ZEMISMART ZM-H1 Zigbee Wave Smart Switch User Manual
- June 15, 2024
- ZEMISMART
Table of Contents
User Manual
Zemismart Zigbee Wave
Smart Switch
Specification
| Product name | Zigbee wave smart switch |
|---|---|
| Product model | ZM-H 1 |
| Protocol | Zigbee 3.0 |
| Input Voltage | AC 100~240V |
| Load | ≤600W/gang |
| Wireless standard | IEEE 802.15.4(2.400-2.484GHz) |
Note: Please power off before installation
Installation
-
Use a small screwdriver to open the glass cover from the notch.
-
Load the wall cassette and fix screws, cover the plate.
-
Supply power, it will with RGB light cycle in 2 times.
Pairing mode
-
Remove the glass.
-
Press and hold the setting button for 7 seconds, it will with a di-da-di-da sounds, and the RGB lights keep running, it means that entering pair mode.
-
Use Tuya app to discove it.
Connect to Tuya APP
-
Open Tuya app-Zigbee hub-Add subdevice.
-
Click “LED already blink”.
-
Click “Done”.
-
Connection succeeded.
How to use it
Wave your hand near to the switch within 15cm,it will be turn ON/OFF.
-
Turn ON the switch RGB light cycle in 2 times, then lights up blue (medium brightness), then turns off after 10 seconds.
-
Turn OFF the switch
RGB light cycle in 2 times, then lights up white (maximum brightness), then turns off after 10 seconds.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>