WZATCO C16 Lumens Portable LED Smart 3D 4K WiFi Home Theater Projector Instruction Manual

C16 Lumens Portable LED Smart 3D 4K WiFi Home Theater Projector
Instruction Manual

C16 Lumens Portable LED Smart 3D 4K WiFi Home Theater Projector

Please read the manual carefully before operating projector..

Important Safeguards

Installation

• To get a better watching, please use this projector while drawing the curtain or in a dark room.
• Please use the projector carefully, dropping or crashing may damage parts or result in blurred images and abnormal displaying.

Power

• Be careful while using the power cord, avoid excessive bending; the damage of power cable may cause electric shock and fire.
• It is better to unplug the power cord after power off.

Cleaning

• Unplug the power cable firstly.
•  Clean the shell regularly with a damp cloth, neutral detergent can be used.
•  Please use a glasses cloth or lens paper, not to scratch the lens.
•  Please clean projector’s vents and speakers regularly by banister brush, or the ventilation will be blocked.

High Temperature Attention

• While projection or just finishing, the exhaust port nearby will be very hot, if touch it, would get scald.
• While projection, please do not look the lens directly, or may hurt eyes.

Warm Tips

• Do not disassemble the projector, if not, there will be a risk of electric shock, and the disassembling affect the normal warranty.
•  Please do not put any liquid or heavy stuff on the projector.
• To ensure the stability of heat dissipation, please open the height bracket in the  bottom of the projector before starting.

Accessories List

• Remote Control x 1
• Power Cable 1
• User Manual 1
• Lens cap x1

Projector Knowledge

Projector can input high-definition video signal and composite video signal, and support stereo audio signal input and output. Please refer to the following figure to connect the projector and other audio equipment according to your own needs.

1. Camera(Only available in auto focus version)
2.  IR Receiver
3.  Focus Lens
4.  3.5mm port for Audio Output
5. AV port
6.  USB port
7.  HDMI 1 port
8. HDMl2port
9. IR Receiver
10. RJ45 port
11.  Air inlet
12. Speaker
13. Power Socket
14. Cooling Window
15. Cooling Window

1. Keystrokes ( picture 1)
2. Rating Label
3.  Level-Stand Adjustment
4. Hanger Fixing Screw Holes ( M5 ) (Remove 4 machine foot pads can be hoisted, M5 nut, the required twisting depth < 10mm)

Remote Control

IR remote control

1. Signal Indicator
2. . Power Key
3.  Arrow keys
4.  Home Key
5.  Return key
6.  Volume+
7.  Volume-
8.  Source key
9.  Confirmation key
10.  Menu
11.  Mute Key
12. Focus+
13. Focus-
14. Screen Flip

Bluetooth remote control
( Only available in Bluetooth remote control version) Bluetooth remote control connection method

1. Open the Bluetooth settings (see page 14 for specific operations)
2. Please long press” ( “key to enter pairing, Search for Bluetooth devices, choose RC name “RGExxx”, complete the connection.

Projector Installation

Standard Setting
Please refer to the following table to adjust your picture size and distance. (from the lens to the screen).

Please allow ± 3% to the image sizes in the table above. If the distance is less than min data and more than max data, the image could be blurry.
Warning:
Please check the diagram below for the trapezoid adjustment.

| |
---|---|---
Incorrect Installation| Correct Installation| Incorrect Installation

Installation Method
Contact a professional installer to mount this projector to a ceiling. Follow the instructions below for the correct projector positions. Warning:

1. The projector may be damaged beyond repair if it is incorrectly mounted on a ceiling or on a surface.
2.  The projector should only be used in an environment where the temperature does not exceed the range of 0C-35 ·c. Projector malfunction may occur if this is not adhered to.
3. Malfunction may occur if the projector is subjected to dusty, wet, moist or smoky conditions.
4.  Poor ventilation could cause overheating which could lead to damage to the projector as well as a life threatening situation.

Turn the Projector Operation On/Off
When the projector is connected to a power source, the projector enters standby and the over signal indicator is red.
Operation on: Press the power key on the body or the power key on the remote control, the indicator will turn blue and enter the working state.
Operation off: In the working state, press the power key of the body or the power key on the remote control, the indicator changes from blue to red, and the projector is turned off.

Use of the Projector

When the newly installed projector is used for the first time, the image will be blurred, and it is necessary to focus the picture;
When the picture is blurred, press the focus keys “F+” and” F- “on the remote control to adjust the focal length of the lens. Tap or long press the focus button until the picture is clear. (As shown below)
( Auto focus function is only available in autofocus version. Please do not block the camera while autofocusing.) How to Use Projection Settings
Select “SETTING” on the main interface, after entering setting, select the mode you want in the projection settings.
Projection mode: Front-Desktop/ Rear-Desktop/ Front-Ceiling/ Rear-Ceiling Manual Keystore (Manually adjust the four corners through the arrow keys until the screen can be corrected ) Automatic Keystore (Enable this function, when the device displacement can also keep the picture square ) Automatic Focus (This function is turned on by default, and the screen can be kept square even after the device is displaced. ) Note: Auto-Keystone and Auto-Focus functions are only available in the version with camera.
Note. As the product system is updated from time to time, the specific operation content is based on the actual situation
Digital Zoom (Zoom out or enlarge the image ) Correction Settings
Trapezoidal Correction Reset: Restores the screen to its original proportions Auto Keystone Correction At Power On: It can automatically adjust the square of the screen after booting
Power On Auto Focus: It can automatically adjust the picture to be clear after booting  Note. As the product system is updated from time to time, the specific operation content is based on the actual situation
How to Select the Source
Press the signal source button on the remote control, select the source channel you want to input in the pop-up window, such as HDMI 1/HDMI 2/AV, and then press the “OK” button on the remote control to enter the corresponding source interface. How to Connect to WiFi
Select “SETTING” on the interface, and then select “WIFI Setting”.
After entering the interface, select the WiFi you want to connect to in the list below, then enter the password and complete the connection. Connected will be displayed behind the successfully connected WiFi.

Note. As the product system is updated from time to time, the specific operation content is based on the actual situation Note. As the product system is updated from time to time, the specific operation content is based on the actual situation
How to Connect Bluetooth
Select “SETTING” on the interface, and then select “Bluetooth Setting”. After entering the interface, turn on Bluetooth, search for Bluetooth, and pair Bluetooth. Note. As the product system is updated from time to time, the specific operation content is based on the actual situation
How to Download App
Select “APPS” on the interface, After entering the interface, download the APP you need. Apps can be added through the “APP store”. How to Read Files on U Disk
Select “SETTING” on the interface, and then select “USB”.
After entering the interface, then select your U disk, find the file you want to view in the classification to play. Note. As the product system is updated from time to time, the specific operation content is based on the actual situation

Specifications

Multimedia Format Supported

Video Format: 3GP/AVI/FLV/F4V/MP4/MOV/TS/M2TS/TRP/MKV/VOB/DAT/3GP /MPEG/4K H265
Audio Format: MP3/WAV/AAC/FLAC/OGG/W4A
Image Format: JPG/ JPEG/PNG/BMP/GIF
This model does not support any Dolby audio decoding due to the copyright of Dolby patent.
Note: As the product system is updated from time to time, the specific operation content is based on the actual situation

Troubleshooting

Prowar cable is not connected properly
The power switch is faulty
2.The projector does not work on when using the remote control.| The power switch is turned off
The remote control has no batteries or the batteries are low
The remote control is not being aimed at the IR receiver
The IR receiver is under strong lights.
3.No image.| The input source may not be correct.
No input signal.
The input cable is not connected.
If under PC mode, the PC output frequency is not 50-60Hz. Make sure that the PC output is connected with the projector
If use laptop, check the output signal is HDMI1 or HDMI2
4.Auto-off.| The projector ventilation is blocked.
The voltage is not stable.
The projector has overheated- check that the fan is not broken.

The terms HDMI, HDMI High-Definition Multimedia Interface, HDMI Trade dress and the HDMI Logos are trademarks or
registered trademarks of HDMI Licensing Administrator, Inc.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>