APC SURT10000XLI Smart-UPS RT Specifications and Datasheet
- June 15, 2024
- APC
Table of Contents
APC SURT10000XLI Smart-UPS RT
SURT10000XLI
Smart-UPS RT 10000VA 230V
Commercial status
End of Commercialisation :
Overview
- Presentation : High-density, double-conversion online power protection with scalable runtime.
- Lead time : Usually in Stock
Main:
- Main Input Voltage : 230 V, 400 V 3 phases
- Product or Component Type : Uninterruptible Power Supply (UPS)
- Input Voltage : 220 V – 240 V
- Output Voltage :
- 230 V
- 220 V – 240 V
- Rated Power :
- in W : 8000 W
- in VA : 10000 VA
- Output Connection Type :
- 4 IEC 60320 C13
- 6 IEC Jumpers
- 4 IEC 60320 C19
- Output Connector Type : Hardwire 3-wire (H N + E) 1
- Number of Rack Units : 6U
- Provided Equipment :
- CD with software
- Service manual
- Smart-UPS signaling RS-232 cable
- User manual
- Web/SNMP management card
Batteries & Runtime
- Battery Type : Lead-acid battery
- Number of Battery Filled Slots : 4
- Number of Battery Free Slots : 0
- Battery Recharge Time : 2 hours
- Number of Battery Replacement Quantity : 2
- Battery Charger Power : 955 W rated
- Battery Life : 3 to 5 years
- Extended Runtime : 1
General
- UPS Type : Double conversion online
- Number of Power Module Free Slots : 0
- Number of Power Module Filled Slots : 0
- Redundant : No
Physical
- Color : Black
- Height : 43.2 cm
- Width : 26.3 cm
- Depth : 73.6 cm
- Net Weight : 110.91 kg
- Mounting Location : Front
- Mounting Preference : Lower
- Mounting Mode : Not rack-mountable (Two post mountable: 0)
- USB Compatible : No
Input
- Network Frequency : 50/60 Hz +/- 5 Hz auto-sensing
- Number of Input Connectors :
- 1 hard wire 3-wire (1P + N + E)
- 1 hard wire 5-wire (3P + N + E)
- Input Voltage Limits : 160…280 V
- Input Harmonic Distortion : Less than 7% for full load
Output
- Maximum Configurable Power :
- in VA : 10000 VA
- in W : 8000 W
- Output Frequency : 50/60 Hz +/- 3 Hz user adjustable, +/- 0.1 Hz sync to mains
- Wave Type : Sine wave
- Harmonic Distortion : Less than 3%
- Crest Factor : 3:1
- Bypass Type : Internal bypass (automatic and manual)
- Additional Information : Configurable for 220: 230 or 240 nominal output voltage
Conformance:
- Product Certifications : C-Tick, CE, GOST, VDE
- Standards : EN/IEC 62040-1:2019/A11:2021, EN/IEC 62040-2:2006/AC:2006, EN/IEC 62040-2:2018
Environmental:
- Ambient Air Temperature for Operation : 0…40 °C
- Relative Humidity : 0…95% non-condensing
- Operating Altitude : 0…10000 ft
- Ambient Air Temperature for Storage : -15…45 °C
- Storage Relative Humidity : 0…95% non-condensing
- Storage Altitude : 0.00…15240.00 M
- Acoustic Level : 55 dBA
- Heat Dissipation : 2262 Btu/H
- IP Degree of Protection : IP20
Communications & Management
- Free Slots : 0
- Preinstalled Device : Network management card 2 with environmental monitoring
- Alarm : Alarm when on battery, distinctive low battery alarm, overload continuous tone alarm
- Emergency Power Off : Yes
Surge Protection and Filtering:
- Surge Energy Rate : 1265 J
- Noise Suppression : Full-time multi-pole noise filtering, 0.3% IEEE surge let-through, zero clamping response time, meets UL 1449
Packing Units
- Unit Type of Package : 1 PCE
- Number of Units in Package 1 : 1
- Package 1 Height : 55.2 cm
- Package 1 Width : 59.7 cm
- Package 1 Length : 99.1 cm
- Package 1 Weight : 129.09 kg
Offer Sustainability:
- Sustainable Offer Status : Green Premium product
- REACh Regulation : REACh Declaration
- EU RoHS Directive : Compliant EU RoHS Declaration
- Mercury Free : Yes
- RoHS Exemption Information : Yes
- Environmental Disclosure : Product Environmental Profile
- Circularity Profile : End Of Life Information
- WEEE : The product must be disposed of in European Union markets following specific waste collection and never end up in rubbish bins
- Optimized Energy Efficiency : Energy-efficient product
- Take-back : Take-back program available
Contractual Warranty
- Warranty : 12 Months
- Product Life Status : End of commercial – Block
SURT10000XLI may be replaced by any of the following products:
SRT10KRMXLI
APC Smart-UPS On-Line, 10kVA/10kW, Rackmount 6U, 230V/400V, 6x C13+4x C19 IEC outlets, Network Card+SmartSlot, Qty 1
You can view and download the full Installation Guide from this link: Installation Guide
Frequently Asked Questions
What is the APC SURT10000XLI Smart-UPS RT?
The APC SURT10000XLI Smart-UPS RT is a high-density, double-conversion online uninterruptible power supply (UPS) designed to provide power protection and scalable runtime for critical equipment.
What is the input voltage range for APC SURT10000XLI UPS?
The main input voltage supported by this UPS is 230V, but it can also accept 400V 3-phase input.
What is the rated power capacity of the SURT10000XLI?
It has a rated power capacity of 8,000 watts (W) or 10,000 volt-amperes (VA).
What types of output connections does APC SURT10000XLI have?
The UPS offers various output connections, including 4 IEC 60320 C13, 6 IEC Jumpers, 4 IEC 60320 C19, and a hard wire 3-wire (H N + E) output.
How long can it provide power during a blackout?
The UPS has an extended runtime of 1, and battery life typically ranges from 3 to 5 years, depending on usage.
Is APC SURT10000XLI UPS rack-mountable?
No, it is not rack-mountable. It has a height of 6U and is designed for other mounting options.
What are the environmental specifications for this UPS?
The operating temperature range is 0 to 40°C, and it can operate at altitudes up to 10,000 feet. Storage temperature ranges from -15 to 45°C.
Does APC SURT10000XLI come with any communication and management features?
Yes, it includes a preinstalled network management card 2 with environmental monitoring and supports alarm notifications and emergency power-off functionality.
Is APC SURT10000XLI energy-efficient and environmentally friendly?
Yes, it is labeled as a Green Premium product and complies with EU RoHS Directive. It is mercury-free and designed for optimized energy efficiency.
What is the warranty for the APC SURT10000XLI?
It comes with a 12-month warranty. However, it is marked as End of Commercial
- Block, which suggests that it may no longer be in production.
What is the purpose of an uninterruptible power supply (UPS)?
A UPS is designed to provide backup power to critical electronic equipment during power outages or fluctuations. It ensures that connected devices receive a continuous and stable power supply.
How does the double-conversion online UPS technology work?
Double-conversion online technology constantly converts incoming AC power to DC power and then back to AC power, ensuring that the connected equipment always receives clean and stable power, regardless of the quality of the incoming power source.
Download The PDF Link:APC SURT10000XLI Smart-UPS RT Specifications and Datasheet