IPEVO P2V ULTRA UHD 4K Object Camera User Guide

June 15, 2024
IPEVO

P2V ULTRA UHD 4K Object Camera

Product Information

Specifications:

  • Product: IPEVO P2V ULTRA OBJECT CAMERA
  • Model: CDVU-16IP
  • Input: 5V 0.5A
  • Made in: Thailand

Product Usage Instructions

IPEVO Visualizer:

The IPEVO Visualizer is a software application that allows you
to use the P2V Ultra Object Camera with your computer. You can
download the IPEVO Visualizer from the website www.ipevo.com.tw/pages/visualizer.

IPEVO CamControl:

The IPEVO CamControl is a software application that provides
additional camera control features. You can download the IPEVO
CamControl from the website www.ipevo.com.tw/pages/camcontrol.

LED Indicators:

The LED indicators on the P2V Ultra Object Camera provide
important information about its status:

  • AF-C: Auto Focus Continuous mode.
  • AF-S: Auto Focus Single mode.
  • USB-C: USB connection status.

MIC and AI Functions:

The P2V Ultra Object Camera features MIC (microphone) and AI
(artificial intelligence) functions:

  • MIC: Enables the microphone function.

  • AI MIC: Enables the AI microphone
    function.

  • AI MUTE: Mutes the AI microphone.

FCC Declaration:

The P2V Ultra Object Camera complies with Part 15 of the FCC
Rules. It operates under the following conditions:

  • This device may not cause harmful interference.

  • This device must accept any interference received, including
    interference that may cause undesired operation.

  • Reorient or relocate the receiving antenna.

  • Increase the separation between the equipment and
    receiver.

  • Connect the equipment into an outlet on a circuit different
    from that to which the receiver is connected.

  • Consult the dealer or an experienced radio/TV technician for
    help.

  • Any changes or modifications not approved by the responsible
    party could void the authority to operate the equipment.

  • The P2V Ultra Object Camera and its antenna must not be
    co-located or operating with any other antenna or transmitter.

  • In the USA/Canada market, only channels 1-11 can be operated.
    Selection of other channels is not possible.

Declaration of the Presence Condition of the Restricted

Substances Marking:

The P2V Ultra Object Camera complies with RoHS 2.0 and CAN
ICES-003(B)/NMB-003(B) standards.

FAQ (Frequently Asked Questions)

Q: Where can I download the IPEVO Visualizer?

A: You can download the IPEVO Visualizer from the website
www.ipevo.com.tw/pages/visualizer.

Q: Where can I download the IPEVO CamControl?

A: You can download the IPEVO CamControl from the website
www.ipevo.com.tw/pages/camcontrol.

Q: What do the LED indicators on the P2V Ultra Object Camera

mean?

A: The LED indicators provide information about the camera’s
status. “AF-C” indicates Auto Focus Continuous mode, “AF-S”
indicates Auto Focus Single mode, and “USB-C” indicates the USB
connection status.

Q: What are the MIC and AI functions on the P2V Ultra Object

Camera?

A: The MIC function enables the microphone, while the AI MIC
function enables the AI microphone. The AI MUTE function mutes the
AI microphone.

Q: What FCC regulations does the P2V Ultra Object Camera comply

with?

A: The P2V Ultra Object Camera complies with Part 15 of the FCC
Rules, which includes conditions to prevent harmful interference
and guidelines for residential installation.

Q: What are the restrictions on channel selection in the

USA/Canada market?

A: In the USA/Canada market, only channels 1-11 can be operated.
Selection of other channels is not possible.

www.IPEVO.com

P2V ULTRA OBJECT CAMERA

1

IPEVO P2V ULTRA
2

3

IPEVO P2V ULTRA

IPEVO Visualizer

3 AF-C = AF-S =

USB-C

4

5

www.ipevo.com.tw/pages/p2v-ultra

IPEVO Visualizer IPEVO

IPEVO CamControl

www.ipevo.com.tw/pages/visualizer

www.ipevo.com.tw/pages/camcontrol

LED = = & AI = & = & AI

MIC = AI MIC = & AI MUTE =

!

/

FCC Declaration
Federal Communications Commission (FCC) Statement
This device complies with Pert 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help.
Any changes or modifications not expressly approved by the party responsible for compliance could void the authority to operate equipment. This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter.
For product available in the USA/Canada market, only channel 1 11 can be operated. Selection of other channels is not possible.

Declaration of the Presence Condition of the Restricted Substances Marking
R35564 RoHS 20
R-R-1PV-P2V_Ultra
CAN ICES-003(B)/NMB-003(B)

PRODUCT / / : IPEVO P2V ULTRA OBJECT CAMERA
MODEL / / : CDVU-16IP
INPUT / / : 5V0.5A
Operation temperature/ / 0° C to 40° C
MADE IN THAILAND/ /

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals