Heiniger XTRA Shearing Machine Instruction Manual
- June 15, 2024
- Heiniger
Table of Contents
Heiniger XTRA Shearing Machine
Product Information
Shearing Machine
Specifications
- Model: Xtra/I
- Issue/Index: 03-23
Safety Regulations
Introduction
This chapter describes the safety regulations that must be followed when using the shearing machine.
- All persons working with the shearing machine must read the operating instructions.
- Keep the operating instructions in a secure place that is accessible at all times.
- Authorized service agents should handle service and repair work.
Symbols and Warning Notes
Various symbols are used in the operating instructions to indicate possible hazards or draw the user’s attention to personal injury, material damage, or uneconomic operation.
-
Hazard symbols: These symbols denote possibly hazardous situations. Failure to avoid these situations can result in serious injury or even death.
-
Information symbols: These symbols provide important information or instructions to prevent damage or harm.
-
Stipulated Usage
The shearing machine is intended for shearing sheep and should not be used for other animals. It is designed for commercial use and should only be used in dry areas to ensure safety and avoid damage. The provided purpose of use is legally binding. -
Basic Safety Principles
Power Supply Connections
To reduce the risk of electric shock, the following precautions should be taken:
- Do not touch the device if it falls into water. Immediately unplug it from the socket.
- Avoid using the device while bathing or in the shower.
- Ensure the device is stored securely to prevent falls or damage.
Product Usage Instructions
Follow these instructions to safely and effectively use the shearing machine:
- Read and understand all safety regulations mentioned above.
- Ensure the shearing machine is placed on a stable and flat surface.
- Connect the power supply cord to a grounded electrical outlet.
- Attach the appropriate shearing head to the motor unit securely.
- Before starting, ensure that the shearing machine is clean and free from any obstructions or debris.
- Hold the shearing machine firmly with both hands, maintaining a proper grip.
- Switch on the power and adjust the speed settings according to your requirements.
- Begin shearing by gently guiding the shearing head along the animal’s body, following the natural direction of hair growth.
- Regularly clean and oil the shearing head during use to maintain optimal performance.
- After use, switch off the power and disconnect the power supply cord from the electrical outlet.
- Clean and store the shearing machine in a safe and dry place, away from children or unauthorized users.
FAQ (Frequently Asked Questions)
Can I use the shearing machine for animals other than sheep?
No, the shearing machine is specifically designed for sheep shearing and
should not be used on other animals.
Can I use the shearing machine in wet areas?
No, the shearing machine should only be used in dry areas to ensure safety and
maintain its performance.
How often should I clean and oil the shearing head?
You should regularly clean and oil the shearing head during use to prevent
clogging and maintain optimal performance. The frequency of cleaning and
oiling depends on the usage conditions and the type of animal being sheared.
IMPORTANT SAFETY INSTRUCTIONS
NOTE!
When using an electrical device, you must always observe basic precautionary
measures as described below.
Read all instructions before using the device.
Safety regulations Introduction
- This chapter describes the safety regulations that are to be taken into consideration as a matter of course when using the shearing machine.
- All persons who carry out work on and with the shearing machine must read the operating instructions.
- The operating instructions are to be kept in a secure place that is accessible at all times.
- Authorised service agents may only carry out service and repair work.
Symbols and warning notes
Various symbols are used in the operating instructions. These symbols indicate
possible hazards or bring to the user’s attentionsuch technical information
that, if not complied with, may lead to personal injury and material damage or
to uneconomic operation.
Hazard symbols
WARNING!
Denotes a possibly hazardous situation. Serious injury and even death can
result if such situations are not avoided.
CAUTION!
Denotes a possibly hazardous situation. Light or slight injury can result if
such situations are not avoided.
Information symbols
NOTE!
A note which, if not complied with, can lead to operational stoppages or
damage.
Stipulated usage
The intended purpose of use of the shearing machine is described in Chapter
“2.2 Purpose of use”. Shearing of other animal
The setais omanie m chapter 2.3 Tend dala, are to be considered as legally
binding limit values and characteristic data.
Basic safety principles
Power supply connections
DANGER!
In order to reduce the risk of electric shock:
- Do not touch the device if it falls into water. Immediately pull the plug out of the socket.
- Do not use when bathing or in the shower.
- Do not place or store the device in such a way that it can fall or be pulled into a tub or sink. Do not place the device in water or
- Alvery suiput appliance tom ale electical outlet immediately after using.
- Unplug the device from the mains before cleaning it.
WARNING!
In order to reduce the risk of burns, fire, electric shocks or injuries to
people:
-
A device must never be left unattended when it is plugged in.
-
This device is not intended to be used by persons (including children) with reduced physical, sensory or mental capabilities,or lack of experience and knowledge, unless they are supervised by a person responsible for their safety or have been given instructions by that person on how to use the device.
Children should be supervised to ensure that they do not play with the equipment. -
Only use the device for the purpose described in these instructions. Do not use any mounting components that are not specified by the manufacturer.
-
Never use the device if the cable or outlet are damaged or if it does not work properly after falling, sustaining damage or landing in water. Take the device to a service centre for inspection and repair.
-
Keep the cable away from heated surfaces.
-
Keep the air openings free of lint, hair, and similar objects.
-
Never drop or insert objects into an opening.
-
Do not use the device outdoors and do not operate it while aerosol products (sprays) are being used.
-
Do not use this device with a damaged or broken comb as this may cause injury to the face.
-
In order to disconnect the device, switch all operating elements to the OFF position (e.g. “0”) and then remove the plug from the socket.
-
Do not leave the device in places where it is expected to:
-
be exposed to damage by an animal, or Be exposed to weather conditions.
WARNING!
Keep the device dry.
Maintenance and inspection obligation
- Only operate the shearing machine when it is undamaged and in proper condition.
- If a defect is found on the housing or on the electrical cable, it must be repaired by a repair and service centre.
Noise emission / personal protective equipment
The acoustic emission while operating the device is typically 93 dB(A). We
recommend that ear protection, safety glasses and gloves are always worn when
operating the plant.
Personal protective equipment to be provided by the operator.
Residual dangers
WARNING!
The blades may become hot after prolonged use.
Do not place the device where it is likely to be damaged by an animal or
exposed to the weather.
Should dangers and hazards occur during operation which are not directly
related to the shearing of animals, we request that you inform us of this.
This also applies in the event of a technical failure that causes a hazard.
Supervision of children
WARNING!
Children are forbidden from operating the equipment.
Children should be supervised to ensure that they do not play with the
equipment.
Operator requirements
NOTE!
The safe use of the machine places few demands on operating personnel. These
must, however, be observed and maintained as a matter of course.
- The operator has experience in dealing with the animals being shorn.
- The operator has read and understood the operating instructions, or has been indoctrinated into the operation of the machine by a skilled person, and the risks and dangers have been pointed out to him.
KEEP THESE INSTRUCTIONS IN A SAFE PLACE!
Stipulated usage
Component list
Designation of individual parts
Pos. | Description | Qty. | Pos. | Description | Qty. |
---|---|---|---|---|---|
1 | Sheep shearing head case XTRA/12V | 1 | 37 | Ventilation blade VS84 | (1) |
2 | Swivelling fork XTRA/12V | 1 | 38 | Rotor VS84 24OV, |
incl. item. 37
| 1
3| Sheep shearing head cover XTRA/12V black| 1| 38| Rotor VS84 12OV,
incl. item. 37
| 1
4| Chicken feet 2.5” XTRA/12V right| Option| 39| Play compensation disc 626| 1
5| Chicken feet 2.5” XTRA/12V left| Option| 40| Ball bearing 626-2Z| 1
6| Chicken feet 3” XTRA/12V left| 1| 41| Socket head cap screw M3 x 72.5| 2
7| Chicken feet 3” XTRA/12V right| 1| 42| Serrated washer M3| 2
8| Retaining spring XTRA/12V| 1| 43| Spacer sleeve VS84| 2
9| Gear Z30 XTRA/12V black| 1| 44| Air fow guide VS84| 1
10| Gauge plate 2.5” XTRA/12V| Option| 45| Stator VS84 240V| 1
11| Gauge plate 3” XTRA/12V| 1| 45| Stator VS84 120V| 1
12| Eccentric shaft XTRA/12V| 1| 46| Motor housing VS84 Heiniger grey| 1
13| Ball XTRA/12V| 1| 47| Carbons with spring + cover sleeve VS84/HANDY| 2
14| Circlip XTRA/12V| 1| 48| Carbon cap VS84/HANDY| 2
15| Threaded insert XTRA/12V| 1| 49| Cable VS84/HANDY with plug EURO| 1
---|---|---|---|---|---
16| Centre post XTRA/12V| 1| 49| Cable VS84/HANDY with plug AUS| 1
17| Comb plate screw, sheep| 2| 49| Cable VS84/HANDY with plug USA| 1
18| Adjusting knob XTRA/12V Heiniger| 1| 50| Anti-kink sleeve VS84/ HANDY
EURO/AUS| 1
19| Locknut XTRA/12V| 1| 50| Anti-kink sleeve VS84/ HANDY/12V USA| 1
20| Sliding sleeve XTRA/12V| 1| 51| PT screw KA25 x 6| 1
21| Ball bearing 608-2RS| 1| 52| Switch housing, top VS84
black
| 1
22| Raised countersunk screw M4 x 28| 2| 53| Shoulder screw M3.5| 1
23| Countersunk screw M4 x 8| 2| 54| Overcurrent protection switch VS84 1A /
240V| 1
24| Retaining ring for shaft Ø6| 1| 54| Overcurrent protection switch VS84
1.8A / 120V| 1
25| PH-screw M4 x 10| 2| 55| Main switch VS84/ HANDY/12V| 1
26| Ball bearing 608-2Z| 1| 56| Capacitor 0.15µF VS84/ HANDY 240V| 1
27| Sheep shearing head 3” XTRA/12V with comb plates| 1| 56| Capacitor 0.15µF
VS84/ HANDY 120V| 1
28| Socket head cap screw M3.5 x 8| 7| 57| Cable clamp VS84/HANDY AUS| 1
29| Gearbox housing XTRA/12V black| 1| 57| Cable clamp VS84/ HANDY/12V
EURO/USA| 1
30| Gear Z21/12 VS84| 1| 58| Clamp VS84/HANDY/12V| 1
31| Axis XTRA/12V| 1| 59| Socket head cap screw M3 x 25| 1
32| Sealant XTRA/HANDY/12V| 1| 60| Cover VS84/HANDY/12V| 1
33| Centring fange VS84/
HANDY
| 1| 61| Switch housing, bottom
VS84/HANDY/12V black
| 1
34| Play compensation disc 608| 1| 62| Countersunk screw M3 x 6| 4
35| Ball bearing 608-2Z| 1| 63| Filter cover complete VS84/ HANDY/12V black| 1
36| Retaining ring for bores Ø22| 1| | Converter EURO/GB plug|
Purpose of use
The shearing machine is used exclusively to shear sheep, goats and llamas,
alpacas and other camels. By changing the standard shearing head, the range of
use can also be extended to cattle and horses.
Other uses, in particular the use of the machine on people, are expressly
prohibited.
Technical data
- Product name
- Mains voltage
- Motor output
- Rotary speed
- Required fuse protection
- Dimensions (W x H x L)
- Weight not including cable
- Max. ambient temperature
- Max. humidity
- Noise emission (-pAm)
- Acceleration (avhw)
Xtra
see rating plate
see rating plate
see rating plate
see rating plate
approx. 80 mm x 95 mm x 350 mm
1560 g
0° – 40°C
1O% – 9O% (relative)
93 dB(A) (DIN-45635-1/O4.84 + BG-PAS 26)
11 m/sec2 (EN 28662-1/O1.93)
We reserve the right to make technical changes and improvements without notice.
Equipment
- Shearing machine with shearing head
- Pair of shearing blades
- Special screwdriver
- Gearing presal lubricating oll
- Case tor ansport and storage
Options
- Alternative shearing head for replacement (for cattle and horses)
- Diverse shearing blades
Initial start-up
Controls and operating instructions
WARNING!
The improper use of electrical devices, especially animal breeding devices, is
associated with dangers! Therefore, before putting the machine into operation,
observe the following accident-preventing measures:
-
The voltage specified on the maker’s plate and that of the local power supply must match. The plant may only be connected to an AC power supply.
-
Avoid any contact with the moving shearing blades.
-
Even with the machine switched off, do not handle the area round the shearing blades as long as the machine is still connected to a power source. Whenever working on the shearing blades/head, always first disconnect the power supply.
-
Avoid contact with a machine that is in contact with liquids.
Never shear wet animals. Liquid that has penetrated the machine reduces the electrical insulation. There is a danger of electric shock or short circuit. Clean the machine only when it is dry, using a brush or the cleaning brush. -
An electric cable lying loose on the floor over a long distance can get caught and become a danger. Before starting shearing, lay the cable carefully and securely. Avoid kinks or coils in the cable. Animals should not be able to stand on, walk over or get caught in the power cable. Never wrap the power cable around the machine and keep the power cable away from hot surfaces and objects. This can result in breaks and damage to the insulation. Check the cable regularly for damaged spots.
-
Turn the machine switch to OFF (position 0, Fig. 2) before unplugging the machine.
-
Use only original shearing blades. Do not use damaged shearing blades with blunt or broken teeth. Only work with sharp shearing blades sharpened by a specialist workshop.
-
We recommend that you do not use the comb for more than one hour and the upper blade for more than 15 minutes.
-
Before beginning shearing, remove foreign objects from the coat (wire, wood etc.).
-
Wear suitable work clothes. Do not wear loose-fitting clothing or jewellery. These can get caught in the moving machine parts. Wearing safety glasses and hearing protection is strongly recommended.
-
Never insert an object into an opening of the machine.
-
The noise of the clipper can trouble animals. A kick or the body weight of the animal can cause significant injuries. Fix the animal sufficiently, approach the animal from the front and switch on the machine already in the animal’s field of vision.
-
Shearing of animals should only be done when unauthorised persons do not have access to the shearing site.
-
Only shear in well-ventilated areas (dust) and never near explosive objects or gases.
-
Generally, never plunge the shearing machine and shearing head into liquids such as water, soapy water, diesel, petrol, or anything else. This leads to considerable damage to the mechanics and engine.
WARNING!
These safety instructions must be followed all the time. It is recommended to
always use a residual current safety plug when working with electrical
devices.
Shearing adjustment with shearing pressure adjustment knob Make the setting
during commissioning as follows:
Before shearing
When the machine is switched off
- Ensure that the tapered pins of the chicken feet engage exactly in the positioning holes of the upper blade(Fig. 3, item 2).
- See rethstance is teles. 5, antment knob down until the irst noticeable resistance is felt (Fig. 3, item 1).
- Then screw the shearing pressure adjustment knob another 1/4 turn.
- Put the shearing machine into operation. Loosen the shearing pressure adjustment knob (Fig. 7) until the shearing blades have almost no contact pressure (noise level increases).
WARNING!
If the shearing pressure adjustment knob is released too much, the upper blade
can fly off and result in injuries.
Tighten the shearing pressure adjustment knob only slowly until the noise
level becomes dull and you feel resistance when tightening the shearing
pressure adjustment knob. Turn the shearing pressure adjustment knob back 1/4
turn. The pressure should be well adjusted.
After each new setting, check the cutting power on the animal and only then
continue turning.
During shearing
NOTE!
The patented shearing system works with much less contact pressure than
conventional sheep shearing machines. Thus, care must be taken that the
shearing tension is not set too high. Adjust the shearing tension very
slightly from time to time during shearing (max. 1/4 turn).
If shearing is started with the shearing pressure adjustment knob
insufficiently tightened, hair may accumulate between the shearing blades.
This negatively affects the further course of the shearing or even makes it
impossible. If this is the case, the shearing blades must be dismantled,
cleaned, oiled and refitted as described in 4.2.
Lubrication
Before and during shearing
For a good shearing result and to increase the service life of the machine and
shearing blades, a thin layer of oil on the upper and lower blades (Fig.
4,item, 1+3) is essential. All other moving parts in the shearing head must
also be well oiled. Drip oil onto the shearing blades and into the lubrication
hole provided on the shearing head (Fig. 4, item 2).
Onion. risis calls fee and des normiase any is von on sini mucous membranes.
This paraffin oil degrades to about 20% after 21 days (CEC-L-33-T-82).
NOTE!
Lack of lubrication is the most common cause of failure for unsatisfactory
shearing results.
Insufficient oiling of the shearing blades leads to heating and a reduced
service life of the blades.
The shearing blades and the shearing head must be sufficiently oiled during
shearing so that they do not run dry.
ON/OFF switch
The switch has two positions (Fig. 2 shows position 0).
- Position 0: Machine switched off
- Position I: Machine switched on
NOTE!
Always use the slide switch (Fig. 2) to turn the machine on and off.
Check the switch position before plugging in the cable.
Malfunctions
The over a dictit breaker protects the machine from impermissible mechanical
and thermal stress. If the button of the overload protection switch a wou the
sima sites f 2 petite witch of the machine addition Remedy the defect with the
power plug disconnected. The machine can be restarted after a few minutes by
pressing in the overload protection switch button.
For other malfunctions, see also Troubleshooting in chapter 5.2.
Maintenance
NOTE!
Before commencing any maintenance work disconnect the electrical power supply
by pulling out the plug.
Do not handle the area round the shearing blades as long as the machine is
still connected to a power source. Whenever working on the shearing
blades/clipper head, always first disconnect the power supply.
Cleaning
Cleaning the shearing head and clipper blades
After finishing the shearing, remove oil from the machine by wiping with a dry
cloth and carefully clean the shearing head and shearing blades with a dry
brush. Then oil the parts to prevent rusting. Even the smallest rust spots on
the shearing blades impair shearing or make it completely impossible.
Mounting the shearing blades
A pair of shearing blades consists of a lower blade (Fig. 6, item 2) and upper
blade (Fig. 6, item 1). When mounting the blades, make sure that the correct
surfaces are placed on top of each other. The blades are mounted facing
upwards.
- Loosen the screws and remove the two old shearing blades.
- Make sure that the new shearing blades are clean. In particular, make sure that the sanded surfaces are free of dirt. Otherwise, satisfactory shearing performance cannot be achieved even with newly sharpened shearing blades.
- Place the new upper blade in the driving cones of the chicken feet (Fig. 9 + Fig. 3, item 2) and push the new comb plate between the loosened screws (Fig. 10).
- Now tighten the blade fixing screws until you can just move the new comb plate sideways by hand.
- Now turn the machine over so that the shearing pressure adjustment knob is pointing upwards again.
- It is now important that you place the blades on top of each other so that the ground surface of the comb blade protrudes approx. 1.5 – 2.0 mm above the tips of the upper blade (Fig. 11).
- Once you have adjusted the shearing blades, fix the position of the comb plate and tighten the blade fixing screws firmly.
- Check that the shearing blades are correctly mounted and that the driving cones of the chicken feet (Fig. 3, item 2) are in the holes provided for them on the upper blade. Now tighten the shearing pressure adjustment knob until the upper blade is pressed onto the comb plate and you feel a slight resistance.
Regrinding the shearing blades
Only work with sharp shearing blades. Replace blunt or defective blades
without teeth. The correct resharpening of shearing blades is only to be done
by special machines or by a specialist. In that case, contact your service
centre.
Cleaning the air filter (Figure 12)
The air filter element is located on the underside of the motor part of the
machine. The air filter can be removed from the machine for cleaning. Regular
cleaning of the element with a dry brush is essential. Make sure that no
foreign objects get into the machine while cleaning the air filter.
WARNING!
The machine must never be operated without an air filter!
Changing the shearing head (Figure 13, option)
To change the shearing head from “sheep” to “livestock” or vice versa, loosen
the two screws on the shearing head. Remove one shearing head and mount the
other one (grease the gear Fig. 1a, item 8 if necessary). Retighten the two
screws.
Storing the shearing machine (Figure 14)
CAUTION!
Only store the shearing machine in dry rooms and in the case supplied. If
liquid is suspected to have entered the machine, do not switch it on again.
There is a danger of electric shock or short circuit. Hand over the shearing
machine to a service centre.
Get into the habit of always giving the shearing machine a good clean after
use, oiled and with the shearing system relaxed in the equipment case,store
the device in a dry and clean location out of the reach of children.
Troubleshooting and repairs
Tr components avarabe is designed a to give ongevily and ign perduvoid any warranty claim.
Introduction
WARNING!
The following troubleshooting guide will aid in determining problems and offer
a solution.
For information on authorised service points, see chapter “7 Contact address”.
An authorised service agent is to be contacted in the event of malfunctions
that are not contained in this manual.
Troubleshooting Sheep shearing head
Malfunction | Cause | Rectification |
---|---|---|
The upper blade does not move across the full bearing surface. | Retaining | |
spring broken. | Notify customer service |
Eccentric shaft and/or ball and/or swivelling fork worn out
Bearings heavily worn
Top blade does not move| Faulty gear Z30 black
(Fig. 1a, item 8)
| Replace gear
Faulty reduction gear in motor unit| Notify customer service
Eccentric shaft is broken or bent
Ball is missing.
Shearing pressure adjust- ment knob automatically releases.| Circlip missing
(Fig. 1a, item 4)| Replace circlip and fit so
that the shearing pressure adjustment knob can be easily turned to tighten and clamped to loosen
Threaded insert is loose.| Seal threaded bush using “Loctite” or a similar
product
Not enough pressure can be applied to the upper blade.| Retaining spring
broken.| Notify customer service
---|---|---
Sliding sleeve is missing
(Fig. 1a, item 6)
| Replace sliding sleeve
Sliding sleeve is worn
(Fig 1a, item 6)
| Replace sliding sleeve
Swivelling fork is worn at the top| Notify customer service
Chicken feet are worn
(Fig 1a, item 2)
Chicken feet fall out.| Securing cams on the re- taining spring are broken.|
Notify customer service
Cuts poorly| Comb plate or upper blade is blunt| Notify customer service
Shearing tension too low| Increase the pressure and tighten the shearing
pressure adjustment knob (Fig. 3,
item 1).
Blade was not sharpened properly| Notify customer service
Does not cut| Comb plate is not mounted properly| Move the upper blade back to
the comb plate by 1.5 mm (Fig. 11)
Ball is missing (Fig. 1a, item 25)| Notify customer service
Faulty gear or reduction
gear (Fig. 1a, item 8)
| Replace gear
Notify customer service
Shearing head is worn out
(Fig. 1a, item 23)
| See items 1-4
Shearing head gets very hot| Shearing tension too high| Reduce the shearing
tension and have the blades grounded again if necessary
Ball (Fig. 1a, item 25) with- out lubricant film| Oiling the ball
Sliding sleeve (Fig. 1a, item 6) without grease| Greasing sliding sleeve
Bearings worn out| Notify customer service
Motor unit
Malfunction | Cause | Rectification |
---|---|---|
Motor is not running | No power. | Power supply and/or fuse faulty. |
Cable faulty. | Notify customer service |
Switch or motor defective
Overload protection switch
off
| Switch on (Fig. 5)
Overload protection switch always switches off (Fig. 5)| Blade blocked (Fig.
6)| Remove blockage.
Air filter clogged (Fig. 12)| Clean or replace air filter
Rotor or stator faulty| Notify customer service
Faulty overload protection switch
Motor runs very slowly| Carbons consumed| Notify customer service
Rotor or stator faulty
Motor unit becomes hot.| Air filter clogged, air can no longer circulate (Fig.
1a, item 28)| Clean air filter in dismantled state with brush or replace
filter
Shearing tension too high| Tighten the shearing pres- sure adjustment knob
less strongly (Fig. 7). If the blades no longer cut, they must be reground or
replaced
Bearing faulty (penetration of cleaning fuid)| Notify customer service
Motor unit makes a very strong whistling noise| Reduction gears and axles
without lubricant film
| Notify customer service
Motor vibrates| Rotor runs out of round (generated by a strong impact)| Notify
customer service
Bearings worn out
Environmental protection and waste disposal Introduction
The operator is responsible for the proper disposal of the shearing blades and
the shearing machine after they are no longer in working order. Please observe
the relevant regulations applicable in your country.
Material groups
Please hand this in to a service point or your local specialist electrical
workshop when the machine is to be dismantled.
Material | Contained in pos. X taken from Fig. 1a |
---|---|
Rubber | 18 / 19 |
Polyamide | 8 / 27 / 28 |
Iron/steel | 1 / 2 / 3 / 4 / 5 / 6 / 7 / 8 / 9 / 10 / 11 / 12 / 21 / 22 / 24 / |
25 / 26 / 28 / 29 / 30
Copper| 11 / 12 / 17 / 19
Brass| 13 / 15 / 17 / 27
Aluminium| 23
other substances| 9 / 10 / 13 / 14 / 15 / 17 / 30
Contact address
The sales point or company specified on your guarantee certificate are
authorised service points, or, alternatively, refer to the nearest service
point in your area.
In case of claim, please return your machine with the instruction manual and
the warranty card directly to your local distributor. Please do not cut off
the warranty card from the instruction manual.
© 2023 Heiniger AG. All rights reserved.
This instruction manual may not be duplicated or distributed, neither
completely nor in extracts or by electronic or mechanical means (including
photocopying), transmitted or used for the purpose of competition without
authorisation from Heiniger AG.
Subject to change without notice.
Contact:
Heiniger AG
Industrieweg 8
CH – 3360 Herzogenbuchsee
Switzerland
Tel. +41 (0)62 956 92 00
marketing(at)heiniger.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>