Easilok A7 Twist to Lock Storefront Door Lock Keyless Instruction Manual
- June 15, 2024
- Easilok
Table of Contents
Easilok A7 Twist to Lock Storefront Door Lock Keyless
Product Information
Model A7
The Model A7 is a Twist-to-Lock Cabinet Cam Lock that offers keyless access. With this lock, you never have to worry about keys being copied again. It provides a secure and convenient solution for locking cabinets.
Specifications
- Product Type : Cabinet Cam Lock
- Lock Type: Twist-to-Lock
- Keyless Access: Yes
Product Usage Instructions
Installation
- Align the lock with the cabinet’s lock hole.
- Twist the lock clockwise to secure it in place.
Locking and Unlocking
- To lock the cabinet, twist the lock clockwise until it stops. To unlock the cabinet, twist the lock counterclockwise until it releases.
Troubleshooting
- If you encounter any issues with the lock, please refer to the troubleshooting section in the user manual or contact our customer support.
Twist-to-Lock Cabinet Cam Lock keyless Never worry about keys being copied again
-
Cabinet Cam Lock Installation Instructions
-
Before installation, please check and make sure below tools were included in the package. If there are missing or damaged tools, do not install or use, contact the after-sales service of EASILOK for
replacement. -
This lock features 3/4〞(18mm)outside cylinder diameter with a 7/8〞(20mm)、31/32″(25mm) or 1-1/8″(30mm) length that will accommodate up to 9/16〞thick panels.
-
This lock features 3/4〞(18mm)outside cylinder diameter with a 7/8〞(20mm)、31/32″(25mm) or 1-1/8″(30mm) length that will accommodate up to 9/16〞thick panels.
-
Product Installation(1)Lock the Anti-Medlock button .When the keyhole of the lock is vertical to the ground,align the lock with the cabinet keyhole and insert, then fixt it by tightening the screw nut with the wrench.
-
Install the latch plate :before installation, please firstly confirm the rotate-direction of the lock plate(plate throw direction). Left throw direction of plate: when lock the cabinet it requires a counterclockwise rotation ,then it is left throw direction of plate. Right throw direction of plate: when lock the cabinet requires a clockwise rotation, then it is right throw direction of plate.
If it is left throw of plate
(counterclockwise turning to lock the cabinet),firstly set the commutator
adjuster to be(seebelow red line in the picture ),and then make the
trapezoidal gap of the lock face to the upper right side ,at last fix the lock
plate by tightening the anti-loose gasket and screw with a screwdriver.
If it is right throw of
plate(clockwise turning to lock the cabinet),firstly set the commutator
adjuster to (see below black line in the picture),and then make the
trapezoidal gap ofthe lock face to the upper left side ,at last fix the lock
plate by tightening the screw with a screwdriver.
-
In the last step, turn the knob to test whether the installation is correct. If it cannot be used normally, check the above steps to reinstall.
Website : www.easilok.com www.aisecure.group
Service : service@agradelock.com
Support : support@easilok.com
Facebook page : easilok
website : www.aisecure.group Installation Video