Vekesen D01 Tik Tok Remote Controller Bluetooth Shutter User Manual
- June 15, 2024
- Vekesen
Table of Contents
Vekesen D01 TikTok Remote Controller Bluetooth Shutter
Packing List
Use Diagrams
Power on and Pairing
- In the power off state, press and hold the middle key for one second, the red and blue light flash alternately, the power on and automatically enters the pairing state (or when the phone is disconnected)
Power off
- In the power-on state, press and hold the middle key for 5 seconds, the red light will be on
Connect a mobile phone
- In the power off state, press and hold the middle key of the controller for one second, the red and blue lights flash alternately. The controller is pairing. At this time, turn on the Bluetooth of the mobile phone and search for the device.
- The Bluetooth menu shows: 001 and click, and complete the Bluetooth connection according to the prompt. If you can1 t find it please try turning off Bluetooth and turning it on again until the connection is completed
Mode 2: Automatic Connection
- After power on, the controller automatically connects the last connected mobile phone (ensure that the Bluetooth of the mobile phone is turned on}
Key Function
Take Pictures and Record Videos
In photo or video mode on your phone, press the up or down keys for 2 sec to take a photo or start and end recording video. one click the middle key to focus
Notes:
- only support the original phone camera to take photos and record videos
- not support taking photos and video functions when using the Tik Tok apps to watch videos
Low battery alarm
- Controller
- When the power of the controller is low, the red light flashes slowly to indicate that charging is needed
- Charging box
- When the charging box is low, the blue light flashes slowly to indicate that charging is needed
Charging Diagram
Charging box charging
Controller charging
Automatic shutdown function
- For normal pairing or pairing enabled by disconnecting from the mobile phone, if the mobile phone is not connected within 5 minutes, it will automatically shut down
- If there is no operation after pressing the button for 30 minutes, it will shut down automatically
iPhone / iPad Settings
- iPhone and iPad need to turn on the Assistive touch button before they can be used normally Please see the below picture
Notes:
- Make sure the 10S software of your device is above 14.8
- If you still can’t control the TikTok video after the touch button is turned on Please restart your device
Specification Parameter
Controller
Bluetooth version| Ver.5.0
Frequency (Hz)| 2.4 0GH z ~2.48GHz
Bluetooth name| D01
Password| 0000
Distance| 10 meters
Battery capacity| 25mAH
Charging time| About 1.5 hours
Charging box
Battery capacity| 200mAH
Charging time| About 2 hours
- Email support at4078462@qq.com
- (we will reply within 24 hours)
Documents / Resources
|
Vekesen D01 Tik Tok Remote Controller Bluetooth
Shutter
[pdf] User Manual
D01, D01 Tik Tok Remote Controller Bluetooth Shutter, Tik Tok Remote
Controller Bluetooth Shutter, Remote Controller Bluetooth Shutter, Controller
Bluetooth Shutter, Bluetooth Shutter, Shutter
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>