Lugano 48 Inch LED Bathroom Mirror User Guide
- June 4, 2024
- Lugano
Table of Contents
OPERATING INSTRUCTIONS
48 Inch LED Bathroom Mirror
For after-sales questions, please contact BaldwinfNancy@outlook.com.
Button 1: Touch this button in order to turn the lights ON / OFF. Touch and hold this button in order to dim the light intensity.
Aftercare Instructions:
- Clean using a soft dry cloth only when turned off
- Never use harsh cleaning agents, chemicals, or abrasive materials
- Do not allow moisture or solutions of any kind to stay on the mirror surface or light strips, clean immediately
LED Bathroom Mirror Lugano Collection
Product Features:
Copper-free Silver Mirror
Dimmable LED light
HARDWIRE INSTRUCTIONS
Warning: The manufacturer’s warranty shall be void if a product is not
installed by a licensed professional.
Prior to commencing installation, please ensure the following:
- the wall where the product is being installed is able to support the weight of the product
- the main electrical supply has been powered off to complete the installation
- Green = GROUND wire. connect to the ground wire in your box, or to the box as a ground.
- White = LIVE wire. connect to the White LIVE wire in your box.
- Black = Neutral wire. connect to the Black Neutral wire in your box.
- Match the three wires from the mirror to the main supply.
- Safely connect these three wires one by one.
INSTALLATION INSTRUCTIONS
Warning: Manufacturer’s warranty shall be void if a product is not installed by a licensed professional.
-
Prior to commencing installation, please ensure the following:
– the wall where the product is being installed is able to support the weight of the product
– the main electrical supply has been powered off to complete installation -
Steps for Installation:
1. Decide on a leveled mounting position and mark the holes
2. Drill the holes and insert anchors
3. Insert the dowels into the anchors
4. Hang the mirror on the mounting panel
5. Remove the front protective film before use