charger or battery pack.
WARNING: To assure product SAFETY and RELIABILITY, repairs, maintenance
and adjustment (including brush inspection and replacement, when applicable)
should be performed by a DeWALT factory service center or a DeWALT authorized
service center. Always use identical replacement parts.
Register Online
Thank you for your purchase. Register your product now for:
- WARRANTY SERViCE: Registering your product will help you obtain more efficient warranty service in case there is a problem with your product.
- CONFIRMATIOn OF OWNERSHIP: In case of an insurance loss, such as fire, flood or theft, your registration of ownership will serve as your proof of purchase.
- FOR YOUR sAFETY: Registering your product will allow us to contact you in the unlikely event a safety notification is required under the Federal Consumer Safety Act.
- Register online at www.dewalt.com.
Three-Year Limited Warranty
For warranty terms, go to https://www.dewalt.com/support/warranty.
To request a written copy of the warranty terms, contact:
Customer Service at DeWALT Industrial Tool Co., 701 East Joppa Road, Towson,
MD 21286 or call 1-800-4-DeWALT
(1-800-433-9258).
lATin AMERICA: This warranty does not apply to products sold in Latin America.
For products sold in Latin America, see country-specific warranty information
contained in the packaging, call the local company or see website for warranty
information.
FREE WARning lABEl REPlACEMEnT: If your warning labels become illegible or are
missing, call 1-800-4-DeWALT
(1-800-433-9258) for a free
replacement.
Compatible battery packs and chargers
Battery Packs
DCB201, DCB203, DCB203G, DCB204, DCB204BT, DCB205, DCB205G, DCB205BT,
DCB206, DCB208, DCB210, DCB230, DCB240, DCBP034, DCBP520, DCB606, DCB609,
DCB609G, DCB612, DCB615
Chargers
DCB094, DCB102, DCB103, DCB104, DCB107, DCB112, DCB113, DCB115, DCB118,
DCB132, DCB1102, DCB1104, DCB1106, DCB1112
WARNING: Use of any other battery packs may create a risk of injury and
fire.
NOTE: DO NOT charge when the battery pack is below 40° F (4.5° C) or
above 104° F (40° C). Do not store or use the tool and battery pack in
locations where the temperature may reach or exceed 104° F (40° C).
- Maximum initial battery voltage (measured without a workload) is 20, 60 or 120 volts. Nominal voltage is 18, 54 or 108. (120V Max is based on using 2 DeWALT 60V Max lithium‑ion batteries combined.)
DEWALT Industrial Tool Co., 701 East Joppa Road, Towson, MD 21286
Copyright © 2012, 2014, 2015, 2016, 2017, 2020, 2021, 2023
The following are trademarks for one or more DeWALT power tools: the yellow
and black color scheme, the “D” shaped air
intake grill, the array of pyramids on the handgrip, the kit box
configuration, and the array of lozenge-shaped humps on the surface of the
tool.
NA454905
08/23
References
- Warranty | CRAFTSMAN
- DEWALT® Power Tools Official Site | Guaranteed Tough®
- DEWALT® Power Tools Official Site | Guaranteed Tough®
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>