8BitDo 81HC Ultimate C 2.4G Wireless Gaming Controller Instruction Manual

8BitDo 81HC Ultimate C 2.4G Wireless Gaming Controller

Button Function Description

Ultimate C 2.4G Wireless Controller

• press the home button to turn on the controller. (The controller will stay in the previous mode)
• hold the home button for 3 seconds to turn off the controller.
• hold the home button for 8 seconds to force the controller off.

Follow the steps below to re-pair with the receiver:

1. Connect the 2.4G receiver to the USB port of your device
2. Press the home button to turn on the controller
3. Hold the view button for 5 seconds to enter its pairing mode, the LED starts to blink rapidly
4. Wait for the controller to automatically pair with the receiver, the LED remains solid to indicate a successful connection

Windows

Windows

required system: Windows 10 (1903) or above.

Wireless connection

1. connect the 2.4G receiver to the USB port of your Windows device.
2. press & hold X+home to turn on the controller, and wait till the controller is successfully recognized by your Windows device, status LED stays solid to play.

Wired connection

1. Press & hold X+home to turn on the controller.
2. Connect the controller to your Windows device via the USB cable, wait till the controller is successfully recognized by your Windows device, status LED stays solid to play.

Android & Raspberry Pi

Android & Raspberry Pi

OTG support is required on your Android device, please contact your manufacturer for more information.

Wireless connection

1. Connect the 2.4G receiver to the USB port of your device.
2. Press & hold B+home to turn on the controller, wait till the controller is successfully recognized by your device, and the status LED stays solid to play.

Wired connection

1. Press & hold B+home to turn on the controller.
2. Connect the controller to your device via the USB cable, and wait till the controller is successfully recognized by your device, the status LED stays solid to play.

Turbo function

Turbo function

• status LED blinks continuously when the button with turbo functionality is pressed.
• D-pad and joysticks are not included.
• hold the button you would like to set turbo functionality to and then press the star button to activate/deactivate its turbo functionality.

Battery

Battery

25 hours of playtime with a 480mAh built-in battery pack, rechargeable with 2 hours of charging time.

Status LED indicator

• low battery red LED blinks
• battery charging red LED stays solid
• battery fully charged red LED turns Off.

Support

Support
Please visit support.8bitdo.com for further information & additional support.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>