8BitDo 6922621503736 Arcade Stick for Xbox Instruction Manual

Arcade Stick for Xbox — instruction manual

6922621503736 Arcade Stick for Xbox

• Press the Xbox button to turn on the Arcade Stick
• Hold the Xbox button for 6 seconds to turn off the Arcade Stick
• Hold the Xbox button for 12 seconds to force the Arcade Stick off

**** Windows

• required system: Windows 10 (1903) or above

Wireless connection

1. connect the 2.4G receiver to the USB port of your Windows device
2. turn the mode switch to gamepad mode
3. press Xbox button to turn on the Arcade Stick, wait till the Arcade Stick is successfully recognized by the device, status LED stays solid

Wired connection

1. turn the mode switch to gamepad mode
2. connect the Arcade Stick to your Windows device via USB cable, wait till the Arcade Stick is successfully recognized by the device, status LED stays solid

Xbox

• Xbox Series, Xbox One consoles are supported, Xbox 360 console is not supported
• The latest firmware version of your Xbox console is required

Wireless connection

1. connect the 2.4G receiver to the USB port of your Xbox device
2. turn the mode switch to gamepad mode
3. press Xbox button to turn on the Arcade Stick, wait till the Arcade Stick is successfully recognized by the Xbox console, status LED stays solid

Wired connection

1. turn the mode switch to gamepad mode
2. connect the Arcade Stick to your Xbox console via USB cable, wait till the Arcade Stick is successfully recognized by the Xbox console, status LED stays solid

Button Swap

1. press and hold any of the two buttons you would like to swap, then press the star button to swap them
2. press and hold any of the two buttons which have been swapped and press the star button to cancel it
   • the profile LED will blink continuously when the swapped buttons are pressed
   • the swapped buttons will not be saved after the Arcade Stick is turned off
   • Joystick, view/menu/share and Xbox buttons are not supported

Volume Control

• beeps when adjusted to maximum/middle value/minimun1
• press and hold profile + up/down to turn up/down in-game volume
  2
• press and hold profile + left/right to adjust the balance between voice and game volume
  

Battery

• build-in 1000mAh Li-on rechargeable battery with 30 hours of play time (20 hours when connected with headphones) and with 4 hours charging time

Ultimate Software

• press profile button to activate customised profiles. The profile LED will not light up when using the default setting
• It gives you elite control over every piece of your Arcade Stick: customize button mapping, adjust stick & trigger sensitivity, and vibration control. Please visit support.8bitdo.com for the application

Re-pair the Arcade Stick and Receiver

follow the steps below to re-pair the Arcade Stick and receiver:

1. with the Arcade Stick off, press and hold the star and profile buttons, then press Xbox button to turn on the
   Arcade Stick, the status LED will blink rapidly

2. plug the receiver into the USB port of your Windows device or Xbox console, wait for the Arcade Stick to pair with the receiver automatically

3. the LEDs on both Arcade Stick and receiver will stay solid when the connection is successful

Support:
• Please visit support.8bitdo.com for further information & additional support

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>