OTE Personal Blender for Shakes and Smoothie Instruction Manual

Product Manual
OTE Blender

Important Safeguards

When using electrical appliances, basic safety precautions should always be followed including the following:

• Readallinstructions.
• Portable – To protect against risk of electrical shock do not putin water orother liquid.
• Thisapplianceisnot intended for use by persons (including children) with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, unlessthey are closely supervised and instructed concerninguse ofthe appliance by a person responsible for their safety. Close supervision isnecessary when any applianceis used by ornear children. Children should be supervised to ensure that they do not play with the appliance.
• Portable – Turn the appliance OFF, then unplug from the outlet when not in use, before assembling or disassembling partsand before cleaning. To unplug, grasp the plugand pull fromthe outlet. Never pull from the power cord. Permanently Installed – Make sure appliance is OFF when notin use, before putting on or taking off parts, and before cleaning.
• Avoid contacting moving parts. Do not attempt to defeat any safety interlock mechanisms. (The second sentence may be omitted if the appliance does nothave any interlocks.)
• Portable – Do not operate any appliance with adamaged cord or plug or afterthe appliance malfunctions, oris dropped or damaged in any manner. Contact the manufacturer at their customer servicetelephone number for information on examination, repair, oradjustment.
• The useof attachments not recommended or sold by the manufacturer may cause fire, electric shock or injury.
• Do not use outdoors.
• Do not let cord hang over edge of table or counter.
• Hand-held, other than cordless types- Do not let cord contact hot surface, including the stove.
• Keep hands and utensils out of container while blending to reduce the risk of severe injury to persons or damageto the blender.
• To reduce the risk of injury, never place cutter-assembly blades on base without jar properly attached.
• Always operate blender with jar in place
• The useof attachments, including canning jars, not recommended by the manufacturer may cause arisk of injury to persons.
• SAVE THESE INSTRUCTIONS

DANGER:
DO NOT immerse the machine or the power cable in water orany other liquid to avoid electrical shock or short circuit!
WARINING:

1. Before connecting to the power supply, please make sure thatthe rated voltage of this product is corresponding to the local voltage. If any incident occured due to the lack of confirmation, the campan); is not responsible.
2. If the supplycord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
3. Close supervision is necessarywhen unit is used.
4. Be sure tounplug the product after use!
5. Do not touch the blade to avoid injury
6. Please do not unscrew the jar when the machine is working!
7. Please clean the product after each use to prevent odor or mold caused by the food residue.
8. Children being supervised not to play with the appliance
9. Be careful if hot liquid is poured into the food processor or blender asit canbe ejected out of the appliance due to a sudden steaming.
10. This appliance is intended for household use only.

****Please pay attention before use:

1. There is a built-in safety mechanism of the machine. The blender will not start working unless the blade base is in place and aligned to the Lock position.
2. When switched off, please wait until the blades stops moving completely before removing the jar to avoid any damage to the machine.
3. When cleaning the blades, please be careful notto get hurt.
4. For the first use, itis normal that there might be some smellof the appliance or the jar, simply clean itwith cleanser. The materials we use tomanufacture this product are allsafe and environment friendly. The jar is made of food grade material, 100% safe  guaranteed.
5. The machine is equipped with built-in overheating and overload protection programs. When the motor is overloaded or when used abnormally, the protection program will be activated and the machine willstop working automatically.

Product Parameters

**Note:** Due to slight differences in product appearance, the wireframe diagram and the schematics are for reference only,

Instructions for use

1. Wash and peel the fruits, remove the cores,then cut the fruits into 10X 10X 10mm cubes.

2. Put the fruit cubes. into the jar, add the right amount of water or milk (or other drink).
   The best blending capacity is advised for 200ml once.

3. Please make surethatthejarandtheblade base are screwed and tightened clockwise, and the jar is in the lock position.

4. After confirming that the local voltage meetsthe rated voltage of the product, plug inthe power cord and press the power switch. The default blending time is 30s.

5. If you need to stop the bleding process within 30s, just press the power switch again.

6. Unplug the product after blending.

7. After blending, unscrew the jarand the lade base counter clockwise, then remove the blade base from the jar to drink the juice directly from the jar or pour it into other containers.

Helpful Tips:
The machine is set to work 30s before automatic shut off. If you want the blender to be smoother, just run it once again.
If you need to stop the blender process within 30s, just press the power switch again.
If the machine gets stuck during use, please hold it upside down to make sure there is no hard food stuck between the blades, then restart it to try again.
The light shines white color when the machine is working;

Cleaning & Maintenance

Immediate detachment and cleaning is necessary after use. Please refer to the following cleaning steps:

1. Unscrew the jar off of the main part, please note that the main part is not washable. To clean the main part, please use a damp cloth. It must not be put in a sterilizer, either; the blade edges are sharp, please be careful not to get hurt;
2. Rinse the detached parts under a water faucet or wash them in warm water with cleanser;
3. After juicing, add clean water in the juicer cup immediately then install it back to the main part and blend for about 5s, which can provide better cleaning of the jar;
4. If the components are colored by the blender, you can remove the color by wiping the component with few drops of oil before washing;
5. After rinsing the components, wipe them dry thoroughly.
   Maintenance:
   Itis recommended to use the machine frequently to keep the motor dry;
   If not in use for a long time, please store the machine in a dry and ventilated place.

Trouble Shooting

thejarand the blade base tightly in place, and make surethey are aligned to the Lock
The blades get stuck| The blades get stuck by the food when starting| Turn the blender upside down and shake
Too much food or the food is too hard| Reduce the amount of food in the jar
The ingredients are too sticky| Remove food from blender
Abnormal smell, noise| Too much, too large or too hard food in the jar| Reduce the amount of food in the jar
The continuous working time is too long, which cause the motor to overheat| Shorten theblendingtime
The ingredients is hot| Turn off the machine and let the food cool down belovr 60 degrees celcius
leackage from the base or the cup lid| The lid is not tightly installed| Saew the lid and the jar tightly together
The seali ng ring is not correctly installed| Open the jar, adjust the sealing ring
The blender stops working abruptly (within 30s pre-set working time| `working The water or the ingredients amount added into the jar isinappropriate| Add the right amount of water ingredients

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>